• Continuously variable speed for gentle mixing or vigorous vortexing
• Optimized counter balance for minimal vibration
• Touch or continuous operation
• Multiple attachment options
• 1 year warranty

Labnet's new variable speed Vortex Mixer VX-200 provides fast, efficient mixing with minimal vibration. The unit features a true circular orbit that allows for even distribution of vortexing across the entire speed range. The CombiCup® head, supplied with the unit, accepts many different tube sizes. A full range of accessories is available to accommodate most common laboratory tubes and plates.

Multi-Therm™ Shaker

• Two models available: Heat only and Heat/Cool
• Interchangeable blocks for tubes 0.2 mL to 50 mL
• Precision contoured wells for uniform heat transfer

The MultiTherm™ Shaker is a temperature-controlled vortexer useful for a variety of molecular biology applications. Despite its modest 8 x 11 in. footprint, all popular tubes and plates are compatible, including as many as six 50 mL tubes. Speed, time, and temperature settings are continuously visible on the LCD, simultaneously showing both actual and selected values. Integral over-temperature control ensures long life, safety, and sample integrity.

Specifications

• Shake and incubate samples simultaneously
• Complete with platforms for tubes and plates
• Intelligent control
• Broad temperature and speed range

Designed for simultaneous heating and mixing of small samples, the VorTemp 56 features interchangeable platforms for microtubes and microplates. Both platforms are supplied with the unit. Temperature in the VorTemp 56 is adjustable over a broad range, making the unit useful for a variety of applications, including bacterial cultures in tubes and microplates. Mechanical convection provides a uniform and stable environment within the chamber. The VorTemp 56 may also be used in the cold room for subambient applications.

Shaking speed as well as acceleration rates are adjustable. Acceleration can be set to three different levels to protect delicate samples.

A microprocessor controls all parameters including temperature and timed operation. Self-diagnostic software continuously monitors the unit for proper temperature and shaking speed, alerting the user to any errors. Heating and shaking are controlled by feedback loops which precisely maintain chosen parameters, independent of load or voltage fluctuations.

The sturdy construction of the VorTemp 56 gives it stability during high speed shaking. The chamber is insulated to maintain temperature and reduce operating noise.

• Large capacity - process 60 microtubes or 4 microplates
• Resuspending, homogenizing, mixing or vortexing
• Sturdy, compact construction
• Suitable for cold room or incubator use
The smallest of the Orbit digital shakers, the M60, P2 and P4 feature variable speed across a broad range, making them useful for a variety of applications. Both time of operation and shaker speed are set and displayed digitally, with their values shown on the large 3 digit LED. Parameters are selected with an easy turn knob. A sturdy base encloses the motor for quiet, vibration free operation. All three models can be used in temperature controlled environments. Their compact size makes them ideal for incubator use.

Orbit P2 Orbit M60 Despite its small size, the Orbit M60 can process up to 60 microtubes at one time. The platform is removable to function as a transfer rack or workstation. 1.5/2.0 ml tubes are accommodated directly while smaller tubes can be used with adapters, sold separately.

Orbit P2 and Orbit P4 These vortexers accept all sizes of standard microplates, including deep well plates. Retaining springs on the contoured steel platform hold samples in place. The Orbit P2 holds two microplates while the Orbit P4 holds four.

Product Specifications
Speed range	100 - 1400rpm
Timer	0 to 99 minutes or continuous
Motion/orbit size	Horizontaly circular, 3mm
Maximum capacity	M60: 60 x 1.5/2.0 ml microtubes
Maximum load	0.66 lb/0.3kg
Ambient operating range	+4° to 65°C
Dimensions (W x D x H)	6.6 x 11 x 6 inches/16.8 x 27.9 x 15.3 cm
Weight	9.5 lb/4.3 kg
Electrical*	120V~, 60 Hz
*Other voltages available upon request

Lab Armor^® Bead Bath

Bead Baths from Lab Armor are designed with the user in mind and are optimized to work with Lab Armor Bath Beads. Bead Bath performs all the essentials, including warming, thawing, incubating, chilling and does so while maintaining a constant temperature just like a water bath. These baths deliver exceptional temperature uniformity up to 80°C. The baths are available in 6L, 14L, and 20L sizes, with and without beads included.
 
Uniform Temperatures - with Bead Bath designed specifically for beads, temperatures are consistent and uniform everywhere in the bath. Thermal uniformity is an amazing ±5 °C at 37 °C and ± 1 °C at 65 °C. Since Bead Bath won't boil off like water, or pose danger of combustion like oil, it is ideal for most applications from 37°C to 400 °C.
 
Fast Start - Bead Bath gets up and running faster and you never need to turn it off. There is nothing to evaporate. Unlike a standard bead-filled water bath, Bead Bath allows you to achieve a new set temperature quickly, without long warm up delays, so you can make quick adjustments.
 
Stays Organized - Unlike water baths that require racks, floats and bottleneck weights, Bead Bath naturally holds things in place without accessories. The types and kinds of vessels that can be used with the Bead Bath aren't limited to water-tight containers. So you can safely incubate multiwall plates and petri dishes-or thaw samples without fear of water wicking under the lids. And vessels can be set into the beads at any angle for better thermal optimization.
 
Low Maintenance - Water baths must be routinely monitored, cleaned and maintained. While it is a good idea to keep an eye on Bead Bath, it rarely needs attention. A bi-weekly or monthly spritz of a biodegradable disinfectant is usually sufficient.

Specifications

Crystal Digital Magnetic Stirrer

Grant-bio V-32 Vortex Mixer

• Handles up to 32 tubes in three different sizes/combinations
• Additional VP-1 flat head for single tube mixing supplied with unit
• Compact rugged design plus powerful motor delivering consistent performance and quiet operation - fits neatly and unobtrusively into the workspace
• Rubber suction pads hold tight to the work surface and prevent the unit from "walking" - they also absorb vibration and prevent its transmission to the workbench
• Extremely easy to operate - select either "continuous" or "touch" operation and turn the knob to adjust the speed from 500 rpm to 3000 rpm
• The 32-socket universal platform for three tubes sizes (16 x 1.5ml, 8 x 0.5 ml, 8 x 0.2ml) and a tip for mixing individual tubes up to 15ml provide maximum flexibility for different applications.
• Operating temperature range: + 4°C to 40°C

The Grant bio V-32 is a versatile multi-vortex mixer for vigorous re-suspension of cells or chemical pellets in tubes up to 1.5 ml, with the facility to mix individual tubes up to 15 mL.

Applications
Typical applications include intensive stirring of bacterial and yeast cells, extraction of metabolites and enzymes from cells and cell cultures, and various DNA operations such as deproteinization of DNA/protein complexes and purification of low molecular weight DNA/RNA fragments in PCR diagnostics.

Specifications

• Quickly dries 2 slides
• Ideal for removing wash buffer from microarrays prior to scanning
• Removeable cassettes conveniently catch all liquid

Prior to scanning a microaray slide, it is necessary to remove all wash buffer. This drying step is critical to obtain the best possible scanning results. Labnet's new Slide Spinner dries 2 microarray slides within a 10 seconds. Simply insert your slides into the cassettes and close the lid. This Slide Spinner quickly accelerated to 4800 RPM, the optimal speed for quick drying without any splashing. Open the lid and the rotor comes to a stop and the dry slides can be removed. The cassettes catch all of the liquid, and can easily be removed, and the liquid can be poured out.

• Simple yet feature-rich operation
• Fixed angle, swing bucket and microplate rotor options available
• Numerous safety features
• Accommodates tubes from 0.2mL to 100mL and microplates

The GCC-MP Multi-Purpose Clinical Centrifuge is a large capacity centrifuge that can be used in a variety of clinical lab applications. The GCC-MP is compatible with virtually any tube typically found in the clinical lab environment and can be customized to your specific applications and methods.

Safety Features:

• Door interlock
• Overspeed detector
• Over-temperature detector
• Imbalance protection
• Automatic rotor identification

• Unique roller with see-saw rocking motion
• Simple plug & play operation
• 5 rollers allow for up to 8 vacuum tubes
• Small size uses minimal bench space

The GTRM-FS roller mixer combines the operation of a vacuum tube roller with a see-saw rocking platform to allow for the ultimate in homogeneity of your blood/urine tubes and other sample types. The GTRM-FS is compatible for use in cold rooms and non-CO2 incubators. The rolling motion is a fixed 36rpm and the rocking motion is set at +/-11°.

Specification 

Benchmark™ BenchMixer™ MP Vortexer

The BenchMixer™ MP is optimally designed to thoroughly mix various commonly used sample vessels. With included holders for tubes and plates, as well as a cup head for pressurized/touch vortexing, the BenchMixer MP is a complete package designed to meet the mixing needs of any laboratory. Mixing speed is adjustable from 200 to 3,000 rpm and time can be set up to 999 minutes or continuous. A unique, automatic recognition feature detects the installed sample holder and adjusts the maximum speed setting accordingly. With a compact footprint (only 5 In. wide) and powerful suction cup feet, the mixer conserves bench space and ensures stability during mixing.

• Accepts a wide range of microplates, including deep well, PCR, Elisa plates, etc.
• Includes tube accessories for vortexing of 1.5 / 2.0 mL, 15 mL, or 50 mL tubes
• Converts to a traditional “touch” mode vortexer with included cup head attachment
• Powerful vortexing at speeds up to 3,000 rpm

Specifications
 

Speed Range	200 - 3000 rpm
Timer	1 sec - 999 hrs.
Orbit	0.12 In. | 3 mm
Dimensions (D x W x H)	8.9 x 5.3 x 2.2 In. | 226.06 x 134.62 x 55.88 mm
Operating Modes	Touch or continuous
Operating Temp. Range	4°C to 65°C
Weight	8.8 lbs. / 4 kg
Electrical	115V AC, 60 Hz, 1.5 A ; 240V AC, 50 Hz, 0.75 A