With the B series incubator, you obtain a reliable and powerful unit in a solid configuration at a very attractive price. Series feature: Incubators Classic Line with mechanical adjustment

Features:

• Temperature range: 30°C to 70°C
• Hydro-mechanical thermostat
• Inner door made of tempered safety glass
• 2 chrome-plated racks
  

With its wide temperature range and extensive program functions, a BINDER cooling incubator ensures reproducible conditions in the microbiology laboratory.

Features:

• Temperature range (Model 23): 0°C to 100°C
• Temperature range (Models 53, 115, 240, 400, 720): -5°C to 100°C
• APT.line¢ preheating chamber technology
• Cooling with compressor cooling unit
• Door heating system from 240 liters
• Adjustable fan speed
• Controller with time-segment and real-time programming
• Elapsed time indicator
• Inner door made of tempered safety glass
• 2 stainless steel racks
• Units up to 115 liters are stackable
• Access port with silicone plug from 240 liters
• Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
• Computer interface: RS 422

Series KB Specifications:

Mini Microbiology and Hematology Incubator

• Ideal for microbiology or hematology applications
• Corrosion resistant chamber
• Three shelf levels
• Door with large viewing area
• Pilot light to indicate heating
• 1 year warranty

Labnet's Mini Incubator is compact and economically priced, yet offers features not typically found in a basic incubator. The housing is all metal, as is the door frame. A plexi-glass window in the door offers full visibility to the interior. One shelf is included, and can be adjusted to three different levels - additional shelves can be purchased to increase storage capacity.

The heating elements in Labnet's Mini Incubator are incorporated into the bottom and sides of the housing. This provides better temperature stability and uniformity than other incubators in it's class. A grommet hole in the top of the unit can hold a thermometer for accurate temperature setting.

In addition, the Mini Incubator has a port in the rear of the chamber which allows for an electrical cord to be routed out the back. Labnet's Mini LabRoller is a perfect fit and can be used in the Incubator with any of the available rotisseries.
 

Specifications

• Eco-friendly with low power consumption & low global warming potential (GWP)
• Easily reverse the door opening
• One degree (± 1°) from ambient temp. (non-refrigerated)
• Secure-Grip Modular Shelving: shelves are adjustable, removable and can easily be swapped between models
• Run-Silent Operation (softer than normal conversation)
• Intelligent temperature control with cross directional airflow for maximum heat distribution (no interior fan)
• Self-Close 90°: Door will automatically close at any angle under 90°
• Two (2) Year Warranty
• FDA registered manufacturer
• External access ports on rear panel for connecting devices such as shakers and rockers

Series BD-S Solid.Line | Standard-Incubators with Gravity Convection

Benefits

• Easy handling
• Accurate temperature control
• Simple and ergonomic door opening

Important characteristics

• Temperature range: ambient temperature +5°C to 70°C
• APT.line preheating chamber technology
• Gravity convection
• Adjustable exhaust air flap
• Controller with timer function
• Inner door made of tempered safety glass
• 1 chrome-plated rack, incl. shelf supports
• Class 3.1 integrated independent temperature safety device (DIN 12880) with visual alarm

The new products in the Solid.Line impress with their tried-and-tested BINDER quality and reliability. They are suited to incubation. The attributes of the Solid.Line are geared towards the application in question and therefore used in research and quality assurance.

