|◀ 1 - 12 of 291 ▶|
View:



PR1MA Microplate Microcentrifuge

  • Quickly spins down droplets in PCR plates (less than 20 seconds)
  • Accepts skirted, non-skirted, standard, and most microtiter PCR plates
  • 50% smaller than traditional centrifuges
  • Unique rotor design prevents sample spillage

 

The PR1MA Microplate Microcentrifuge is the first mini-sized centrifuge with a swing-out rotor for microplates. Centrifuging plates before PCR ensures all reactants are in the bottom of the wells for proper concentrations and improved yields.

 

The easily accessible rotor chamber includes two plate carriers that rest at a 75° angle. This allows plates to be inserted confidently without sealing tapes or caps. Upon closing the centrifuge lid, the rotor accelerates and the centrifugal force "swings" the plates into a horizontal position, concentrating any droplets on the plate walls to the well bottoms.



Specifications


Speed2550 rpm / 600 xg
Capacity2 x 2 PCR Plates
2 x microtiter plates
(up to 25 mm)
24 x 0.2 ml PCR strips
Deceleration4 seconds
Dimensions9.2 x 10.2 x 7.75 in.
(23 x 26 x 19.7 cm)
Weight9 lbs. | 4.1 kg.
Electrical115V or 230V; 50-60Hz; 250W
Warranty2 Years



Accessories 

 

PCRCENT-A02 - This tube adapter for the PCRCENT Plate Centrifuge holds 96 0.2 mL tubes or 8 and 12 position PCR strips. It comes 2 per pack.

PCRCENT-DWMP - This optional rotor for the PCRCENT Plate Centrifuge has carriers for deep well plates up to 35 mm tall.

Item # PCRCENT is proudly made in the USA! Click here for more made in America products!
 

PR1MA Rapid Coomassie Stain

Chemical Formula: C5H10O5

Solubility: Water

Storage Temp: Room Temperature

This unique Coomassie Blue based formulation features a special dye that is absorbed by protein bands instead of the gel matrix. This eliminates the need for destaining and offers enhanced sensitivity and sharper resolution of bands. Protein bands can be detected within 10 minutes. Maximum intensification may require incubation up to 40 minutes. Offers greater convenience and sensitivity than conventional stains. Compatible with silver staining. Rapid Coomassie stain uses a simple two-step procedure. Stain is designed to detect as little as 7.9ng of protein within one hour of electrophoresis.

Supplied as 20X concentrated solution.

Shelf life is approximately 18 months at room temperature.

Shipping Weight: 0.3 lbs

Shipping Dimensions: 2.00 x 4.00 x 2.00
  • Appearance: Dark Blue Color
  • Concentration: 20X
  • Solubility: Suitable for use in staining protein in polyacrylamide gels
Research or further manufacturing use only, not for food or drug use.
 

Proudly made in the USA! Click here for more made in America products!
 
 

PR1MA Protein Gel-Loading Dye for SDS-PAGE

CAS Number: 7732-18-5; 56-81-5; 7647-01-0; 77-86-1; 151-21-3
Storage Temp: Room Temperature

This dye is added to protein samples prior to electrophoresis on SDS–PAGE gels.

Composition:

Water: 80%
Glycerol: <12%
Sodium Dodecyl Sulfate: <5%
Proprietary Component: <2%
TRIS: <1.0%
Shipping Weight: 0.1 lbs

Shipping Dimensions: 1.50 x 3.50 x 1.50
  • Appearance: Slightly Viscous Dark Purple Liquid
  • DNase, RNase, protease: Not Detected
  • Electrophoresis: Pass Test
  • OPTICAL ABS AT 525 NM: 0.15 - 0.35
  • OPTICAL ABS BETWEEN 588-594 NM: 0.32 - 0.47
  • OPTICAL ABS BETWEEN 635-641 NM: 0.25 - 0.40
Research or further manufacturing use only, not for food or drug use.

Proudly made in the USA! Click here for more made in America products!
 
