Replacement filters, bulbs, and cartridges designed for use with the Rephile® DirectUP and PURIST water purification systems.

MyTemp™ 65 Heating and Cooling Incubator

The myTemp 65 Incubator is designed to provide accurate and uniform temperature control from 0 to 60°C. The broad temperature range of the instrument expands the use of this incubator for both heating and cooling applications.

A large, digital display allows for visualization of the chamber temperature and the remaining incubation time, while an internal light is included for improved visualization of the chamber. In addition, a built-in, internal outlet can be used to provide power to small instruments, such as shakers, rockers, etc.

With forced air technology and stainless steel inner construction, uniform heat transfer is ensured throughout the internal chamber. When set for sub-ambient temperatures, the powerful compressor is activated, quickly cooling the chamber to the desired temperature.
With an exterior height of 39 inches (100cm), the incubator is designed to be floor-standing, yet is also compact enough for bench-use. (Not recommended for use on benchtops taller than 32"/81cm). The instrument is supplied with two, adjustable height shelves, while additional shelves can also be purchased separately (item: H2365-SH).

• Accurate temperature control from 0° to 60°C
• Powerful compressor maintains 0°C
• Stainless-steel internal chamber
• Internal power outlet for shaker, mixers, etc.
• Sized for floor-standing use or on bench-tops less than 32" tall

Specifications
 

Temp. Range:	0°C to 60°C (RT-25°C to 60°C)
Temp. Accuracy:	0.5°C (at 37°C)
Temp. Uniformity:	+/- 1.0°C (at 37°C)
Temp. Increment:	0.1°C
Exterior Dimensions: (WxDxH)	21.25 x 21 x 39.35 in.
Interior Dimensions: (WxDxH)	15.75 x 12.75 x 19.75 in.
Capacity:	65L (2.3 cu. ft.)
Weight:	117 lbs
Refrigerant:	R134A
Electrical:	120, 60HZ or 230V, 50Hz (385W)
Warranty:	2 Years
Operating Temp. Range:	+10 to +30°C

 

SHEL LAB SMI2 Microbiological Incubator

• 7" color display module
• Capacitive touchscreen usable with laboratory gloves
• Real-time clock for logging events
• Door alarm
• On-screen data graphing
• 4-20 mA output for chart recorder or central facility recording
• Interior outlet
• Viewing door
• Stainless steel interior
• 24-month limited warranty

SMI2 SHEL LAB Microbiological Incubator is 2 cubic feet (56.3 L). This benchtop unit is perfect for general cell culture and constant temperature applications.
The SHEL LAB Microbiological Incubator Series has been redesigned for optimum performance. Ranging in size from 2 to 11.7 cubic feet (57 to 331 liters), the SMI Series will fit any workspace.

NEW - Touch Screen

Significantly updating SHEL LAB's General Purpose Incubators, the new 7 inch display provides advanced control functions. With on-screen graphing and real time data, the new SMI controller provides the highest levels of sample security and traceability.
 

Specifications

SHEL LAB Benchtop

The SSI3 has a transparent hood that lifts up via a hydraulic system so it will function in tight places. All of our shaking incubators feature stainless steel interiors which provide excellent durability and an easy-to-clean surface. Each unit has an easy-to-read LED display. The rotation platform is included with each unit and is self-centering for easy installation.

All major functions  temperature, RPM and time  have alarms that alert the user to deviations from set parameters. Overtemperature protection is provided via a safety thermostat. Digital keypad operation offers the ability to calibrate the temperature controller to a reference thermometer.

To better support the load over years of constant use, we utilize four load bearing positions for optimal weight distribution.

Features include:

• Microprocessor Control
• Load Flexibility
• Shaking Platform Included
• Independent Controls for Temperature, Timer, and Shaker
• Full Line of Shaking Access

Shel Lab B.O.D. Thermoelectric 

SmartDoc™ 2.0 Imaging System

• Imaging enclosure works with all common smartphones
• System includes blue light illumination base, orange viewing cover, and orange photo filter
• Ideal for common safe stains (SmartGlow™, SYBR Green, GelGreen™, etc.)
• Visible blue light will not damage DNA
• Gel viewing and gel access for DNA band cutting
• Optional amber viewing glasses, for band excising
• Imaging enclosure can also be used on existing transilluminators

Introducing the SmartDoc™ 2.0 (Item no. E5001-SDB). This complete system has been developed for safely viewing nucleic acids in agarose gels and for capturing quality digital images with a smartphone camera.  Blue light is used instead of UV, which is safer for lab personnel and will not damage DNA samples.

