Series ED-S Solid.Line | Drying and Heating Chambers with Gravity Convection

Benefits

• Easy handling
• Accurate temperature control
• Simple and ergonomic door opening

Important characteristics

• Temperature range: ambient temperature +7 °C to 250 °C
• APT.line™ preheating chamber technology
• Natural convection
• Adjustable exhaust air flap
• Controller with timer function
• 1 chrome-plated rack, incl. shelf supports
• Class 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarm

The new products in the Solid.Line impress with their tried-and-tested BINDER quality and reliability. They are suited to drying and heating. The attributes of the Solid.Line are geared towards the application in question and therefore used in research and quality assurance.

Specifications

*Housing dimensions do not include fittings and connections

Vortexer, Tap Dancer Mini Tube

Features

• Compact, with low profile and small footprint
• Pressure sensitive cup
• Continuous or touch operation
• Rubber suction pads prevent walking, absorb vibration
• Low voltage supply for safe cold room use
• 2 year warranty

Operating features

• 5°C above room temperature to 70°C
  
• Microprocess PID control/ Auto-tuning/ Calibration
  
• Digital timer: 1 min to 99 hr 59 min, delayed ON/ OFF
  
• Over-temperature limiter/ Door opening alarm
  
• 3 different temperature values memorable 
  
• Digital LED display (0.1°C resolution) with touch-sensitive keypads
  
• RS-232 interface available
  

  Constructional features

• Fully insulated dual-wall door with rubber magnetic seal gasket keep setting temperature. 
  
• Stackable two high using the stacking kit.(optional)
  
• Optimized sample inspection through a tempered inner glass door without affecting chamber temperature.
  
• Separable Detachable shelves and rounded inner chamber corners for easy cleaning.
  
• Highly durable incoloy heating element with fins that guarantee better radiation.
  
• Attach other electric instruments to the inside of the chamber through a side cable port.
  
• Cable port allow for control of the amount of airflow in the chamber.
  (dia 38mm/1.5°C, Provided silicon or rubber cap)

   

  Specifications

  Model IB-05G IB-15G IB-25G Chamber volume(L/cu ft) 60 / 2.1 102 / 3.6 151 / 5.3 Temperature Range(°C/°F) Amb. +5 to 70 / Amb. +9 to 158 Fluctuation1)(±°C/°F)at 37°C 0.1 / 0.18 0.1 / 0.18 0.2 / 0.36 Variation1)(±°C/°F)at 37°C 0.6 / 1.08 0.2 / 0.36 0.6 / 1.08 Dimension Interior dimensions (W x D x H) (mm/inch) 400x360x420 / 15.7x14.2x16.5 480x410x520 / 18.9x16.1x20.5 610x460x540 / 24.0x18.0x21.3 Exterior dimensions (W x D x H) (mm/inch) 595x555x745 / 23.0x22.0x29.0 675x605x855 / 27.0x24.0x34.0 805x655x885 / 32.0x26.0x35.0 Net weight(Kg/lbs) 45 / 99 55 / 121 62 / 136 Electrical Requirements (230V) 50/60Hz, 1.3A 50/60Hz, 2.2A 50/60Hz, 3.1A Cat. No. AAH21162K AAH21172K AAH21182K Electrical Requirements (120V) 50/60Hz, 2.8A 50/60Hz, 4.6A 50/60Hz, 6.4A Cat. No. AAH21166U AAH21176U AAH21186U

  1) Technical data (according to DIN 12880)

   

• Reduces potential contaminants
• Provides true 360° irradiation
• Proprietary UVC transparent shelf, eliminates potential for missed coverage (blind spots)
• Inactivates DNA, RNA, viruses and bacteria on PCR tools and vessels
• Adjustable cycle time

Short-wave UV light is an effective method for the disinfection of surface DNA, RNA and microorganisms. With the UV Clave, highly focused UV irradiation is used to disinfect tools, vessels and other research items, eliminating up to 99% of surface contamination.

Unlike most UV chambers, the UV Clave includes powerful UV-C bulbs on both the top and bottom of the chamber. When combined with our proprietary shelf that allows for >90% of UV-C light transmission and highly reflective chamber walls, the result is true 360° exposure with no blind spots.

Exposure time is adjustable. An optional heating cycle can be added to assist in drying items that may have been washed or chemically disinfected prior to placing them in the chamber.

