CAS Number: 66-81-9
Molecular Weight: 281.35
Chemical Formula: C₁₅H₂₃NO₄
Solubility: Ethanol, methanol
Storage Temp: 2-8°C

Antifungal antibiotic that inhibits protein synthesis in eukaryotes. Blocks translation of mRNA on the ribosome derived from Streptomyces griseus.

WARNING! This product can expose you to Cycloheximide, a chemical which is known to the State of California to cause developmental harm. For more information go to www.P65Warnings.ca.gov.

Research or further manufacturing use only, not for food or drug use.

• Appearance: White to Off White Crystalline Powder
• HPLC (Purity): ≥ 96.0 %
• Identification (HPLC): Conforms
• Melting Point: 102 - 120 ^oC
• Potency: ≥ 950 µg/mg
• Solubility: Soluble In Chloroform; Ethanol, Methanol
• Water Content: < 0.3 %

Proudly made in the USA! Click here for more made in America products!
  

PR1MA™ Acrylamide/bis-Acrylamide, 19:1 Ratio Solution

CAS Number: 79-06-1; 110-26-9; 7732-18-5
Storage Temp: 2-8°C

A 40% solution containing 38% (w/v) Acrylamide and 2% (w/v) bis-Acrylamide for a monomer to crosslinker ratio of 19:1.

WARNING! This product can expose you to Acrylamide, a chemical which is known to the State of California to cause cancer, developmental and reproductive harm. For more information go to www.P65Warnings.ca.gov.

Research or further manufacturing use only, not for food or drug use.

• Appearance: Clear, colorless liquid
• Conductivity of Solution: ≤ 10 µmhos
• DNase/ RNase: Not Detected
• Electrophoresis: Pass Test
• pH: Report

PR1MA™ Luria Broth 1 Gram Buffered Capsules [Miller's LB Broth]

Common Name: Miller's LB Broth
CAS Number: 91079-40-2; 8013-01-2; 7647-14-5; 77-86-1/1185-53-1
Solubility: Water
Storage Temp: Room Temperature

High salt formula. Molecular Biology Grade. For maintenance and propagation of E. Coli.

Now available in convenient pre-measured and pre-mixed capsules. Prebuffered media eliminates messy weighing and pH adjustments.

Simply dissolve 25 capsules per 1 Liter of distilled water. Water must be 37°C or warmer to completely dissolve gelatin capsule. Agitate. Sterilize by autoclaving for 15 minutes before use. Buffer is set for 7.0 ± 0.2 at 25°C using a 10mM solution of Tris/Tris HCl. pH will vary depending on temperature.

Ingredients:

• Tryptone: 10 g/L
• Sodium Chloride: 10 g/L
• Yeast Extract: 5 g/L
• Tris/Tris HCl: 1.5 g/L

Research or further manufacturing use only, not for food or drug use.

• Appearance: Capsules
• pH (2.5% H₂O @25 °C): 6.8 - 7.2
• Microorganism (E. coli ATCC 23724): Growth
• Microorganism (E. coli ATCC 33694): Growth
• Microorganism (E. coli ATCC 33849): Growth
• Microorganism (E. coli ATCC 39403): Growth
• Microorganism (E. coli ATCC 47014): Growth
• Microorganism (E. coli ATCC 53868): Growth

PR1MA™ Lactobacillus MRS Broth Powder

Solubility: Water
Storage Temp: Room Temperature

Recommended for the selective isolation and enumeration of lactobacilli.

Ingredients:

• Peptic Digest of Animal Tissue: 10.0g
• Beef Extract: 10.0g
• Yeast Extract: 5.0g
• Ammonium Citrate: 2.0g
• Dextrose: 20.0g
• Polysorbate 80:1.0g
• Sodium acetate: 5.0g
• Magnesium Sulfate: 0.1g
• Manganese Sulfate: 0.05g
• Sodium Phosphate, Dibasic: 2.0g

Research or further manufacturing use only, not for food or drug use.