 

Item#:
ASPROTEINGELLDNSDS


Accuris IsoPure 96 & IsoPure Mini | Automated Extraction Systems 

 

IsoPure 96

  • Operates as a stand-alone system, or connects to PC for programming
  • 8-position carousel for deep well sample plates
  • Intuitive programming and operation on a user-friendly touchscreen
  • Reliable and automated processing of up to 96 samples 

The IsoPure 96 from Accuris Instruments is a high-throughput automated extraction system that improves the efficiency and reproducibility of magnetic bead extractions. Capable of processing up to 96 samples at one time, the instrument is easy to set up and program. Mixing, magnetic bead transfer, washing, and elution steps are performed automatically, saving valuable hands-on time. The complete purification process can be finished in as little as 10 minutes (depending on the reagent kit and the complexity of the program.)

IsoPure Mini

  • Compact design takes up only 8 x 10 inches of bench space
  • Intuitive programming on a user-friendly Android tablet app
  • Higher yields and reproducibility than manual extraction methods
  • Fast and reliable sample processing

The IsoPure Mini from Accuris Instruments is an extremely compact, automated extraction system that improves the efficiency and reproducibility of magnetic bead extractions. Capable of processing up to 16 samples at one time, the instrument is easy to set up and program. Mixing, magnetic bead transfer, washing, and elution steps are performed automatically, saving valuable hands-on time. The complete purification process can be finished in as little as 10 minutes (depending on the reagent kit and the complexity of the program.)

   

Specifications
 

AP1096AP1016
Capacity / Sample Volume96 Samples  /  50 uL to 1000 uL16 Samples  /  50 uL to 1000 uL
Magnetic Bead Recovery Rate>95%>95%
Lysis Temperature RangeRT to 120°CRT to 120°C
Elution Temperature RangeRT to 120°CRT to 120°C
Display7.0 In. Color Screen4.3 In. Color Screen
Programming ControlTouch screen/mouse, or PC connectionTouch screen/mouse, or PC connection
Program Memory100 programs100 programs
Communication PortsUSB, EthernetUSB, Ethernet
Contamination ControlUV SterilizationUV Sterilization
Electrical InputUniversal 120 to 240VACUniversal 120 to 240VAC
Dimensions22 x 24.5 x 19.7 In.
56 x 62 x 50 cm
7.9 x 10.2 x 11.8 In.
20 x 26 x 30 cm

 

 


PR1MA TC9639 Gradient Thermal Cycler

The PR1MA TC9639 Thermal Cycler provides consistent, reliable results for laboratories with medium to high throughput. From its large, touch-screen user interface to its unique, multi-format block, this cycler is loaded with features. The program wizard and 10 pre-installed programs make it easier than ever to get up and running.

The fully adjustable heated lid prevents condensation and evaporation of samples. Lid temperature can be programmed, and when the block temperature is below 35°C, the lid automatically shuts off. The heating and cooling of the block are precisely and accurately controlled within exceptionally tight tolerances by a proprietary algorithm that simulates sample temperature.

With the multi-format block, there is no need for the expense of multiple interchangeable blocks. The PR1MA TC9639 has the flexibility to accept 96 × 0.2 mL tubes, a 96-well plate, 0.2 mL strips or 39 x 0.5 mL tubes all in the same sample block. For protocol optimization, a gradient can be set up across the block. An optional in-situ adapter allows for the incubation of slides. Additionally, the unit may be purchased with a 384-well sample block.

Compatible with PR1MA and Accuris PCR reagents. For research use only.

A large, full-color touchscreen serves as the operations center where all functions are accessed. From the “Home” screen, simply touch an icon to view the last run program, enter the program library, or use the program wizard to quickly enter a protocol. In addition, icons for favorite programs can be added for faster access.

The program wizard guides users through quickly setting up a protocol on a single screen. Once entered, programs are shown graphically and can be edited by simply touching the step that requires modification. Time and temperature increments can be built into programs as well as slower ramp rates. Storage capabilities are unlimited; programs can be stored in public folders, private (password-protected) folders, or on a flash drive. The full virtual keyboard allows for alphanumeric naming of programs and folders.

