Accuris Precision Balance Series

*All balances include glass draft shields except for W3300-1200, 3200 and 5K

Readability: 0.01 to 0.001 g

Accuris Precision balances quickly and accurately display sample measurements on a large, backlit LCD screen. Utilizing highly precise, gold plated ceramic capacitance sensors, these balances tare and stabilize quickly and provide reliable weight measurements within 0.001 grams.

• Readability to 0.001 g
• Easy in-lab calibration feature
• RS232 port for data output to a computer or printer
• Multiple mode options (standard weighing, count mode, & percent)

Accuris Precision balances quickly and accurately display sample measurements on a large, backlit LCD screen. Utilizing highly precise, gold plated ceramic capacitance sensors, these balances tare and stabilize quickly and provide reliable weight measurements within 0.001 grams.

Six models are available in the Precision Balance range, covering a wide range of maximum capacity requirements. The smaller capacity models (120 g, 320 g, and 500 g) include a glass draft shield with 3 sliding doors for easy access the weighing chamber. These models offer readability to 0.001 g (1 mg). The larger capacity models (1,200 g, 3,200 g, and 5,000 g) feature a more traditional top-loading design, come with larger weigh pans and have readability to 0.01 g.

All models feature a control panel with a large, bright back-lit LCD screen that is easy to use and easy to see. The advanced software includes weighing modes for standard weighing, piece counting, percent deviation and also check weighing for component inspection.

All Accuris Precision balances can be quickly calibrated in the lab with a few key strokes on the control panel and the use of a calibration weight. Leveling feet on the front are easy to access, and a leveling bubble integrated into the control panel aids in the leveling process.
 
Specifications 

, Scale

 
Benchmark™ MyBath™ Water Bath Series

The MyBath™ series is designed to guarantee superior accuracy and performance in a compact footprint. With four sizes to choose from, there is a MyBath™ to fit every lab.

Easy-to-use controls allow the user to digitally select and monitor settings. Adjustable in 0.1°C increments, the temperature is shown on a large, 3-digit display. The proprietary Quick-CAL™ feature allows for simple, in-lab calibration. High-efficiency insulation maintains temperature stability and uniformity within the bath while keeping the housing cool to the touch.

All the MyBath™ models feature seamless, stainless-steel chambers for easy cleaning and long life. The chambers resist rust and have no corners to collect dirt or contamination. The larger 8 L and 12 L units have drains for hassle-free water changes.

The 4 L, 8 L, and 12 L models include a see-through cover that can be removed or flipped back on a rear hinge to conserve bench space. The lid's gabled design will divert condensation to the front and back of the bath, away from samples.

Racks are available to accommodate 1.5 / 2.0 mL (B2000-4-T1520); 15 mL (B2000-8-T150); and 50 mL (B2000-8-T500) in the 8 L and 12 L MyBath™.

The capacity for the 8 L and 12 L MyBath™ is as follows: 2 B2000-4-T1520, 1 B2000-8-T500, 1 B2000-8-T150.

Specifications

	2 Liter	4 Liter	8 Liter	12 Liter
Item Number	B2000-2	MB2000-4	B2000-8	B2000-12
Temperature Range	Ambient + 5 to 100°C
Temp. Accuracy	±0.2°C at 37°C		±0.5°C at 37°C
Temp. Increments	0.1°C
Temp. Uniformity	±0.2°C at 37°C
Exterior (WxDxH)	6.5 x 8 x 6 in.	7.7 x 13.9 x 9 in.	17.5 x 10.5 x 12.4 in.	18 x 10.5 x 16.2 in.
Chamber (WxDxH)	5.5 x 6 x 4 in.	5.3 x 9.4 x 5.5 in.	12.8 x 10.4 x 5.9 in.	12.8 x 10.4 x 7.9 in.
Weight	4.5	15	17	17
Electrical	115 or 230 V, 50-60 Hz

  

Item # B2000-2 is proudly made in the USA! Click here for more made in America products!

