|◀ 445 - 456 of 465 ▶|
View:


Labcon ZAP™ Slik Aerosol Filter Universal Pipette Tips

ZAP™ Slik Aerosol filter Pipette Tips from Labcon combine the higher standard of ZAP filters with our own unique low retention pipette tips. These aerosol tips provide you with complete protection from sample carry-over at the same time they reduce sample retention. Incorporating a robotically inserted 10 um filter with a sponge-like porous pathway ZAP™ Slik tips have such a small pore they even block fluids in the unlikely event that you should over-pipette. And our SuperSlik®; polypropylene increases the hydrophobicity of tips surfaces, so they have up to 10 times less fluid retention.

ZAP™ Slik Aerosol Filter Pipette Tips have been proven in independent studies to block aerosol contamination. But unlike some leading brands of self-sealing aerosol resistant pipette tips they have no cellulose gum, toluene solvent, or colored dyes in the filter to mix with and contaminate your sample. Also, unlike self-sealing aerosol tips ZAP tips can be autoclaved in a steam autoclave. And ZAP tips will not wick fluids like cellulose filled aerosol resistant tips so you don't have to worry about how you hold your pipettor. Our ZAP tips in sterile racks, like all our other sterile products, receive valid sterilization processing compliant with ISO 11137. So unlike "pre-sterile" tips from other pipette tip suppliers you can use ZAP™ Slik tips for diagnostic and regulated procedures. And ZAP™ Slik tips are RoHS compliant, unlike other low retention tips, so you don't have to worry that additives will migrate into your sample.

  • 1171 - 10 uL ZAP™ Slik Pipette Tips
  • 1172 - 10 uL Extended Length with TubeGuard ZAP™ Slik Pipette Tips
  • 1173 - 10 uL Extra-Long ZAP™ Slik Pipette Tips
  • 1175 - 20 uL ZAP™ Slik Pipette Tips
  • 1143 - 20 uL ZAP™ Slik Pipette Tips for Rainin® LTS
  • 1174 - 100 uL ZAP™ Slik Pipette Tips
  • 1179 - 200 uL ZAP™ Slik Pipette Tips
  • 1144 - 200 uL ZAP™ Slik Pipette Tips for Rainin® LTS
  • 1146 - 200 uL Wide Orifice ZAP™ Slik Pipette Tips
  • 1178 - 300 uL ZAP™ Slik Pipette Tips
  • 1142 - 300 uL ZAP™ Slik Pipette Tips for Rainin® LTS
  • 1147 - 300 uL Extended Length ZAP™ Slik Pipette Tips
  • 1177 - 1000 uL ZAP™ Slik Pipette Tips
  • 1145 - 1000 uL ZAP™ Slik Pipette Tips for Rainin® LTS
  • 1148 - 1000 uL ZAP™ Slik Wide Orifice Pipette Tips

Packaging

96 Rack
Offer workhorse reliability and versatility. They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves. Smooth rounded edges and a reinforced seal make these racks durable additions to your lab. Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting. A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile. The long thin design of the 192 rack allows for more working space on the lab bench.

Eclipse UNO Refills
Bring the same ease, value, and low carbon footprint of Eclipse refills to aerosol filter tips. These refills use a validated sterile process and include an expiration date on every pack. Eclipse packaging in made exclusively from recyclable and renewable materials.

Proudly made in the USA! Click here for more made in America products!

Item#:
ASLABZAPSLIKFILT


Labcon C-Pette Blood Transfer Dispenser

  • For safe and efficient blood dispensing
  • Ideal for Point-of-Care (POC) use with any analyzer
  • Minimizes aerosols
  • Reduces the risk of lab-acquired infections
  • Stainless steel canula

C-Pette blood collection tube dispenser for point of care testing instruments. Dispenses one drop of blood onto test cartridge or cassette. Dispenses blood drops easy with no need to open collection tubes. Fits standard glass or plastic blood tubes with rubber stoppers. Made of polystyrene and Stainless steel. Not Autoclavable. 

Proudly made in the USA! Click here for more made in America products!
 
 

Item#:
ASLABCPETTE


Labcon UVsafe Amber 15 mL and 50 mL Centrifuge Tubes
 
For light sensitive samples. 

  • Certified to block 100% UV light
  • Completely opaque, protecting even the most light sensitive compounds
  • Will still pass visible light so you can see your sample volume
  • Large, white solvent-resistant writing panel
  • Caps & tubes feature recycling codes
  • Plug caps are autoclavable when attached to UVsafe tubes
  • Accurate, easy-to-read printed graduations
  • Max RCF printed on the tube
  • Freezeable (-80°C) and autoclavable 122°C), as long as caps are loosely attached to the tubes

Plug Caps

  • Secure seal for extended storage
  • Made from high-density polyethylene
  • Autoclavable (122°C), as long as caps are loosely attached to the tubes

Proudly made in the USA! Click here for more made in America products!
 