 

Features

  • Gradient capabilities- ideal for protocol optimization
  • Intuitive touchscreen control- Works even when wearing gloves!
  • Upgraded software- Even easier to use than before!
  • No need for interchangeable blocks- multi-format accepts:
    • 0.2 mL tubes or strips (96)
    • 0.5 mL tubes (39)
    • 96-well PCR plate

Item#:
ASPCRTC2

SureAir PCR Workstation

  • HEPA filter and UV light reduce cross-contamination during PC preparation
  • Compact, 22 x 16" footprint
  • Cable port allows easy use of centrifuges, vortexers, and other instruments
  • Includes pipette holder and shelf for storage of pipettes and tips
  • Provides clean air within chamber to ISO 5 standards
The Benchmark SureAir PCR workstation is a compact, convenient way to reduce contamination concerns and provide a clean room environment at a fraction of the space and cost. The high-powered yet quiet internal fan produces laminar flow conditions without any installation into ductwork. The included HEPA filter purifies air within the chamber, meeting IS0 5 cleanliness standards, and filters 99.97% of particles 0.3 um and larger. The double-hinged front panel provides ample workspace for convenient hand access, and can be opened fully to allow placement of equipment inside.

The SureAir is designed to keep your workspace clean easy-to-use, and organized. An included germicidal UVC light eliminates any stray DNA that may contaminate samples, and is programmed to automatically shut off after 15 minutes. To protect users, the UVC light is only operational when the
cover is closed, and will shut off upon opening the cover. Ample lighting is provided by an energy efficient LED light
source. Up to 3 standard size pipettes are accommodated by the pipette holder integrated within the storage shelf. Pipette tips and small instruments can also be stored away from the main workspace when not in use. Power cables can easily be routed through the access port on the right side of the chamber. 

Specifications 
 
UV Light8W UVC
UV Auto-Shutoff Timer15 minutes
MaterialsUV-Resistant Polycarbonate
Outer Dimensions (W x D xH)21.7x15.7x23.3in.
Inner Dimensions (WxDxH)197x154×15.7in.
Hand Access Dimensions (W xH)197×6.3 in.
Filter0.3 um 99.97% HEPA
Air Velocity0.2 m/s
Electrical115V or 230V. 50/60 Hz
Power ConsumptionTOW
Weight44 lbs
Warranty2 years
 
 
Item#:
ASSUREAIRPCRS

PR1MA Touch Power Supply

  • Touch screen control
  • Bright color display
  • Dual orientation, auto-rotating display

The PR1MA Touch is a workhorse electrophoresis power supply, ideal for the efficient separation of nucleic acids and proteins as well as basic western blotting applications. Four pairs of output jacks are wired in parallel for connecting multiple electrophoresis tanks. A color touch screen allows quick setting and monitoring of all run conditions, including run time, voltage, and current. Users can select “Constant Current” or “Constant Voltage” during an electrophoresis run, keeping the chosen parameter fixed as resistance changes. The dual orientation design with a rotating display allows the PR1MA Touch to be installed in the most convenient location, on a shelf or bench, saving valuable space.

 

The PR1MA Touch features a logical user interface.

Setting up an electrophoresis run couldn’t be easier; simply touch the parameter to select it, press the “up” and “down” arrows to adjust the value, and then touch “Start”. All parameters are always displayed, with no need to toggle between Time, Voltage, or Amperage. In addition, the run status is always displayed.

 

Specifications


Output SettingsConstant voltage or constant current
Voltage Output10 to 300 V (1 V increments)
Current Output4 to 400mA  (1 mA increments)
Max Wattage100 W
Timer1 min. to 20 hours or continuous
Output Terminals4 pairs (wired in parallel)
SafetyNo load detection, overload detection with power limitying function
Display2 x 2 In. color touchscreen
Dimensions8.5 x 6.3 x 4.0 In.
Weight2 lbs
Electrical*100 V to 230 V, 50-60 Hz (Universal Input)
Warranty2 years

 

Proudly made in the USA! Click here for more made in America products!
 