Hermle Z216-MK Bundle with 44-Place 1.5/2.0 mL Rotor!
Bundle Includes: One Z216 MK refrigerated centrifuge, 115V and one 44 x 1.5/2.0 mL rotor. 

 
Hermle Z216-MK Bundle with COMBI-Rotor 24 x 1.5/2.0 mL and 4 x PCR strips! 
Bundle Includes: One Z216 MK refrigerated centrifuge, 115V and one COMBI-Rotor 24 x 1.5/2.0 mL and 4 x PCR strips. 
  

Free offer with purchase of designated items at listed price. Cannot be combined with other discounts or pricing.

Not valid on prior purchases. Special price applies only to the specified item; no substitutions.
Promo valid from 01/01 – 06/30/25. All terms and conditions apply.

See flyer for more details

Z216-MK High-Speed Refrigerated Microcentrifuge

• 9 rotor options with capacity of up to 44 x 1.5/2.0 mL
• High speed, 15,000 rpm/21,631 x g
• Powerful refrigeration, room temp. to 4°C in <10 min
• Accepts tubes from 0.2 mL to 5 mL
• 5 Year Warranty

Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory.

All common microtubes (0.2 mL, 0.5 mL, 1.5 mL, 2.0 mL) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0 mL centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy-to-use front panel can adjust accel/decel rates and change the end-of-run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5 mL dual-row rotor, nearly doubling the capacity when compared to traditional microcentrifuges.

In the Z216-MK model a powerful, compressor-driven cooling system maintains temperatures as low as -20°C and is designed to reach 4°C (from room temperature) in less than 10 minutes.

Specifications

Speed Range	200 to 15,000 rpm
Max. RCF	21,379 x g
Max. Capacity	44 x 1.5/2.0 mL
Temp. Range	-20°C to 40°C
Dimensions	11 x 21.6 x 11.4 in.
	27.9 x 54.9 x 29 cm.
Weight	77lbs (35kg)
Electrical	120V, 60Hz

Accessories & Parts

Item #	Description
Z216-2420S	COMBI-rotor™ w/ Quick-Seal™ Lid for 24 x 1.5/2.0 mL and 4 x PCR Strips (15,000 rpm/ 21,631 xg)
Z216-2420	Rotor, 24 x 1.5/2.0 mL w/ Quick-Seal™ Lid (15,000 rpm/ 21,379 xg)
Z216-2420H	Rotor, 24 x 1.5/2.0 mL w/ Hermetically Sealed Aluminum Lid (15,000 rpm/ 21,379 xg)
Z216-3020H	Rotor, 30 x 1.5/2.0 mL w/ Quick-Seal™ Lid (13,500 rpm/ 19,151 xg)
Z216-4420	Rotor, 44 x 1.5/2.0 mL w Quick-Seal™ Lid (15,000 rpm/ 21,379 xg)
Z216-24SC	Rotor, 24 x 1.8 mL Spin Column Kits w/ Quick-Seal™ Lid (13,500 rpm/ 17,317 xg)
Z216-3202	Rotor, 4 x PCR Strips (32 x 0.2 mL Tubes) (15,000 rpm/ 15,343 xg)
Z216-1205	Rotor, 12 x 5 mL Centrifuge Tubes (14,500 rpm/ 19,978 xg)
Z216-24HEM	Rotor, Hematocrit, 24 x Capillary (12,000 rpm/ 14,970 xg)

 
 

RWD Single Cell Suspension Dissociators

Designed to help you quickly and gently dissociate fresh tissue into single-cell suspension with high cell viability or tissue homogenate, greatly increasing experimental repeatability. RWD Single-cell suspension dissociators use tissue processing tubes, tissue dissociation kits, and built-in optimization programs for preparing high-activity single-cell suspension and tissue homogenate. The preparation of single-cell suspension with high cell viability can be completed within 15-30 minutes, which makes the experiments more reproducible.