• DCM Appearance: Homogeneous, free flowing with soft lumps, yellow beige to yellow tan
• PPM Appearance: Clear, no to light ppt, medium to dark amber
• Microorganism (Lactobacillus Casei ATCC 393 ): Good to Excellent
• Microorganism (Lactobacillus Fermentum ATCC 9338 ): Good to Excellent
• Microorganism (Lactobacillus Plantarum ATCC 8014 ): Good to Excellent
• Microorganism (Lactobacillus Rhamnosus ATCC 9595 ): Good to Excellent
• pH (5.5 % Solution @25 ^oC): 6.3 - 6.7

PR1MA™ Sodium Citrate, Trisodium Salt, Dihydrate, [Citric Acid, Trisodium Dihydrate]

Common Name: Citric Acid, Trisodium Dihydrate
CAS Number: 6132-04-3
Molecular Weight: 294.1
Chemical Formula: C₆H₅Na₃O₇  2H₂O
Solubility: Water
Storage Temp: Room Temperature

Research or further manufacturing use only, not for food or drug use.

• Appearance: White crystalline powder
• Assay: ≥ 99.0 %
• pH (5% Solution): 7.0 - 9.0
• Alkalinity: Pass Test
• Chloride: ≤ 50 ppm
• Heavy Metals : ≤ 10 ppm
• Identification Tests: Passes Tests
• Loss on Drying: 10.0 - 13.0 %
• Sulfate : ≤ 150 ppm
• Tertrate: Meets USP Test
• Grade: Meets current USP Specifications

• Appearance: Yellow Crystalline Powder
• Crystallinity: Pass
• Identification: Pass
• Loss on Drying: ≤ 2.0 %
• pH (1% Solution in Water)@ 25°C: 2.3 - 3.3
• Potency: ≥ 900 µg/mg
• Specific Rotation: -250 - -235°

PR1MA™ HEPPS [N-(2-Hydroxyethyl)piperazine-N'-(3-propane sulfonic acid)] [EPPS]

Common Name: HEPPS [N-(2-Hydroxyethyl)piperazine-N'-(3-propane sulfonic acid)] [EPPS]
CAS Number: 16052-06-5
Molecular Weight: 252.3
Chemical Formula: C₉H₂₀N₂O₄S
Solubility: Water
Storage Temp: Room Temperature

Research or further manufacturing use only, not for food or drug use.

• Appearance: White Crystalline Powder
• Assay (Titration, dried basis): ≥ 99.0 %
• Loss on Drying: ≤ 1.0 %
• pH (1mol/L in Water @ 20 ^oC: 5.0 - 7.0
• Solubility (0.1M in water): Clear and Colorless

PR1MA™ Streptomycin Sulfate

• Appearance: Fine White Powder
• Appearance of Solution: Clear
• Abnormal Toxicity: Meets The Requirements
• Bacterial Endotoxins : ≤ 0.25 IU/mg
• Colorimetric: ≥ 90.0 %
• Identification: Complies
• Loss on Drying (EP): ≤ 7.0 %
• Loss on Drying (USP): ≤ 5.0 %
• Methanol (GC): ≤ 0.3 %
• pH: 4.5 - 7.0
• Potency (Dried basis): ≥ 720 µg/mg
• Residual Solvents: No Class 1, 2, 3 or other residual solvents are present
• Streptomycin B: ≤ 3.0 %
• Sulfate: 18.0 - 21.5 %
• Sulfated Ash: ≤ 1.0 %
• BSE/TSE: BSE/TSE Free

PR1MA™ IPTG [Isopropyl-β-D-thiogalactopyranoside], Dioxane Free

Common Name: Isopropyl-β-D-thiogalactopyranoside
CAS Number: 367-93-1
Molecular Weight: 238.3
Chemical Formula: C₉H₁₈O₅S
Solubility: Water, ethanol
Storage Temp: 2-8°C

IPTG is combined with X-GAL to detect lac+ colonies or cells in a colorimetric assay. Distinguishes recombinants (white) from non- recombinants (blue) in cloning strategies using vectors such as Lambda-11, M13mp 18 and 19, pUC18 and 19, pUR222 containing the lacZ gene.

Dioxane-Free
Water Content: <0.49%

Research or further manufacturing use only, not for food or drug use.

• Appearance: White Crystalline Powder
• Assay (HPLC): 98.0 - 101.0 %
• Purity (HPLC): ≥ 99.0 %
• 1,4-Dioxane: Not Detected
• Absorbance @300nm (5% w/v sol in H₂O): ≤ 0.13
• Absorbance @400nm (5% w/v solution in H₂O): ≤ 0.06
• Identification: IR Concordant with Standard
• Melting Range: 110 - 114 °C
• Moisture Content (KF): ≤ 1.0 %
• pH (5% in water): 5.0 - 7.0
• Solubility: Soluble in Water and Methanol
• Specific Optical Rotation: -34.5 - -28.5 ^o
• BSE/TSE Free: BSE/TSE Free
• Non Animal Origin: Non Animal Origin
• Country of Origin: Report

PR1MA™ Benzamidine Hydrochloride

CAS Number: 1670-14-0

Molecular Weight: 156.6

Chemical Formula: C7H8N2 • HCl

Solubility: Water

Storage Temp: 2-8°C

Competitive serine protease inhibitor which forms stable complexes with and blocks the active sites of enzymes. Target enzymes include trypsin, hymotrypsin, kallikzein and plasmin.

Shipping Weight: 0.3 lbs

Shipping Dimensions: 3.50 x 3.75 x 3.50

Research or further manufacturing use only, not for food or drug use.

Specifications

• Appearance: White crystalline powder
• Assay (HPLC): ≥ 98.5 %
• Loss on Drying: ≤ 2 %
• Residue on Ignition: ≤ 0.5 %
• Material Source: Chemical Synthesis
• BSE/TSE Free: BSE/TSE Free
• Country of Origin: Report 

Proudly made in the USA! Click here for more made in America products!
  

Labcon MetalFree® Centrifuge Tubes

• Made of 100% medical grade ultra low metal virgin resins
• Certified below one part per billion (<1ppb) for trace metals
• Natural colorant-free flat caps
• Autoclavable (122°C) & Freezable (-80°C)

Labcon’s MetalFree® centrifuge tubes are specifically processed to ensure that common trace metals and elements that can interfere with experiments are below an ICP-MS detection level of one part per billion (<1ppb). These tubes are perfect for storage of samples and for applications requiring the assurance of low background metals.

Metals included in testing are: Calcium, Magnesium, Zinc, Iron, Copper, Manganese, Aluminum, Silicon, Nickel, Vanadium, Sodium, Phosphorous, Cobalt, Chromium, Potassium, Lithium, Selenium, Cadmium, Mercury, Arsenic, and Lead.

All package versions are sterilized with a validated and approved ISO 11137 method. Racked tubes are packaged in recyclable fiber racks.

Proudly made in the USA! Click here for more made in America products!
  

Labcon LTS Style Low Binding Tips - Bulk Lid

SuperSlik® Low Retention tips have a proprietary modified polypropylene surface that limits the adhesion of cells, rDNA, proteins, and other viscous materials. Their accuracy and precision is up to 10 times better with viscous samples than standard non-wettable polypropylene. SuperSlik® tips are made from our own proprietary resin formulation that uses no additives or coatings that migrate into your samples. Unlike low retention tips from many others, SuperSlik® tips use no restricted chemicals and meet RoHS regulations. The resin helps increase the contact angle of fluids and lets you dispense the maximum amount of sticky DNA molecules. These tips were developed in our own laboratory and have been found to be ideal for viscous samples. Low retention tips are best suited for pipetting thick or sticky fluids and may not be appropriate for all uses.

1161 – SuperSlik® 10 uL Pipette Tips with UltraFine™ Point
1162 - SuperSlik® 10 uL Extended Length Pipette Tips with TubeGuard™
1165 - SuperSlik® 10 uLL Extra-Long Pipette Tips
1065 - SuperSlik® 200 uL Pipette Tips with BevelPoint™
1167 - SuperSlik® 100 uL Pipette Tips for Eppendorf® Pipettors
1164 - SuperSlik® 250 uL Wide Orifice Pipette Tips for Whole Cells
1166 - SuperSlik® 250 uL UltraFine™ Point Pipette Tips
1169 - SuperSlik® 300 uL Pipette Tips with BevelPoint™
1168 - SuperSlik® 1250 uL UltraFine™ Point Pipette Tips
1066 - SuperSlik® 20 uL Pipette Tips for Rainin® LTS™ Pipettors
1067 - SuperSlik® 250 uL Pipette Tips for Rainin® LTS™ Pipettors
1160 - SuperSlik® 300 uL Pipette Tips for Rainin® LTS™ Pipettors
1068 - SuperSlik® 1000 uL Pipette Tips for Rainin® LTS™ Pipettors 

Packaging

Proudly made in the USA! Click here for more made in America products!