Item#:
ASPR1MAMYVLTTCH

Mystaire® PCR Prep Stations

Compact laminar flow enclosures that reduce the risk of sample contamination while performing polymerase chain reaction experiments.

Airborne contaminants are prevented from entering into the work zone through constant positive pressure HEPA filtered air. Each PCR prep station is equipped with a built-in 254 nanometer shortwave lamp to effectively decontaminate the work area between amplifications. Safety interlocks are included on all PCR prep stations to prevent operator exposure to potentially harmful UV radiation.

MY-PCR prep stations are bench-top personal clean zones allowing the operator to amplify RNA and DNA while minimizing the potential for background from airborne contaminants.

*Note: MY-PCR and FE-PCR are not biological safety cabinets. They are designed to provide process protection only from potential airborne contaminants found in the laboratory space.

  • Class 100 vertical laminar flow air
  • 15-Minute UV light timer
  • Clear polycarbonate construction with chemically impervious polypropylene work surface
  • UV shelf with integrated pipette holder
  • Electrical cord pass-through port
  • Sash position switch and overlap to prevent UV light exposure
  • HEPA Filters, Pre-Filters, UV bulbs, additional ports and shelves also available

Specifications
 
Item #MY-PCR24MY-PCR32MY-PCR48
Dims (D x W x H)24 x 24 x 30 In.
609.6 x 609.6 x 762 mm 
24 x 32 x 30 In.
609.6 x 812.8 x 762 mm
24 x 48 x 30 In.
609.6 x 1219.2 x 762 mm
Noise Level<45 DBA<49 DBA<56 DBA
Voltage110 V or 220 V
Power200 Watts400 Watts
UV Light15 W/254 mm15 W/254 mm (2)
BlowerSparkless Brushless
UV Light Timer0 to 15 min.
Safety InterlockYes
Air Velocity60 LFM

Mystaire® PCR Prep Stations are proudly made in the USA! Click here for more made in America products!

Item#:
ACRPCRHOOD4

LabValues 2025 Promo!

For a limited time, enjoy special pricing on select
MultiGene™ OptiMax Gradient Thermal Cyclers! 
(TC9610)

 

See flyer for more details.

  

Offer cannot be combined with other discounts or institutional pricing.
Offer not valid on previous purchases.
Promo valid from 7/15/25 to 12/31/25 or while supplies last.

All terms and conditions apply.


MultiGene OptiMax Thermal Cycler  


This simple-to-program PCR thermal cycler unit is compact in design and built to perform. Programming is intuitive with the large display and multiple pre-programmed templates supplied with the unit.

 

The OptiMax comes with standard built-in 2-step, temperature optimization, touchdown, and time increment protocols that are easy to adjust to meet your cycling needs. You can select lid temperature or turn it off depending on your needs. The faster ramp rates allow more work to be done in a workday.
 

 

Additional Thermal Cycler Product Features:

  • Unique Flexible Programming with FlexTemp technology
  • Fast ramp rates 5°C heating / 3.5°C cooling
  • Simple user interface
  • No condensation after overnight cooling at 4°C
  • 3-Year Warranty 

Distinct Heat Optimization

The MultiGene OptiMax employs a new protocol optimization process improving on older gradient features. This “Better than Gradient” capability allows users to select up to 6 distinct annealing temperatures to be run simultaneously. This is ideal for method optimization as well as applications like genotyping.

 

The OptiMax utilizes FlexTemp technology that effectively separates the 96-well plate into 6 – (4 x 4) temperature regions that allow you to pick the temperatures you want to test against. These regions are easily identified by the blue and black squares visible on the microplate platen. Instead of having the thermal cycler choose temperatures for you, you can choose any temperatures you want within a 24°C range.

 

The MultiGene OptiMax has a heating rate of 5°C /sec and a cooling rate of 3.5°C/sec. We have minimized overshooting and undershooting so that your reactions only see the temperatures they are supposed to see. This also leads to faster runs time.