2 (DSC-200), 4 (DSC-410), or 8 (DSC-810) independent operating channels and heating jackets can automate the processes and improve the efficiency of tissue processing. Dissociators with heaters will save you from time-consuming water baths and improve efficiency. Moreover, all parameters can be adjusted in user-customized programs to process more tissue types.

Applications include compound toxicity evaluation, drug development process, single-cell sequencing, primary cell culture, fluorescence-activated cell sorting, cell therapy, flow cytometry.

Dissociate Tissues: human tumor, brain tumor, mouse or rat neural tissue, frozen tissue, spleen, lung, lamina propria, lymph gland, testicles or liver mouse adipose tissue, mouse epidermis, etc.

• High quality: High viability and yield. Gentle dissociation protects cell surface epitopes.
• High efficiency: Completes within 15-30 minutes. Multi-channels operate independently and quickly.
• Standardization: Variety of default dissociation procedures that match with specialized accessories, reagents, and consumables.
• Multi-applications: Meets a variety of downstream experiments. Multiple enzymatic digestion kits cover most tissues.
• Easy Operation: User-friendly software with touch screen, one-touch to run preset processing programs or edit custom programs.
• Independent working channels: Each channel can run different programs simultaneously. DSC-410 and DSC-810 can also be equipped with heating jackets to achieve automatic sample preparation.
• Wide range of applications: Stable motor speed ranges from 0 to 4000 rpm, capable of single-cell suspension and tissue homogenate.
• Flexible collocation of consumables and reagents: Customized tissue dissociation kits and tissue processing tubes can ensure cell viability and reduce experimental losses.   

Specifications
 

Sample Vol.	20-4000 mg
Buffer Vol.	0.3-10 mL
Speed	0-4000 rpm
Temp.	37ºC | 98.6ºF

Item #	Channels	Operation Method	Dimensions (W x D x H)	Weight lb | kg
DSC-200	2	7 In., Touch Screen	8.46 x 14.96 x 7.48 In. 215 x 380 x 190 mm	~ 19.84 | 9.0
DSC-410	4	Touch Screen		~ 22.71 | 10.3
DSC-810	8	Touch Screen	16.34 x 15 x 10.08 In. 415 x 381 x 256 mm	39.68 | 18

 

• Precision Control of Aspiration Needle Position
• Accurate to 0.1 mm
• Minimal residual liquid
• Auto rinse function eliminates cross contamination
• Up to 100 wash protocols can be customized and stored
• Liquid level sensors in wash and waste bottles
• Wash protocols can be transferred via flash drive

The SmartWasher™ 96 provides flexibility by accepting full plates, partial plates, and strips with U, V, C, or flat bottoms. Multiple aspiration point settings allow for minimal residual liquid in the wells after aspiration. All parameters, including dis­pense volume, suction time, soak and shake cycles, and shaking speed are easily programmed using the large 4.3" LCD display and keypad. Up to 100 wash protocols can be stored on board the SmartWasher™ 96 and recalled when needed or transferred between machines with a flash drive.

The washer comes with 2 wash bottles, 1 rinse bottle and a waste bottle. All have sensors that alert the user when the solutions are low, or in the case of the waste bottle, when it needs to be emptied. An auto-rinse function primes the dispensing tube and wash heads to prevent cross contamination and clogs.

8- and 12-channel wash heads are available separately to accommodate plates in either orientation. A transparent, acrylic shield surrounds the wash area, allowing for visualization of the plate. Should a spill or leak occur, the beveled spill well ensures that the liquid is extracted immediately to avoid cross-contamination.

The SmartWasher™ 96 is the perfect partner for the SmartReader™ 96 Microplate Absorbance Reader as well as other popular readers.

Specifications

Celloger Mini

The Celloger Mini is designed for brightfield live cell imaging system inside a CO2 Incubator.  The advanced features allow for imaging at multiple locations in a plate, dish or flask at desired time points.  Auto-focusing function allows researchers the ability to observe cell morphology in real time and for review.  Time-lapse imaging capability for the capturing of serial images of cellular dynamics over longer periods.  It is now possible to observe every well in a 96 well plate multiple times while you relax after work and review the images and results when you return to the lab.

Benefits

• Compact design easily fits into standard CO2 incubators
• Position memory allows multiple area to be set for automatic observation, up to including 96 well plates
• Time-lapse image capturing & video clip
• Software is easy to use
• Provides thermo-hygrometer data in real time
• Allows for imaging of standard plates, dishes and flask.

Applications:

• Measuring cell confluency
• Scratch (wound healing) assay
• Monitoring cell growth curve

myBath™ CR Circulating Water Baths

• Constant water circulation,
• ensures even temperature distribution
• Digital PID processing for precise temperature control
• Stainless steel chamber and coil
• Ambient +5° to 100°C
• Stainless steel Chamber and Circulating Coil
• Optional gabled cover and stainless steel test tube racks 

Benchmark™ myBath™ CR circulating water baths offer the same accuracy and convenience of the static myBath™ series, but with faster heat ramping and enhanced stability/uniformity. With constant circulation, water temperature is uniform throughout the chamber, eliminating “cold-spots” and allowing for quick recovery following insertion of frozen samples.

The myBath™ CR utilizes digital PID processing control that accurately maintains and adjusts the temperature to the set parameters. Once the desired temperature has been programmed, the instrument begins to heat, while indicating both the set and actual temperatures on the large, digital display.

The chamber and heating coil are constructed of stainless steel, resulting in easy cleaning. Optional accessories are available for securing test-tubes and an optional gabled lid can be purchased to improve efficiency.

Specifications
 

Item #	B2023-GL10	B2023-GL20
Temp. Range	Ambient +5° to 100°C
Temp. Stability	+/- 0.2°C
Temp. Uniformity	+/- 0.1°C
Exterior Dims (D x W x H)	13.2 x 10.8 x 11.9 In. 33.5 x 27.5 x 30.3 cm	13.4 x 21.2 x 11.9 In. 34 x 54 x 30.3 cm
Interior Dims (D x W x H)	11.8 x 9.4 x 6 In. 30 x 24 x 15 cm	11.4 x 19.2 x 6 In. 29 x 49 x 15 cm
Weight	19.8 lbs | 9 kg	25.3 lbs | 11.5 kg
Electrical	115V or 230V 50-60Hz
Power Consumption	1200W
Warranty	2 Years

 

• Large white ceramic top plate
• Digital speed and temperature control
• Safety LED indicates hot surface
• Available with stir capacities up to 15 L
• Control actual temperature (with optional probe)

Benchmark Scientific Hotplates and Stirrers provide reliable performance and safe operation for everyday laboratory use.  With two sizes (7 inch or 10 inch) to choose from, each model features a durable, chemical resistant, white ceramic top plate and advanced microprocessor controls.  The constant monitoring system provides precise control of temperature (heating models only) with rapid heating and faster boiling times.  In addition, the powerful motor drive system of the magnetic stirrer ensures efficient mixing in larger vessels and more viscous samples.
 
Temperature and/or mixing speed can be viewed at all times on the large digital display and safety LED illuminates when the top plate temperature exceeds 50°C.  An optional external temperature probe can be used for applications that require precise temperature control.  The probe provides direct feedback to the microprocessor with adjustments for maintaining the selected sample temperature within ±1°C.  An optional clamp assembly (H3770-CS) is available for mounting thermometers, temperature probes, etc. 

Notice for U.S. Customers – RWD Consumables
Due to changes in U.S.–China tariffs, we will pause sales of select items after Tuesday, April 22, until further notice.
This is in anticipation of the expected De Minimis rule change on May 2.

For more information or alternative product recommendations, please contact us.