To protect users, the integrated auto shut-off prevents illumination when the door is open. Optional indicators are available to test for proper exposure levels.

Specifications

Series CB-S Solid.Line | CO2 Incubators with Hot Air Sterilization

Benefits

• Minimum risk of contamination thanks to +180 °C hot air sterilization
• Stable pH values thanks to drift-free CO2 IR sensor technology
• High humidity up to 95% RH
• Simple and fast cleaning thanks to a seamless inner chamber

Important characteristics

• Temperature range: +6 °C above ambient temperature to +50 °C
• Humidity range: 90 to 95% RH
• Auto-sterilization with hot air at +180 °C
• Humidification system with condensation protection
• CO2 gas mixing jet with Venturi effect
• CO2 sensor with infrared technology
• LCD to display temperature and CO2 along with additional information and alarms
• Internal data logger, measured values can be read out in open format via USB
• Tightly sealed inner door made of tempered safety glass
• Seamless stainless-steel inner chamber
• Perforated shelves, stainless steel
• Units are stackable with stacking adapter
• Troubleshooting system with visual and acoustic alarms
• Computer interface: Ethernet
• Zero-voltage alarm contact
• Can be stacked with CB model of the same size

Series CB-S incubators are suitable for routine cell cultivation applications: They are free from contamination due to 180 °C hot-air sterilization and reliable pH stability thanks to the drift-free infrared CO2 measurement system.

C series incubators: CO2 incubators with hot air sterilization
BINDER CO2 incubators provide optimum growth conditions for a range of cell cultures. The units guarantee an impressively low risk of contamination and are quick and easy to clean. Plus, thanks to their low running costs, BINDER CO2 incubators make for a sound investment.

C series CO2 incubators feature excellent growth conditions for cell cultures, having been designed for standard applications in the cell laboratory. The proven APT.line™ air jacket system and Permadry technology keep the incubator interior free from condensation, while the 180 °C hot air sterilization can be relied upon to ensure that bacteria and germs are killed, giving you maximum protection against contamination in the CO2 incubator.

CO2 incubators with hot air sterilization that are easy to clean
The incubator design features a seamlessly deep-drawn inner chamber and rounded corners, making it incredibly easy to clean. The two-part rack frames without screws add to this, while also ensuring that the incubator is user-friendly. When C series CO2 incubators are stacked on top of one another, you get an optimum ratio between stand space and usable space and 340 liters of incubation capacity, leaving you to carry out your laboratory work comfortably and efficiently.

Incredibly straightforward and efficient to use, C series CO2 incubators from BINDER provide ideal, reproducible growth conditions for cell cultures. Thanks to the hot air sterilization, spores and bacteria can be killed as necessary, and cells and tissue can be cultivated safely.

• Simple plug & play operations
• Ridge pad design for easy stable tube placement
• Small size uses minimal bench space
• Accommodates tubes from 1.5 mL to 50 mL

The GTR-FS fixed-speed tube rocker is the best choice for basic laboratory tube mixing applications. With its see-saw motion, a fixed speed of 24rpm and an angle of +/-25° it provides optimal mixing. The ridged platform pad design allows the operator to place any tube from 1.5 mL to 50 mL on the unit.

The GTR-2-FS adds another tier for even more capacity.
 
 
Specifications 

Operating features

• From +10°C above room temperature to 220°C
• Microprocess PID control / Auto-tuning/ Calibration
• Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF
• Over-temperature limiter / Door opening alarm
• Conveniently preset 3 most commonly used temperature settings without auto-tuning.
• Digital LED display (1°C resolution) with touch keypads
  

  Constructional features

• Circular fan assisted forced-air convection provides a high uniformed drying performance.
• Moderately sized, spacious, and an easy to grip circular door handle.
• Corrosion-resistant incoloy sheath heater and stainless steel chamber. 
• Two circular adjustable top slide vents helps to control inner air vapor circulation. (dia 38mm/ 1.5")
  
  