Specifications

*Housing dimensions do not include fittings and connections

Series CB | CO2 Incubators with Hot Air Sterilization and Heat Sterilizable CO2 Sensor

• Maximum usable space with minimal footprint and excellent ease of use
• Minimum risk of contamination thanks to uncompromising hot-air sterilization
• Fanless, easy-to-clean hygienic interior
• Stable pH values thanks to drift-free CO2 IR sensor technology
• Low evaporation of the medium due to high levels of humidity and quick recovery time

Main Features

• Temperature range: from +4 °C above ambient temperature up to +60 °C
• Humidity range: up to 95% RH
• O2control range: 0.2 to 20 vol% O2 for versions with O2 control
• Auto-sterilization with hot air at +180 °C
• Double-pane humidification system with condensation protection
• CO2 gas mixing jet with Venturi effect
• Hot air sterilizable CO2 sensor with infrared technology
• Intuitive touchscreen controller
• Internal data logger, measured values can be read out in open format via USB
• Lockable door handle
• Tightly sealed inner door made of tempered safety glass
• Seamless stainless-steel inner chamber
• 3 perforated stainless-steel shelves
• Units are stackable with stacking adapter
• Troubleshooting system with visual and acoustic alarms
• Computer interface: Ethernet
• Zero-voltage alarm contact

The BINDER CB series CO2 incubator is the premium class among the CO2 incubators. It is suitable for all sensitive incubation applications and ensures optimal cell growth. A BINDER CB series CO2 incubator can perform complex cultivation experiments as well as specific environmental conditions.

CO2 incubators with hot air sterilization and heat sterilizable CO2 sensor
The Binder CB series is a world first! Fitted with a sterilizable CO2 sensor, the incubator meets the highest of standards when it comes to sample safety and cell growth. While C series CO2 incubators have been designed with standard laboratory applications in mind, the BINDER CB comes highly recommended for the incubation of delicate cells, providing optimum growth conditions for cell cultures.

Just like the C series units, the CO2 incubators in the CB series have the option of automatic sterilization with hot air at 180 °C. Plus, they have a heat sterilizable CO2 sensor with infrared technology and come with a double-pan humidification system with condensation protection. The units feature tightly sealed inner doors made of tempered safety glass and a lockable door handle, guaranteeing maximum safety conditions for work in the laboratory.

CO2 incubators with a patented humidity management system
CB series CO2 incubators have a patented humidity management system. The Permadry double-pan humidity system provides active humidity limitation that keeps even the interior walls dry. What's more, evaporation is kept to a minimum thanks to the high humidity.

These CO2 incubators are incredibly user-friendly, with the option to control all of the key parameters at once using the operating panel. Measured values are recorded continually and can be exported as data sets with ease via USB. Navigation is straightforward and intuitive.

The CO2 incubators with hot air sterilization and heat sterilizable CO2 sensor are ideal for the incubation of delicate cells, guaranteeing optimum conditions for cell cultures along with high levels of safety and usability.

Tissue-Tearor

AWAY FROM ELECTIRCAL LINES? The model 780CL Cordless Tissue-Tearor includes a cordless, high speed motor, one probe of your choice, one rechargable 9.6 volt battery pack and a plug-in charger. The maximum speed of the 780CL is slightly slower than the line-operated TissueTearor (25,000 vs 35,000 rpm), it is quite adequate for homogenizing soft tissue like muscle, liver, brain, etc. 

• Use for mixing, emulsification, shredding, or chopping.
• Practical answer for small samples.
• Easy to hold and light weight for one hand operation. Can also be stand mounted.
• Autoclavable stainless steel probes. Inert to aggressive solutions.
• All probes are interchangable probes and are easily removed for cleanup.
• High speed motor. Speed control from 5,000 to 25,000 rpm.

The Tissue-Tearor is a rotor/stator type tissue homogenizer which can rapidly homogenize, disperse, and emulsify samples in 0.2 - 1000 mL of liquid. During operation, the suspended material is drawn into the core of the homogenizer by a rotor turning at up to 25,000 rpm. The material is repeatedly cycled through six narrow slits in the stator where it is rapidly sheared and disintegrated by high frequency mechanical action. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in ten to thirty seconds. Little, if any, heat is produced during the process.
Unlike most other Brands of rotor/stator type homogenizers, the Tissue-Tearor comes complete - that is, with both a motor and a probe (aka, generator, dispersing tool) - both included in one price.

Specifications

• Sample Volume Range: 0.3 to 1000 ml, depending on the probe selected (see table below).
• Universal Motor: 120 VAC, 138 watts or , for overseas applications, 230VAC2
• Variable Speed: 5,000 to 25,000 rpm, incremented by 5000 rpm.
• Probes made of Type 316 Stainless Steel with flurocarbon bushings.
• Weight: Approximately 1/2 Kg.

The myFuge?5 comes with a 4 position rotor for compatibility with both 1.5mL and 5mL centrifuge tubes and a variety of 5 mL test tubes with the included adapters. The rotor accepts 5mL snap cap microcentrifuge tubes and with the included adapters can also accept 5mL blood, culture tubes (12x75mm), and cryovials. Adapter packs are also available to purchase separately for the 0.5mL and 0.2 mL tubes. Simply close the lid and centrifuge accelerates quickly to a fixed speed of 5,500 rpm. Once the lid is opened, the rotor with decelerate to allow for the removal of the tubes.

• For quick spin down of 5mL centrifuge tubes
• Includes adapters for 5mL blood tubes
• Starts and stops with closing/opening of the lid
• Conserves valuable bench space with a small footprint

Vortexer, Tap Dancer Mini Tube

Features

• Compact, with low profile and small footprint
• Pressure sensitive cup
• Continuous or touch operation
• Rubber suction pads prevent walking, absorb vibration
• Low voltage supply for safe cold room use
• 2 year warranty

Operating features

• 5°C above room temperature to 70°C
  
• Microprocess PID control/ Auto-tuning/ Calibration
  
• Digital timer: 1 min to 99 hr 59 min, delayed ON/ OFF
  
• Over-temperature limiter/ Door opening alarm
  
• 3 different temperature values memorable 
  
• Digital LED display (0.1°C resolution) with touch-sensitive keypads
  
• RS-232 interface available
  

  Constructional features

• Fully insulated dual-wall door with rubber magnetic seal gasket keep setting temperature. 
  
• Stackable two high using the stacking kit.(optional)
  
• Optimized sample inspection through a tempered inner glass door without affecting chamber temperature.
  
• Separable Detachable shelves and rounded inner chamber corners for easy cleaning.
  
• Highly durable incoloy heating element with fins that guarantee better radiation.
  
• Attach other electric instruments to the inside of the chamber through a side cable port.
  
• Cable port allow for control of the amount of airflow in the chamber.
  (dia 38mm/1.5°C, Provided silicon or rubber cap)

   

  Specifications

  Model IB-05G IB-15G IB-25G Chamber volume(L/cu ft) 60 / 2.1 102 / 3.6 151 / 5.3 Temperature Range(°C/°F) Amb. +5 to 70 / Amb. +9 to 158 Fluctuation1)(±°C/°F)at 37°C 0.1 / 0.18 0.1 / 0.18 0.2 / 0.36 Variation1)(±°C/°F)at 37°C 0.6 / 1.08 0.2 / 0.36 0.6 / 1.08 Dimension Interior dimensions (W x D x H) (mm/inch) 400x360x420 / 15.7x14.2x16.5 480x410x520 / 18.9x16.1x20.5 610x460x540 / 24.0x18.0x21.3 Exterior dimensions (W x D x H) (mm/inch) 595x555x745 / 23.0x22.0x29.0 675x605x855 / 27.0x24.0x34.0 805x655x885 / 32.0x26.0x35.0 Net weight(Kg/lbs) 45 / 99 55 / 121 62 / 136 Electrical Requirements (230V) 50/60Hz, 1.3A 50/60Hz, 2.2A 50/60Hz, 3.1A Cat. No. AAH21162K AAH21172K AAH21182K Electrical Requirements (120V) 50/60Hz, 2.8A 50/60Hz, 4.6A 50/60Hz, 6.4A Cat. No. AAH21166U AAH21176U AAH21186U

  1) Technical data (according to DIN 12880)