 

Intuitive User Interface

The MultiGene OptiMax utilizes an intuitive user interface. This user interface is friendly to the laboratory environment and consistent with what our customers previously enjoyed in our earlier models. It can be used with lab gloves even if wet. We have improved the ramping speed and eliminated overshooting and undershooting which contributes to longer run times.

 

Fully Adjustable Heated Lid

The OptiMax’s heated lid is fully adjustable to provide optimum pressure for use with a broad range of tubes and microplates. For optimum performance, the lid can also be programmed to hold different temperatures between 60° to 65°C and 100° to 115°C. The OptiMax lid prevents condensation and slides away and back from the user to provide full access to samples and reduce the risk of coming in contact with a hot surface.

Specifications 

Sample Capacity1 x 96 well plate, 12 8 x 0.2 mL strip tubes,
96 x 0.2 mL tubes
Programmable Temperature Range4°C to 99.9°C
Temperature ControlCalculated or block
Temperature Accuracy/Uniformity±0.5°C/±0.5°C
Heating/cooling methodPeltier
Max. heating/cooling rate4°C/3°C per second
Temperature range of 6-segment blocks30°C to 99°C Temperature of 6-segment blocks
can be set independently.
Maximum Temperature difference between 6-segment blocks24°C
6-segement temperature blocks6 temperature blocks in 4 x 4 well format
Programmable lid temperature60° to 65°C, 100° to 115°C
Program memory200 complete programs
Temp. increments/decrementsYes
User program folders50 sets
Password protected programsYes
CommunicationUSB and RS232 ports
Dimensions (W x D x H)9.4 x 16.5 x 9.8 inches
Weight19.8 lbs
Electrical120 V (TC9610) or
240 V (TC9610-230), 50/60 Hz


 

 

Item#:
ASPCRTC8

PR1MA SmartGlow DNA Safe Stain

  • Replaces hazardous Ethidium Bromide (EtBr)
  • Better sensitivity than EtBr
  • Detect as little as 0.1ng of DNA
  • Two types available
  • PS Pre Stain
  • LD Loading Dye
  • Excitation by UV light or blue light
  • Compatible with Accuris SmartBlue Transilluminator
  • Ships at ambient temperature (stored at 4°C)

PR1MA SmartStain PS (Pre-Stain) can be used as a direct replacement for Ethidium Bromide in agarose and polyacrylamide gel electrophoresis. The stain emits green fluorescence when bound to dsDNA or ssDNA and emits red fluorescence when bound to RNA. PR1MA SmartStain PS exhibits excitation peaks at 290 nm and 490 nm, allowing it to be used with UV and blue light.

Protocol:

  • Prepare 100 mL of agarose or polyacrylamide solution.
  • Add 5 uL of PR1MA SmartStain to the gel solution before pouring gels.
  • For enhanced results, add PR1MA SmartStain PS to the running buffer at a ratio of 5 uL per 100 mL. Adding PR1MA SmartStain PS to the running buffer will result in increased sensitivity and better detection of small quantities of nucleic acid.
  • After electrophoresis is complete, view the gel using a UV or blue light illuminator

Proudly made in the USA! Click here for more made in America products!
 


OptiWell Tip Combs - KingFisher Compatible

 

Precision-Made for Magnetic Particle Processing.

 

OptiWell Tip Combs are engineered for seamless compatibility with KingFisher Flex instruments (not affiliated or endorsed) and other leading automated liquid handling systems. Designed for optimal performance in magnetic particle-based protocols, these tip combs are ideal for DNA and RNA extraction, viral RNA isolation, immunoprecipitations, and nucleic acid quantification.

 

Manufactured from low-binding, medical-grade polypropylene, OptiWell Tip Combs minimize sample loss while ensuring maximum purity. Each batch is rigorously tested and certified RNase and DNase free, making them ideal for sensitive molecular biology workflows. Available in sterile or non-sterile options to suit your lab's specific needs.