  Model OF-01E OF-11E OF-21E Chamber volume (L/cu ft) 52 / 1.8 100 / 3.5 150 / 5.3 Temperature Range (°C/°F) Amb. +10 to 220 / Amb. +18 to 428 Fluctuation1)(±°C/°F)at 100°C 0.4 / 0.72 Variation1)(±°C/°F)at 100°C 3.3 / 5.94 3.3 / 5.94 2.3 / 4.14 Dimension Interior dimensions (W x D x H) (mm/inch) 375x370x370 / 14.8x14.6x14.6 455x430x510 / 18.0x17.0x20 585x460x555 / 23.0x18.1x21.9 Exterior dimensions (W x D x H) (mm/inch) 530x535x737 / 20.9x21.1x29.0 610x595x877 / 24.0x23.4x34.5 740x625x922 / 29.1x24.6x36.3 Net weight(Kg/lbs) 36 / 79.4 47 / 103.6 59 / 130 Electrical Requirements (230V) 50/60Hz, 4.3A 50/60Hz, 6.0A 50/60Hz, 7.4A Cat. No. AAH14012K AAH14022K AAH14032K Electrical Requirements (120V) 50/60Hz, 6.8A 50/60Hz, 8.4A 50/60Hz, 10.1A Cat. No. AAH14016U AAH14026U AAH14036U

  1) Technical data (according to DIN 12880)

BENEFITS:

• Best Uniformity in Class
• Increased Volume of 5.9 cubic feet
• Hot Air Sterilization Cycle at 180°C minimizing the risk of contamination
• Maximum Saturation Without Condensation
• Stable pH-values thanks to drift-free CO2 IR sensor technology
• Easy cleaning thanks to seamless, deep-drawn inner chamber

MAIN FEATURES:

• Temperature range: room temperature plus 7°C to 50°C
• Humidity range: up to 95 % RH
• Auto-sterilization with hot air at 180°C
• Humidification system with condensation protection
• CO2 gas-mixing jet with Venturi effect
• CO2 sensor with infrared technology
• Display with 3-digit, 7-segment LEDs
• Door hinged right or left
• Tightly-sealed inner door made of tempered safety glass
• Seamless, deep-drawn inner stainless steel chamber
• 3 perforated stainless steel shelves
• Units are stackable with stacking adapter
• Troubleshooting system with visual and audible alarms
• Zero-voltage alarm contact

TECHNICAL DATA:

* All technical data is specified for unloaded units with standard equipment at an ambient temperature of +22 °C ±3 °C and a power supply voltage fluctuation of ±10%. The temperature data is determined in accordance to BINDER factory standard following DIN 12880, observing the recommended wall clearances of 10 % of the height, width, and depth of the inner chamber. All indications are average values, typical for units produced in series.

Grant Bio Personal Bioreactors

Grant-bio personal bioreactors provide a "Reverse-Spin" type of agitation and logging of microbial growth in 50 mL tubes in real-time.

RTS-1-US including TubeSpin® Bioreactor 50, TPP®, 20 pcs.
RTS-1C-US with cooling, including TubeSpin® Bioreactor 50, TPP®, 20 pcs.

Features

• Innovative mixing due to reverse spinning of the sample around its own axis
• Due to innovative mixing technology, it is possible to measure the optical density of the probe in real time
• Software has been developed to store, display, and analyze the data in real-time
• Compact device with a low profile and small footprint for personal application
• Temperature control allows use as an incubator, e.g. for cell growth
• Active cooling and temperature profiling via software [RTS-1C-US only]
• The ability to change parameters such as temperature, RPM, and "Reverse-Spin" frequency, allows the achievement of consistency and reproducibility of results
• Programmable Cycling/profiling of cultivation parameters such as temperature, RPM, "Reverse-Spin" frequency
• The ability to remotely monitor the process of cultivation while at home or using a mobile phone

Software features

• Real-Time cell growth logging
• 3D graphical representation of OD or growth rate over time over unit
• Pause option
• Save/Load option
• Report option: PDF and Excel
• Connect up to 12 units simultaneously to 1 computer
• Remote monitoring option (requires internet connection)
• Cycling/Profiling options
• User calibration options for any microorganism

Applications

• Bacterial cultivation with real-time growth kinetics
• Strain screening
• Temperature stress and fluctuation experiments
• Media screening and optimization
• Synthetic and systems biology
• Inhibition and toxicity tests

Shaking Water Baths
 
Operating features

• +5°C above room temperature
• Microprocess PID control / automatic tuning / calibration
• Digital timer for delayed ON/OFF: 1 min to 99 hr 59 min
• Protection against over-temperature
• Digital LED display (0.1°C/ 1 rpm resolution)
• Splash-proof keypad
• Warranty: 18 months standard; 6 additional months upon receipt of warranty card

Constructional features

• Separate control keys for shaker mechanism allowing the unit also to be used as a constant temperature bath
  
• Minimal shock to the samples thanks to the shaker's gentle start feature
  
• Multiple LED displays for setting various values
  
• Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact
  
• Removable shaking carriage designed for external assembly avoiding direct contact with the bath fluid
  
• Minimization of the liquid loss and dripping of the bath liquid into the samples thanks to the included gable cover
  
• Included SUS 304 spring wire rack with double-two-tier providing various ways of glassware settings
  

 

Model		BS-06	BS-11	BS-21	BS-31
Bath Volume		17 L 0.6 Cu Ft	25 L 0.9 Cu Ft	37 L 1.3 Cu Ft	55 L 1.9 Cu Ft
Working Temperature Range		Ambient +5°C to 100°C | Ambient +9°F to 212°F
Temperature Stability*		± 0.2°C | ± 0.36°F
Shaking System	Motion / Speed Range	Reciprocating | 20 to 180 RPM
	Reciprocating Stroke Length	25, 30, 35 mm | 1.0, 1.2, 1.4 in. Available - Standard 30 / 12
Dimensions	Bath Opening / Depth  (W x L, D)	109 x 243, 235 mm  4.3 x 9.6, 9.3 in.	229 x 243, 235 mm 9.0 x 9.6, 9.3 in.	389 x 243, 235 mm 15.3 x 9.6, 9.3 in.	670 x 350, 235 mm 26.4 x 13.8, 9.3 in.
	Overall (W x L x H)	430 x 440 x 355 mm 16.9 x 17.3 x 14 in.	550 x 440 x 355  mm 21.7 x 17.3 x 14 in.	710 x 440 x 355 mm  28 x 17.3 x 14.3 in.	860 x 490 x 355 mm 33.9x19.3x14.0 in.
	Net Weight	26 kg 57 lbs	30 kg 66 lbs	35 kg 77 lbs	42 kg 93 lbs
Round Flask Maximum Mounting Amount in Spring Wire Rack	50 mL	5	16	22	38
	100 mL	3	9	15	22
	250 mL	2	5	8	14
	500 mL	2	4	6	8
	1 L	-	2	3	6
	2 L	-	1	2	3
Maximum Mountable Flask Clamps w/ Universal Platform	50 mL	9	12	20	32
	100 mL	3	9	15	24
	250 mL	2	4	8	12
	300 mL	2	4	8	12
	500 mL	2	4	6	12
	1 L	1	2	4	6
	2 L**	-	1	2	3
	2.8 L**	-	1	1	2
Electrical Requirements (230V,60Hz)***				8.9A	8.9A
Cat. No.				AAH44211K	AAH44311K
Electrical Requirements (230 V, 50 Hz)***				8.9 A	8.9 A
Cat. No.				AAH44212K	AAH44312K
Electrical Requirements (120 V, 60 Hz)		7.1 A	8.8 A
Cat. No.		AAH44063U	AAH44113U

* Technical data (according to DIN 12876)
** 2 and 2.8 L flasks must by opening the bath cover
*** BS-21,31 are provided ONLY for 230 voltage


Ordering Information

AAH44063U	BS-06 Shaking Water Bath with Spring Wire Rack, 17 L / 0.6 Cu Ft, 120 V
AAH44113U	BS-11 Shaking Water Bath with Spring Wire Rack, 25 L / 0.9 Cu Ft, 120 V
AAH44212K	BS-21 Shaking Water Bath with Spring Wire Rack, 37 L / 1.3 Cu Ft., 230 V/50 Hz
AAH44211K	BS-21 Shaking Water Bath with Spring Wire Rack, 37 L / 1.3 Cu Ft, 230 V/60 Hz
AAH44312K	BS-31 Shaking Water Bath with Spring Wire Rack, 55.52 L / 1.961 Cu Ft, 230 V/50 Hz
AAH44311K	BS-31 Shaking Water Bath with Spring Wire Rack, 55.52 L / 1.961 Cu Ft, 230 V/60 Hz
AAA44521	Universal Platform for BS-06 Shaking Water Bath
AAA44522	Universal Platform for BS-11 Shaking Water Bath
AAA44523	Universal Platform for BS-21 Shaking Water Bath
AAA44524	Universal Platform for BS-31 Shaking Water Bath