 

Item#:
ASLABAMBERTUBES


Labcon Tip Top Dispenser Caps

  • Convenient and Easy: Just tilt the tube and squeeze Tip Top® slightly to dispense one drop onto a slide.
  • Safe Dispensing: You don't need to open the tube preventing spillage and exposure to infectious agents.
  • Very Low Evaporation: A flexible cap is available to cover the Tip Top® so you can store samples longer.
  • Medical Grade Resins: USP Class medical grade resins and packaging.

Safe Dispensing of Blood Samples
 

Tip Top® Dispenser Caps A safe and cost-effective way of dispensing samples in your lab. The Tip Top® is a disposable cone shaped cap that fits all standard 13 or 16 mm blood collection tubes. A small opening allows you to dispense a sample without removing the Tip Top cap so you can prepare smears on slides or dispense into reagent wells or microcentrifuge tubes safely. Inside the tip of the Tip Top® is an integral porous filter that removes fibrin from the blood sample allowing for a perfect smear.

Tip Top® is a convenient alternative to pipetting from an open blood tube, just tilt the tube and squeeze to dispense one drop. And Tip Top® is safe you don't need to open the tube and pipet out of the tube so spillage is reduced along with potential exposure to infectious disease. Just carefully remove the stopper and replace with Tip Top®.

The Tip Top® dispenser cap can be used with almost any liquid. Made from chemically resistant polyethylene they can dispense serum, reagents, plasma, whole blood and CSF. The integral porous polyethylene filter efficiently separates serum and can also be used a a reagent blender.

Fits standard 13 x 100 and 16 x 100 collection tubes.

Proudly made in the USA! Click here for more made in America products!
 
 

Item#:
ASLABTIPTOPDISP

Looking for replacement tubes? Check out PR1MA Microcentrifuge Tubes here! 

Labcon SuperSlik® Microcentrifuge Tubes

  • High centrifuging to 20,000 x G
  • Freezable (-80°C)
  • Autoclavable
  • Capacity: 1.5 mL
  • ATP, RNase/DNase and Endotoxin Free (non-pyrogenic)
  • Attached flat snap caps

SuperSlik® low retention microcentrifuge tubes have a low protein binding surface that minimizes sample loss during sample manipulation.  Ideal for applications such as mass spectrometry (ms), immunoprecipitation (IP), co-immunoprecipitation (Co-IP).  Leakproof snap caps may be penetrated by a syringe and will no pop open during autoclaving.  Compatible with many thermal cyclers and able to tolerate centrifuge speeds up to 20,000 RCF.

Proudly made in the USA! Click here for more made in America products!
 
 

Item#:
ASLABSUPERSLIK


Labcon Security Cups for Urine or Specimen Collection

  • 100 mL Cups
  • Sample spouts may be cut with scissors or pierced with a syringe
  • Impact and pressure resistant seal

These security containers are designed to provide secure and reliable tamper-proof seals for specimens in transit or storage. After specimen collection the screw cap is tightened first by hand, then by the special wrench, which engages teeth on the lids rim to create a locked and leak-proof seal. To access the specimen for testing procedures, large or small sample spouts may be cut with scissors or pierced with a syringe. Spouts can be resealed with the large or small plugs and returned to storage for further testing. The impact-resistant, durably constructed, and pressure-resistant seal offers excellent protection during handling and transport. Made of non-reactive polyethylene resin.

Proudly made in the USA! Click here for more made in America products!
 
 

Item#:
ASLABURINECUPS

Labcon SuperSpin® Microcentrifuge Tubes

  • Ultra-high centrifuging up to 40,000 x G*
  • Optically clear resin
  • Resin will not interfere with DNA or PCR
  • For Phenol/Chloroform vortexing
  • Reduced Thumb Force
  • Autoclavable (122°C) and freezable (-80°C)
  • Packaged in resealable bags
  • Tubes have flat pierceable caps and a side writing surface
  • Graduated

SuperSpin® microcentrifuge tubes were designed with the ability to extract DNA from samples and then amplify that DNA with reliable results in mind.  They can be trusted to spin at high rates and can be opened and closed easily many times to add or remove agents.  The interior surfaces are ultra-smooth with low retention.  The tubes are clear enough to be use in spectrophotometers and have no extractables at the wavelength ranges you use to detect DNA. SuperSpin® microcentrifuge tubes are more than twice as effective at transmitting light than most brands of micro centrifuge tubes.

*Maximum G-force can be affected by organic solvents, multiple spin cycles, or low temperature storage.

Proudly made in the USA! Click here for more made in America products!
 

Item#:
ASLABSSTUBES

 

As of 06/26/23 The items below are being discontinued and will no longer be available when existing supplies are exhausted.

 

3911-545-000-9 | PurePlus® 1.2 mL Sample Library Tubes, In Strips of 8, in 96 Racks, Sterile

3912-545-000-9 | PurePlus® 1.2 mL Sample Library Tubes, In Strips of 12, in 96 Racks, Sterile

3913-855-000-9 | PurePlus® Cap Strips for 1.2 mL Sample Library Tube, In Strips of 8, Sterile

3914-845-000-9 | PurePlus® Cap Strips for 1.2 mL Sample Library Tube, In Strips of 12, Sterile

3915-800-000-9 | PurePlus® 1.2 mL Individual Sample Library Tubes, In Reusable Bags, Non-Sterile

3916-800-000-9 | PurePlus® 1.2 mL Sample Library Tubes, In Strips of 8, In Reusable Bags, Non-Sterile   

 


Labcon PurePlus® Sample Library Tubes 

All racked tubes include rack lids.