RWD Automated Cell Counters

C100/C100-SE Automated Cell Counter

Two models to meet different customers’ needs in BF&FL cell counting and analysis in 9s. Combined with highly intelligent software and excellent microscopy optics structure, the counters could liberate researchers from the heavy work of daily cell counting.

The automated cell counter can identify both live and dead cells. Information such as cell counts, viability and diameter can be obtained with just one click. With fluorescence cube, C100 can display images in BF and FL channels simultaneously and present cell counts and cell morphology. It is an optimal device to analyze cell viability and transfection efficiency in immunology and vaccine development, cell therapy, tumor research, stem cell, metabolism research, and others.

Application

• Tumor Research: Passage cell line, pre-detection of apoptosis
• Immunological research: PBMCs, lymphocytes
• Cell Biology Research: Primary Cells
• Cell quality control: stem cells, CIK
• Cell expression level detection: fluorescent protein, transfection efficiency detection

C100-Pro Automated Cell Counter

Reliable cell counting device with highly intelligent analysis software and excellent microscopy optics structure.

*In order to meet the needs of cell therapy and biopharma, the data management and software system of C100-Pro fully conforms to FDA 21 CFR Part 11.

RWD C100-Pro Automatic Cell Counter Realizes Analysis With Multiple Application Scenarios

• Cell Count Analysis: Suitable for counting cells or particles with a diameter of 4 – 60 uM, such as most cell lines, stem cells, primary cells, etc.
• Cell Viability Analysis: When testing cell viability in trypan blue mode, after staining, live cells will be
• circled in green, and dead cells will be circled in red.
• Cell Size Analysis: In cell research, cell size is a key feature, which is often measured in cell transfection, drug testing, and cell viability.
• After counting, it will count the average diameter of the cells in the sample and automatically generate a histogram.
• Cell Fluorescence Analysis: Cell Viability Identification (AO/PI Dual Fluorescence Method).
• In addition to trypan blue staining, AO/PI dual fluorescence staining has become popular as a more accurate live cell counting method and is widely used for primary cell counting.

Specifications
 

Item #	C100-SE	C100	C100-PRO
Optional fluorescence application	N/A	Ex: 375 / 28 nM | Em: 460 / 50 nM Ex: 480 / 30 nM | Em: 535 / 40 nM Ex: 540 / 25 nM | Em: 620 / 60 nM
Amplification Factor	2.5 x, 5.0 Megapixel
Focus Method	Manual focusing & Autofocusing
Counting Area	0.085 x 0.064 In. | 2.15 x 1.62 mm
Cell Type	Cell lines, stem cells, primary cells, pollens, beer yeast
Cell Size Range	4 - 60 uM (Optimal: 7 - 60 uM)
Cell Concentration Range	10^4-10^7 cells / mL
Cell counting Time	Less than 9s
Historical Data Storage	1000 counting reports and images at most
Languages	Chinese and English
Dims (D x W x H)	6.50 x 8.35 x 10.39 In. | 165 x 212 x 264 mm
Weight	~ 6.61 lb | 3.0 kg	~ 7.05 lb | 3.2 kg	~ 7.72 lb | 3.5 kg

 

MIDSCI™ Diamond Weigh Boats

Weigh Boats are made of antistatic polystyrene and will withstand temperatures to 90C, as well as exposure to diluted acids, alcohols, bases, and aqueous solutions. Their flexibility and smooth interior surfaces with rounded corners allow for easy decanting of powdered samples. Their flat bottoms ensure stability and prevent tipping.

Weigh Boats are available in a diamond shape for easier pouring. Originally designed as weighing containers, they have proven ideal for dispensing & storage and as disposable mixing/quick freezing trays. They are available in black or white for improved sample contrast and visibility and are packaged in ultra-compact dispenser packs.
 

• Antistatic and biologically inert
• Smooth surface/rounded corners
• Recessed corners; precise pouring
• Wide, flat bottoms – resist tipping
• For liquids, powders or granular samples
• White or black for visual contrast