The SmartDoc™ Imaging Enclosure can also be purchased separately (item no. E5000-SD) without the blue light illumination base.  The enclosure by itself can be used on most existing UV transilluminators or blue light transilluminators for smart phone imaging.

The illumination base emits an intense blue light with a peak output of 460 nm for optimum excitation of nucleic acids stained with green fluorescent dyes (SYBR® Green, SmartGlow™, GelStar™, GelGreen™, etc). The orange cover fits on top of the illumination base and acts as a filter to absorb blue light, allowing visualization of the fluorescing samples. The cover can also be set at an angle for gel access and cutting out DNA bands for further study.

The SmartDoc™ imaging enclosure includes an orange photo filter for photography of the gels with a smartphone. An extending adapter can be inserted for full dimension imaging of gels up to 15 x 15 cm or removed for close-up pictures. The enclosure can also be used directly on any other existing UV or blue light transilluminator.  Additional filters are available for imaging gels on a UV transilluminator.  Please see our “Filter and User Guide” to show which filter is best for different imaging applications.

Optional SmartBlue™ Plus Viewing Glasses

Accuris SmartBlue™ Plus Viewing Glasses offer exceptional protection for researchers working with bright blue LED and UV light illuminators. The polycarbonate filter lenses are shatter proof, scratch resistant and block light in the UV (280 nm) to blue (490 nm) wavelengths. In addition, they are compliant with ANSI Z87.1.

These glasses are ideal for general protection when working with hazardous wavelengths and for precision DNA band cutting on a UV or blue light transilluminator. While blocking hazardous UV and blue light, the glasses allow clear visualization of DNA bands stained with Ethidium Bromide, SmartGlow™, SYBR Green and other fluorescent dyes. 

*Always wear appropriate UV protection for eyes and exposed skin when working with UV light sources.     

Specifications 
 

Item # E5001-SDB is proudly made in the USA! Click here for more made in America products!
 

 
3D Stackable Mini Roller

• Wide range of speed adjustments for a variety of applications
• Anti-corrosive and wear-resistant construction for use in humid and CO₂ environments
• Easy to add or remove rollers to fit different-sized tubes or bottles
• A stackable mechanism allows two units to be stacked for space savings
• A remote control box makes it easy to operate the unit while it is in an incubator

Specifications:
 

Model	MR-03UA
Number of Roller Bars	11 pcs
Speed	0.5~80 rpm
Speed Accuracy	±1 rpm
Roller Dimensions (D×L)	Ø28 x 269 mm (Ø1.1 × 10.6 in.)
Swing Dimensions	18 mm (0.71 in.)
Available Tubes or Bottles	Max. Ø120 mm (4.72 in.) bottles/tubes
Max. Load	6.5kg (14.33 lbs) with the container, 3 × 1,500 mL bottles
Digital Display	Roller Speed Display
Timing Range (Control Box)	0~999 min or continuous operation
Included Accessory Standard in Packaging	MRA02, MRA03, MRA05
Ambient Temperature	5 ~ 60
Relative Humidity	≤95%
Power Supply	AC110 / 60Hz
Max. Power	10W
Dimensions (D×W×H)	360 x 378 x 72 mm (14.17 x 14.88 x 2.83 in.)
Net Weight	6.5kg (14.33 lbs)
Stacking	Optional
Protection Level	IP21
Certifications	cCSAus, WEEE, RoHs, CE

 

MDPI-3000 Direct Thermal Printer

• Fine Detail: Print text & barcodes with 300 DPI resolution
• Easy to Use: Comes with Label LIVE design software for Windows and macOS
• Easy Adjustment: Fully adjustable sensor for use with a variety of label sizes
• Wide Print Width: Full-size print up to 4 In. (102 mm)
• High Capacity: Fits roll diameters up to 4.25 In. (108 mm)