  • ATP, RNase/DNase, and Endotoxin Free (non-pyrogenic)
  • Freezable (-80°C)
  • Autoclavable (122°C, 15 minutes)
  • Made of polypropylene

PurePlus® Sample Library Tubes are designed for long-term specimen storage. Caps and tubes come in different packages. Separate closures strips are available. 96 tube format with printed alphanumeric grid and a clear lid.

 

Library tubes available as: Individual tubes, 8-well, and 12-well tube strips.
 

All racked tubes include rack lids. Tube closures are sold separately.

 

Proudly made in the USA! Click here for more made in America products!
 
 

Item#:
ASLABLIBTUBES


96 Place Fluorescent Flipper® Rack

 

The perfect partner for PCR prep work.

 

Our Fluorescent Flipper Racks are crafted to be the perfect partner for PCR preparation, offering reliable performance and easy handling. The dual-sided feature and temperature resilience (-90 to 121°C) ensure your life’s work is protected and your lab runs efficiently. Convenient modeling indexes and varying colors make it easy to keep your space organized.

 

Two-sided rack accommodates 2 tube sizes:

  • Side A: 96 wells for 1.5 mL or 2.0 mL tubes.
  • Side B: 96 wells for 0.5 mL tubes.

Colors: Assorted Fluorescent includes Blue, Green, Orange, Pink, Yellow

*Clear Lid only included with select items

 

Specifications   
 

Dimensions w/ Lid
(D x W x H)
213 x 118 x 50 mm
8.39 x 4.65 x 1.97 in.
Dimensions w/o Lid
(D x W x H)
213 x 118 x 29 mm
8.39 x 4.65 x 1.14 in.
Side AHolds 1.5 - 0.2 mL Tubes
Side BHolds 0.5 mL Tubes
Formation96 Wells, 12 x 8

Proudly made in the USA! Click here for more made in America products!
 

Item#:
ASFLIPPERRK


4 Way Flipper® Rack with Tray

 

Small footprint is perfect for the benchtop or under the hood!

  • Multi-tube compatibility
  • Four 4-Way racks in a convenient tray
  • Each Flipper can be independently oriented
  • 4-way racks can be used in the tray or independently
  • Fluorescent Colors: Green, Yellow, Orange, Pink
  • Standard Colors: Blue, Green, Red, Yellow
  • Dimensions: 243 × 102 × 41 mm

Each rack can be rotated to support a variety of tube sizes including:

  • Twelve 0.5 mL Tubes
  • Nine 1.5 - 2.0 mL Tubes
  • Six 15 mL Tubes
  • Two 50 mL Tubes  

Proudly made in the USA! Click here for more made in America products!
 

Item#:
ASMULTCONFIG1


Microcentrifuge Tube Racks

 

Maximize your lab's efficiency with Microcentrifuge Tube Racks! These racks include frosted writing areas for easy labeling/identification and come with a matching lid to protect your samples. Packaged in units of 5 racks per package, with 4 packages per case.

  • Three models accommodate common tube sizes (0.5, 1.5 / 2.0, and 5.0 mL)
  • Ideal for screw cap microtubes and microcentrifuge tubes
  • Small footprint saves bench and freezer space
  • Side notches facilitate easy lid removal
  • Suitable for temperatures as low as -90ºC as well as autoclaving
  • Racks come with lid 

Specifications
 

Item #5527-005520-005530-00
Dimensions
(D x W x H)
143.8 x 75.2 x 53.0 mm
5.66 x 2.96 x 2.09 in.
143.8 x 75.2 x 53.0 mm
5.66 x 2.96 x 2.09 in.
139.7 x 71.1 x 61.8 mm
5.5 x 2.8 x 2.43 in.
Formation21 wells,
7 x 3
50 wells,
10 x 5
50 Wells,
10 x 5
Tube SizeHolds 5 mL TubesHolds 1.5 / 2.0 mL TubesHolds 0.5 mL Tubes

Proudly made in the USA! Click here for more made in America products!
 

Item#:
ASMCTSTORAGERACK

Please contact us for assistance in finding your best alternative tip option. 

Labcon Eclipse Macro Volume Pipette Tips

  • Designed to fit macro volume pipettors
  • Made of clear, 100% polypropylene
  • Autoclavable (122°C)
  • Available in resealable bags or composite racks
    • 1025 - 5 mL Graduated Macro Pipette Tips for Gilson and Rainin Macro Pipettors
    • 1027 - 5 mL Graduated Macro Pipette Tips for Sartorius and Eppendorf Pipettors
    • 1028 - 5 mL Macro Pipette Tips for Macro Pipettors
    • 1029 - 10 mL Pipette Tips for Macro Pipettors

Proudly made in the USA! Click here for more made in America products!
 
 

Item#:
ASLABECLIPMACRO
|◀ 445 - 456 of 465 ▶|
View: