• Adjustable tilt and speed for exact level of agitation
• Safe for incubator and cold room use
• Durable construction
• Double platform option expands usable space
• 1 year warranty

MIDSCI's ProBlot 35 Deluxe Rocker is made for those laboratories requiring a larger platform area and precise control over rocking parameters.

Both speed and degree of tilt are adjustable across a broad range to provide the exact level of agitation required for all types of samples. The rocker is equipped with a 2 hour timer that can also be set for continuous operation.

The heavy duty motor and sturdy rocking platform can support loads of up to 10 pounds. Closed loop, solid state speed control ensures that the rocker operates at constant speed regardless of voltage or load fluctuations. Permanently lubricated ball bearings provide years of maintenance-free operation.

The ProBlot 35 Deluxe Rocker is available with a single platform, or for added workspace, two stacked platforms. Each platform is covered with a nonslip rubber mat to keep sample containers in place. The rocker can be used in environments from 4° to 65°C, making it safe for cold room or incubator use.

Efficient 3D Lab Shakers
The three-dimensional shaking motion of the GyroTwister GX-1000 is extremely efficient, yet gentle, making this shaker ideal for general mixing as well as staining gels, hybridization and other applications. Shaking speed is continuously adjustable across a broad range. A nonslip rubber mat and elastic tie-downs hold samples in place during operation. A dimpled mat is included for holding tubes in place. Larger platforms and a stacked standard platform configuration are available to increase shaker capacity.
GyroTwister 3D Shaker Product Features Include:

• Gyratory action provides gentle yet thorough mixing
• Hybridization, staining gels, immuno-staining and general mixing
• Safe for use in temperature-controlled environments
• Double platform and larger platforms available

Permanently lubricated ball bearings on moving parts provide quiet, maintenance-free operation. The sturdy base lends stability to the unit. The GyroTwister 3D shaker is safe for use in temperature-controlled environments, up to 65°C. Standard 30 x 30 cm platform and tube mat are supplied with the shaker,

• Staining, hybridization, washing, etc.
• Compact size, low profile
• Extremely quiet
• Double platform option expands usable space
• 1 year warranty

The Labnet Economy Rockers, ProBlot 25 and 25XL, are basic rocking platforms that have been designed for a long life and trouble-free service.

Rocker speed is adjustable to provide the gentle motion required for staining fragile gels as well as the more vigorous action necessary for washing blots. The rocking movement is fixed at ±7°.

The platform surfaces are covered with nonslip rubber pads to prevent objects from moving during operation. Elastic tie downs are available to secure in place bags, boxes, tubes and other containers. The platform assemblies pivot on permanently lubricated ball bearings for quiet, maintenance-free operation. The ProBlot 25 platform measures 28.9 x 20.3 cm, while the ProBlot 25XL platform is slightly larger at 30 x 30 cm. For increasing the work area without sacrificing valuable bench space, a second platform can be stacked on the first.

The ProBlot 25 and 25XL Rockers can be used safely in temperature controlled environments up to 85°C. Their low profile and compact size make them perfect for use in small incubators.

• Ideal for mixing samples in blood and centrifuge tubes
• Fixed speed and pitch
• Safe for cold room use
• CSA compliant
• 1 year warranty

The GyroMini is a smaller version of our popular GyroTwister. Its small size makes it ideal for mixing samples in blood and centrifuge tubes.

Like the GyroTwister, the GyroMini combines the motions of an orbital shaker and a rocker to produce a three dimensional action. The result is a thorough yet gentle mixing without foaming. Both the speed and tilt angle of this small shaker are fixed to provide the optimal level of agitation for mixing samples in small containers.

The GyroMini is supplied with a dimpled mat for holdidng tubes firmly in place. For temperature sensitive samples, the GyroMini can be used in a cold room.

Specifications

Need Cold Storage in a Hurry?

MIDSCI™ Delivers Fast with ABS|American BioTech Supply!

5-8 Days Shipping on Fast Track Freezers & Refrigerators

Check out the Laboratory FastTrack | Pharmacy FastTrack flyers for full details.

 

 

Items are subject to change without notice. Fast delivery options may end at any time and are dependent on stock availability and location. 

While we strive to ensure the accuracy of all product descriptions and shipping timelines,

delivery times may vary based on factors such as order volume and shipping carrier performance. 

MIDSCI™ and ABS|American BioTech Supply reserve the right to modify or discontinue promotions at their discretion.

All terms and conditions apply.

Freestanding Countertop Refrigerator

The Hi/Lo Profile Rocker is designed for versatility on benchtops, in high humidity or dry incubators, in high temperature ovens (up to 65°C) and refrigerated units (up to 0°C).

Ideal for the following applications:

Staining and Destaining gels, Northern and Southern Hybridizations, Western Blotting and Rinsing Membranes, Cell Culture Incubation and Phage Elutions or Amplification of cDNA libraries.

The Hi/Lo Profile Rocker fits easily into laboratory incubators, ovens and/or refrigerated units without rearranging shelves or disturbing other materials. The platform tilt is continuously adjustable from 2 to 11 degrees. The variable speed control allows running this system from 0 t0 22 rpm. A maximum of 3 rocker platforms can be added to increase capacity when using the same amount of bench space.

Input Voltage: 115V
Platform size: 12x12 in. (30x30 cm)
Max RPM: 22
Max Load: 20lbs.

1 year warranty

Available platforms doubles, triples and even quadruples capacity.

• CO2 incubator compatible
• Digitally controlled speed, up to 80 cycles/min
• Adjustable tilt from 1 to 18 degrees
• Multiple sizes and with 2, 3 and 4 platforms 
• 4 year warranty -   designed to last, rugged construction
• Made in the USA

• Infinity Rocker Pro (IR101) - 11x14 inch platform
• Infinity Rocker Mini (IR102) - 8x9 inch platform
• Infinity Rocker XL (IR103) - 20x16 inch platform 
  

• 11 x 14, 8 x 9, and 20 x 16 inch (28 x 36, 20 x 23, and 51 x 41 cm) platforms.

• Removable TIER 2 stacking trays double the support surface area. The trays just snap onto the platform and their spring loaded legs hold them securely in place.

Double, Triple and Quadruple Deckers:

• Stack 2, 3 & 4 versions provide 2 - 4 times as much capacity. The 2, 3 & 4 platforms each tilt about their own axis

• Offer a microcontroller to accurately control the speed to within 1 RPM. With the digital speed control, you can set the speed in increments of 1 RPM, from 1 to 80 RPM.

Clearance between levels on rockers:

IR211-12 inches of clearance in between the platforms; ideal for using 2 Stabilizers
IR301- 6.5 inches of clearance in between the platforms
IR401- 4 inches of clearance in between the platforms

Frequently Asked Questions:

Specifications:

Will these rockers work with different voltages (in different countries)?

Yes. The rocker uses 24V DC supplied by a small external power supply that plugs into a wall outlet. Next Advance will supply the appropriate power supply for the local power and wall outlet configuration.

What is the maximum load?

The rocker can handle 11 lbs. (5 kg).

What is the range for the tilt angle?

The amount that the rocker platform tilts back and forth can be adjusted from as little as +/- 1 degree to as much as +/- 18 degrees.

What is the difference between Infinity Rockers and Next Rockers?

Infinity Rockers and Next Rockers are both rugged, quiet, rockers with lots of power. Infinity Rockers have digital speed control and a digital display of the rocking rate in cycles per minute (cpm). Because Infinity Rocker motors are brushless, i.e. do not have brushes that can wear out, they will last for many years.

What is the rocking rate?

For Infinity Rockers, the rocking rate can be as slow as barely moving to a maximum speed of 80 cycles per minute (160 rocking motions per minute). Next Rockers are available in a regular speed range (4 to 80 cycles per minute) or super slow (1 to 20 cycles per minute).

What are the Super Slow versions?

The Next Rockers come in standard and super slow versions. For those applications that require slow, smooth rocking, we recommend the super slow (up to about 20 cycles per minute) versions. They provide finer speed control at the lower speeds. The motor in these versions is geared down for slower operation and greater power, just as gears on a bicycle allow for more power at lower speeds.

Can I use these rockers in incubators or cold rooms?

Our rockers can operate in incubators (up to 60°C) or cold rooms (down to 4°C) if the temperature is kept constant and the humidity is not excessive. Temperature swings which cause condensation will damage the electronics and void the warranty. In fact, the electronic circuitry includes additional heat sinks to ensure reliable operation at elevated temperatures.

Operation:

How do I adjust the tilt angle?

To adjust the angle, use a flat blade screwdriver to loosen the labeled screw on the rear of the instrument, slide the linkage to the desired position, then tighten the screw.

How do I adjust the rocking rate?

You can turn the knob on the front of the instrument to adjust the rocking speed.

Can I clean the rubber mat?

Yes. You can remove the rubber mat from the platform and clean it with soap and water. Let it dry before placing it back on the platform.

NuZar Water System Set, U24 

NuZar water system set, U24 produces ultrapure water (Type I water) and RO water from tap water directly. Quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards. The NuZar water purification systems are compact and powerful. They are specifically designed for laboratories that demand a balance between cost of ownership and exceeding their purified water requirements.

The system is CE/RoHS certified. RephiLe provides full documents support to meet user’s GMP, GSP, GAP, GCP, GLP requirements.

Simple Installation and Maintenance

• RFID tracking of consumables (RO Pack included) for enhanced management
• Easy to remove consumable access cover
• Automatic RO membrane cleaning cycles (Cl2 and pH cleaning)
• Mercury-free germicidal UVC LED lamp preinstalled in tank sanitation module 

Reliable Water Quality and Stable System Performance

• Automatic hourly recirculation of ultrapure water
• Stable RO permeability over a wide range of temperatures
• Diversion to drain if quality of RO permeate falls below a pre-set set-point

Data Traceability

• Automatic data backup for up to 2 years and easy data transfer through multiple interfaces, such as LAN, USB, etc. 

Low Running Cost

• Environmentally friendly. High recovery rate
• Self-maintenance functions
• RFID record of cartridge history/highly-efficient cartridge

Compact and Small Footprint

• All-in-one design and placement flexibility - on the bench or on a wall 

Main Components

• Cartridge
• Ergonomic dispenser with 2.4 In. color touch screen
• Storage Tank

Uvitec ESSENTIAL V6 + 26MX

Get all your essentials covered with the most compact, yet performing Gel Documentation system:

• DNA/RNA gels, Safe stains, Protein gels, Colonies... You won't believe what a well-designed, simple configuration allows you to do!
• Basic yet fully-automated, stainless-steel made, with 16-bit camera, up to 65,535 shades of grey, and 100% license-free software.
• Take benefit of an outstanding resolution of up to 6-mpx to turn your samples into beautiful, sharp images.
• Use default acquisition protocols or create, modify and customize your own as you please.
• Get perfectly-exposed pictures in no time with the fully-auto 'one-touch' acquisition mode.
• 'Uvipure' patented technology available on transilluminator for even sharper images of all your safe-stained gels.
• Built-in analysis modules for quantification/normalization, molecular weight, colonies counting and distance calculations.

Applications:

• DNA/RNA gels & Safe stains (EtBr, SYBR, GelGreen, GelRed, SYPRO...) Protein gels (Coomassie, Silver, Cooper...) Colonies (Petri Dish) & visible imaging, X-ray films

Analysis:

• 1D quantification, normalization, automatic molecular weight, distance calculations, colonies counting

Haier -40°C Biomedical Freezer BP Series

Used in blood banks, hospitals, disease control centers, research institutes, electronic, chemical, and other industries for the cryopreservation of plasma, biologics, and other products. Cold tests for components and materials.

• Microprocessor-controlled system with temperature display precision at 0.1º C. Internal temperature is adjustable from -20ºC to -40ºC.
• Multiple alarm functions: High/low temperature, sensor error, power failure, low battery, high ambient, and door ajar alarms. Alarm mode is sound and flash. Remote alarm interface is available.
• Superior temperature uniformity in a large storage space: Built-in evaporator design. Shelf height can be adjusted according to the size of the stored articles for efficient use of large space in the cabinet.
• Low sound level: Noise level less than 45 dB, providing a more comfortable environment   

Specifications

MIDSCI offers two undercounter medical grade and stackable refrigerator and freezer options from Summit. 

The FF7 Medical Grade Refrigerator is counter height and slim width (24 inches) so can fit in tight spaces in your lab. This refrigerator has a fully reversible door for flexible placement. The refrigerator is auto-defrost and has a unique "hidden" evaporator set behind the rear wall which creates a seamless interior. Inside, the generous storage capacity and flat door liner can accommodate large trays with dimensions up to 19½ X 16 inches and the unit has a rocker switch, located behind the adjustable thermostat, to turn the interior light on and off.

The VT65 Medical Grade Freezer can be used stand alone or stacked with our Summit FF7 Medical Grade Freezer. It is a front opening freezer with slim width and comes complete with front-mounted lock and alarm. The externally mounted thermometer provides temp readout and includes alarm to warn of internal changes. Manual defrost ensures that vaccines & pharmaceuticals remain stable while three slide-out basket drawers minimize temperature fluctuations when the door is open.

Double sided non- cooled vertical system, 10cm x 10cm

•     Heavy duty upper buffer chamber with cooling port connections.
•     Lower buffer chamber.
•     Interlock safety lid with attached leads.
•     Casting base.
•     Two-pack each of plain & notched glass plates.
•     One acrylic blocker plate (used when running only one gel).
•     Ttwo 10-well, 0.8mm thick combs
•     Four 0.8mm thick side spacers.

•     Alumina cooling plate. For use with cooling systems. This plate can be sandwiched between the gel and the inner buffer chamber to improve overall temperature uniformity.
•     Casting base. For quick, efficient and leak-proof casting.
•     Multiple gradient caster.