 

Key Features

  • Compatible with KingFisher Flex and similar automation platforms (not affiliated)
  • Made from low-binding, medical-grade polypropylene to reduce sample loss
  • Available in sterile and non-sterile formats
  • Certified RNase and DNase free
  • Ideal for DNA/RNA extraction, viral RNA workflows, and immunoprecipitation protocols
  • Designed for reliable magnetic bead separation and high-throughput workflows 

Whether you're working with nucleic acids or performing protein purification, OptiWell Tip Combs deliver consistent performance and contamination-free results in automated systems.
 
  

Click here to see our KingFisher Compatible OptiWell Deep Well Plates.
  
 

Disclaimer

KingFisher™ is a trademark of Thermo Fisher Scientific. OptiWell™ Tip Combs are third-party products designed for use with KingFisher™ instruments. Thermo Fisher Scientific does not manufacture, sponsor, or endorse OptiWell™ products, and is not affiliated with these offerings in any way. 

 
  
 

Item#:
ASOPTIWELLCOMB
Limited Time Promo!


Limited-Time Offer: Special Pricing on Azure Cielo 6 qPCR!

Get the Azure Cielo 6 (AIQ060) at an exclusive promotional price of $16,895!

 

Package Includes: Azure Cielo 6 qPCR System, Comprehensive analysis software and 18-month warranty.

 

Promo is valid until 12/31/25 or while supplies last. Offer cannot be combined with other discounts or institutional pricing. Terms and conditions apply.
 

See the flyer for full details 

 


Azure Cielo qPCR Systems

The Azure Cielo Real-Time PCR system provide accuracy and sensitivity needed for research, with intuitive touch screen software.

  • Flexibility:  Engineered for a wide variety of qPCR applications, with high sensitivity and wide dynamic range.
  • Intelligent workflow: The user interface is a simple touch screen assay setup.  Protocols can be saved to make assay set up easy and reproducible.
  • Reliability: Cielo's optics and thermal block are designed to deliver the same uniformity and reproducibility over at least 1,000 qPCR experiments, giving you confidence in the reliability of the instrument.
  • Connectivity: An external PC is not required to run the instrument.
  • Data Transfer: This can be performed via Ethernet, Wi-Fi or USB.

Operation - A standalone qPCR system with 10.3” touchscreen interface
Optics - 3 or 6 dye channel filters with LED based excitation for multiplexing
Speed - Fiber optic detection system scans 16 wells simultaneously
Durability - Tested reliability for over 1000 continuous runs
Connectivity - Easily export data via Wi-Fi, ethernet, USB or LAN
Capacity - 96-well format for semi-skirted or un-skirted plates and tubes
Thermal Performance - Marlow Peltier based block with 12 temperature gradient zones, ramp rates up to 6.0°C/sec
Chemistry - Supports reaction volumes between 10 µl–150 µl, open source chemistry, including FAST ~20 minute run-times
Sensitivity - Detect 2-fold differences in target quantities in singleplex reactions and up to 1 copy of amplified DNA, 10 logs of dynamic range


Competitor Q uses a single light source to excite all samples.

Differences in light path length lead to differences in excitation, which requires normalization. Though Competitor Q has said that they do not require normalization dyes, this is not reflected in the data as the data CV values for replicates is significantly higher.

 

Why doesn’t the Cielo require ROX dye?

 The Cielo does not require ROX dye because it uses in-well detection technology. The light path for excitation and reading emission are collimated directly into the well. As such, the light path length is always the same for each well, so there is no need to normalize for varying light path length. The data from the Cielo is consistently uniform and reproducible.

Specifications

Dyes/ProbesAzure Cielo 3 AIQ030Azure Cielo 6 AIQ060
SYBR™ Green, EvaGreen, FAMxx
VIC®, HEX, JOE, CAL Fluor® 540, CAL Fluor® Orange 560xx
TAMRA x
ROX, TEX®615, CAL Fluor® Red 610 x
Cy®5, Quasar®670, Liz®, Mustang Purple®xx
Cy®5.5 x

*Other dyes/probes are possible depending on the system configuration.

Proudly made in the USA! Click here for more made in America products!
 

|◀ 1 - 12 of 291 ▶|
View: