|◀ 13 - 24 of 48 ▶|
View:

Mystaire® PCR Prep Stations

Compact laminar flow enclosures that reduce the risk of sample contamination while performing polymerase chain reaction experiments.

Airborne contaminants are prevented from entering into the work zone through constant positive pressure HEPA filtered air. Each PCR prep station is equipped with a built-in 254 nanometer shortwave lamp to effectively decontaminate the work area between amplifications. Safety interlocks are included on all PCR prep stations to prevent operator exposure to potentially harmful UV radiation.

MY-PCR prep stations are bench-top personal clean zones allowing the operator to amplify RNA and DNA while minimizing the potential for background from airborne contaminants.

*Note: MY-PCR and FE-PCR are not biological safety cabinets. They are designed to provide process protection only from potential airborne contaminants found in the laboratory space.

  • Class 100 vertical laminar flow air
  • 15-Minute UV light timer
  • Clear polycarbonate construction with chemically impervious polypropylene work surface
  • UV shelf with integrated pipette holder
  • Electrical cord pass-through port
  • Sash position switch and overlap to prevent UV light exposure
  • HEPA Filters, Pre-Filters, UV bulbs, additional ports and shelves also available

Specifications
 
Item #MY-PCR24MY-PCR32MY-PCR48
Dims (D x W x H)24 x 24 x 30 In.
609.6 x 609.6 x 762 mm 
24 x 32 x 30 In.
609.6 x 812.8 x 762 mm
24 x 48 x 30 In.
609.6 x 1219.2 x 762 mm
Noise Level<45 DBA<49 DBA<56 DBA
Voltage110 V or 220 V
Power200 Watts400 Watts
UV Light15 W/254 mm15 W/254 mm (2)
BlowerSparkless Brushless
UV Light Timer0 to 15 min.
Safety InterlockYes
Air Velocity60 LFM

Mystaire® PCR Prep Stations are proudly made in the USA! Click here for more made in America products!

Item#:
ACRPCRHOOD4

So-Low Upright Freezers

Efficiency and Dependability for the Most Demanding Environments!

Laboratory professionals all over the world are recognizing the dependability and efficiency of So-Low's Ultra Low Freezers, the first to combine all of these performance features and deliver a level of quality construction, reliability and value unequaled anywhere in the world.

  • Compressor life is extended by an energy-saving low stage (operates only on demand).
  • Compressors are protected with a constant flow of refrigerant.
  • Heat is efficiently and effectively dissipated by an air-cooled condenser with three fans.
  • Monitoring light to warn of clogged condenser.
  • Freezer has an automatic timer system that will restart the unit in case of power failure.
  • Large air-cooled condenser with front to back air flow resulting in cooler compressors.
  • Special hinged grill for easy opening provides for a quick visual check of the condenser.
  • CFC-Free DuPont Suva 95 Refrigerant.

Available Accessories

  • Chart Recorders, 7 Day - 6"
  • Inventory Control Systems
  • Porthole Access
  • CO2 and LN2 Back-Up Systems
  • Stainless Steel Chambers
  • Baskets - Rails
  • Three-Phase Electrical Wiring
  • Power Booster - Low Voltage Safety System
  • Telephone Alarm System

Freezers are also available for -20, -30, -40 and -96°C.

Specifications

Temp. Range-40°C to -85°C
Control SystemLarge Digital Temperature Control
Refrigeration
System
Cascade Type - Two Compressors
Hermetic Type - Condenser - Air-Cooled - Cooling Coils -Copper Tubing
InsulationCFC Free - Minimum 5" High Density
Polyurethane - Minimum 3/4 In.
Sublids Gaskets - Double-Sealed
ConstructionInner Chamber - Heavy Gauge Corrosion
Resistant Zinc Coated Galvanized Steel
Outer Shell - Heavy Gauge, Cold-Rolled Steel
Electrical
Requirements
115 volts, 60 hertz, 1 phase | 208 volts, 60 hertz, 1 phase
230 volts, 60 hertz, 1 phase | 220 volts, 50 hertz, 1 phase
Digital
Alarm
System
Rechargeable lifetime battery powered alarm system has a digital display.
An audio and visual alarm will come on when there is a rise in the temperature set point.
The system has an audio silence button, alarm test switch, and relay for remote alarm.
Warranty1 year parts and labor 

*MIDSCI is not responsible for lost product or damages incurred to product in the case of freezer or refrigerator malfunction.

**V80-30 is only -80

Dimensions 

Item #Interior Dims (W x F-B x H)Exterior Dims (W x F-B x H)
V85-1320 x 22 x 51-1/4 In.35 x 33 x 79 In.
V85-1823 x 26 x 51-1/4 In.36 x 35-1/2 x 79 In.
V85-2228-1/2 x 26 x 51-1/4 In.41-1/2 x 35-1/2 x 79 In.
V85-2534 x 25 x 51-1/4 In.49 x 35-1/2 x 79 In.
V80-3042 x 25 x 49 In.62 x 35-1/2 x 79 In.

Proudly made in the USA! Click here for more made in America products!
 

Item#:
ASFRXUPSOLO


VistaLab ali-Q 2 Pipet Controllers

 

Repeat Pipetting Plus Conventional Pipetting with a Single 2-in-1 Controller!

  • Faster and Easier Aliquoting. No Need to Watch the Lines. More Accurate and Reproducible Than by Eye.
  • Highly reproducible accuracy with the press of one button
  • Use any size and any brand of serological pipets
  • Plus aspirate and dispense as you’re used to
  • Ideal for cell culture, dispensing media, filling plates, tubes, cryovials, etc.

Features Of The ali-Q™ 2 Series

  • Speed dial for adjustable aliquoting speed (VS model only)
  • On-board calibration software
  • Removable kickstand
  • Lighter weight
  • Sensitive touch-control aspirate and dispense buttons
  • Aliquot button
  • Aliquot volume dial
  • 2 multifunction LED indicators
  • Multiple alert tones
  • Rechargeable lithium ion battery

Specifications

ali-Q™ 2
(High aliquoting speed)
ali-Q™ 2 LS
(Low aliquoting speed)
ali-Q™ 2 VS
(Variable aliquoting speed)
ali-Q™ 2 VS
(Variable aliquoting speed)
Item #2100-00052100-00032100-10052100-1010
Aliquoting Volume Range0.5 - 5.0 mL0.3 - 3.0 mL0.5 - 5.0 mL1 - 10 mL
Aliquot Speed Control (Dial)NoNoYesYes
Aliquoting Speed/ForceHigh (fixed)Low (fixed)Custom adjustable (7 speeds)Custom adjustable (7 speeds)
On-board CalibrationYesYesYesYes
Removable KickstandYesYesYesYes
BatteryRechargeable Lithium IonRechargeable Lithium IonRechargeable Lithium IonRechargeable Lithium Ion

  

Proudly made in the USA! Click here for more made in America products!

Item#:
ASALIQPIPETTE


Drummond Pipet-Aid® XP2


The most comfortable instrument in the laboratory, the Pipet-Aid® XP2 Controller combines industry-leading technology with unparalleled ergonomic design. Created for extended operation, the Portable Pipet-Aid
® XP2 can be charged while in use, and the robust power source provides the power and accuracy needed for your most trusted equipment.

 

Three-speed settings provide ideal flow management during liquid transfer, and our Ultra Quiet Precision Pump gives you unprecedented control for aspiration or dispensing. The unit has a power supply/charger, four extra filters, and a removable stand.   
 
 
 Specifications

 

ItemPipet-Aid® XP2
Size5.5 in.
Weight7.2 oz.
CapacityAccepts 1 to 100 mL pipets
Battery3/VH 700AAA (3.6V/750 mAh)
Speed3 Speed Buttons (S)low, (M)edium and (F)ast


Proudly made in the USA! Click here for more made in America products!
 

Item#:
ASDRUM1


Drummond Pipet-Aid® XL


The Pipet-Aid
® XL Pipette Controller adds comfort without giving up control when under a hood. Repetitive lifting and angling the arm can be exhausting. Arm motion is reduced, and extended pipet use is made easier with the ergonomically designed, longer handle and adjustable sliding hand rest. Enjoy the accuracy, performance, and convenience of our industry-leading Pipet-Aids in a state-of-the-art tool that alleviates arm fatigue.

 

The Pipet-Aid® XL also features a new, quieter, more powerful pump and comes complete with a power supply/charger, four extra filters, a holster-type wall bracket, and a removable stand.


Pipet-Aid® Hood Mate®


The Pipet-Aid
® Hood Mate® offers a comfortable and portable solution for working under a hood. Its lightweight handle has nine fill/empty speed settings and proportional fingertip controls. The dedicated motor housing frees up space, and the winding vacuum/pressure line enters the handle from the top, ensuring safe pipetting under a hood.


Get the dependability of a permanent laboratory fixture with the added convenience of portability. Upgrade to the Pipet-Aid
® Hood Mate® today!


Proudly made in the USA! Click here for more made in America products!

Item#:
ASDRUM2
Limited Time Promo!


Limited-Time Offer: Special Pricing on Azure Cielo 6 qPCR!

Get the Azure Cielo 6 (AIQ060) at an exclusive promotional price of $16,895!

 

Package Includes: Azure Cielo 6 qPCR System, Comprehensive analysis software and 18-month warranty.

 

Promo is valid until 06/30/25 or while supplies last. Offer cannot be combined with other discounts or institutional pricing. Terms and conditions apply.

See the flyer for full details.

 


Azure Cielo qPCR Systems

The Azure Cielo Real-Time PCR system provide accuracy and sensitivity needed for research, with intuitive touch screen software.

  • Flexibility:  Engineered for a wide variety of qPCR applications, with high sensitivity and wide dynamic range.
  • Intelligent workflow: The user interface is a simple touch screen assay setup.  Protocols can be saved to make assay set up easy and reproducible.
  • Reliability: Cielo's optics and thermal block are designed to deliver the same uniformity and reproducibility over at least 1,000 qPCR experiments, giving you confidence in the reliability of the instrument.
  • Connectivity: An external PC is not required to run the instrument.
  • Data Transfer: This can be performed via Ethernet, Wi-Fi or USB.

Operation - A standalone qPCR system with 10.3” touchscreen interface
Optics - 3 or 6 dye channel filters with LED based excitation for multiplexing
Speed - Fiber optic detection system scans 16 wells simultaneously
Durability - Tested reliability for over 1000 continuous runs
Connectivity - Easily export data via Wi-Fi, ethernet, USB or LAN
Capacity - 96-well format for semi-skirted or un-skirted plates and tubes
Thermal Performance - Marlow Peltier based block with 12 temperature gradient zones, ramp rates up to 6.0°C/sec
Chemistry - Supports reaction volumes between 10 µl–150 µl, open source chemistry, including FAST ~20 minute run-times
Sensitivity - Detect 2-fold differences in target quantities in singleplex reactions and up to 1 copy of amplified DNA, 10 logs of dynamic range


Competitor Q uses a single light source to excite all samples.

Differences in light path length lead to differences in excitation, which requires normalization. Though Competitor Q has said that they do not require normalization dyes, this is not reflected in the data as the data CV values for replicates is significantly higher.

 

Why doesn’t the Cielo require ROX dye?

 The Cielo does not require ROX dye because it uses in-well detection technology. The light path for excitation and reading emission are collimated directly into the well. As such, the light path length is always the same for each well, so there is no need to normalize for varying light path length. The data from the Cielo is consistently uniform and reproducible.

Specifications

Dyes/ProbesAzure Cielo 3 AIQ030Azure Cielo 6 AIQ060
SYBR™ Green, EvaGreen, FAMxx
VIC®, HEX, JOE, CAL Fluor® 540, CAL Fluor® Orange 560xx
TAMRA x
ROX, TEX®615, CAL Fluor® Red 610 x
Cy®5, Quasar®670, Liz®, Mustang Purple®xx
Cy®5.5 x

*Other dyes/probes are possible depending on the system configuration.

Proudly made in the USA! Click here for more made in America products! 

 
Benchmark Roto-Therm Incubated Rotators

  • Rotated mixing with temperature control
  • Includes tube holders for common tube sizes
  • Available with variable speed control and advanced shaking / mixing modes: Mix (Oscillating), Pause, Rock (Plus Model)

The Roto-Therm series of incubated rotating mixers provide a wide range of mixing capabilities. Suitable for an array of laboratory applications including resuspension, protein binding, nucleic acid purification, histochemistry, hybridization, etc. The mixers include interchangeable tube holders for accommodating all common tube sizes from 0.5 mL to 50 mL. The motion can be adjusted from vertical (end over end) mixing, to horizontal (rolling or hybridization style) mixing.  

For applications requiring temperature control, the Roto-Therm series can be digitally programmed to maintain chamber temperatures of ambient 5°C to 60°C and include an “in-lab” calibration function for ensuring accurate temperature control.


The Roto-Therm is also available in a “Plus” configuration, providing the following additional features:

  • Variable speed: 5 to 70 rpm
  • “Mix” function: Rotating in combination w/ oscillations (increased mixing)
  • “Pause” function: Rotating with intermittent “stops” during rotation
  • “Rock” function: Back and forth, gentle rocking motion (see-saw)

The Plus model also offers an additional rocking platform (4.5 x 3 in.), as well as a 96 x 0.2 mL tube/strip/plate holder for mixing PCR vessels in the “Mix” (oscillating) mode.

Specifications
 
ModelH2020RTP2024
TemperatureAmbient 5° to 60°C
Speed24 rpm5 to 70 rpm
Mixing ModesN/AMix, Pause, Rock
Dimensions11.6 x 8.5 x 9 In. | 29.5 x 21.6 x 22.9 cm
Weight9 lbs. | 4 kg.10 lbs. | 4.5 kg.
Electrical115 or 230 V, 50-60 Hz, 0.5 AUniversal Voltage
100 to 240 V, 50-60 Hz, 0.5 A
Warranty 2-Year
 

Item #s H2020 and RTP2024 are proudly made in the USA! Click here for more made in America products!
 
 

Item#:
ASROTOTHERM

 
Benchmark MyBath Water Bath Series

The MyBath series is designed to guarantee superior accuracy and performance in a compact footprint. With four sizes to choose from, there is a MyBath to fit every lab.

Easy-to-use controls allow the user to digitally select and monitor settings. Adjustable in 0.1°C increments, the temperature is shown on a large, 3-digit display. The proprietary Quick-CAL
 feature allows for simple, in-lab calibration. High-efficiency insulation maintains temperature stability and uniformity within the bath while keeping the housing cool to the touch.

All the MyBath models feature seamless, stainless-steel chambers for easy cleaning and long life. The chambers resist rust and have no corners to collect dirt or contamination. The larger 8 L and 12 L units have drains for hassle-free water changes.

The 4 L, 8 L, and 12 L models include a see-through cover that can be removed or flipped back on a rear hinge to conserve bench space. The lid's gabled design will divert condensation to the front and back of the bath, away from samples.

Racks are available to accommodate 1.5 / 2.0 mL (B2000-4-T1520); 15 mL (B2000-8-T150); and 50 mL (B2000-8-T500) in the 8 L and 12 L MyBath
.

The capacity for the 8 L and 12 L MyBath is as follows: 2 B2000-4-T1520, 1 B2000-8-T500, 1 B2000-8-T150.

 

Specifications
2 Liter4 Liter8 Liter12 Liter
Item NumberB2000-2MB2000-4B2000-8B2000-12
Temperature RangeAmbient + 5 to 100°C
Temp. Accuracy±0.2°C at 37°C±0.5°C at 37°C
Temp. Increments0.1°C
Temp. Uniformity±0.2°C at 37°C
Exterior (WxDxH)6.5 x 8 x 6 in.7.7 x 13.9 x 9 in.17.5 x 10.5 x 12.4 in.18 x 10.5 x 16.2 in. 
Chamber (WxDxH)5.5 x 6 x 4 in.5.3 x 9.4 x 5.5 in.12.8 x 10.4 x 5.9 in.12.8 x 10.4 x 7.9 in.
Weight4.5151717
Electrical115 or 230 V, 50-60 Hz
  

Item # B2000-2 is proudly made in the USA! Click here for more made in America products!

Item#:
ASH2OBATHS5


Accuris E3200 UV Transilluminator

Accuris UV Transilluminators feature space-saving designs, to fit perfectly in any busy laboratory. Three models are available, with a range of intensity settings and viewing surface sizes. Choose your model depending on your application and the size or number of gels to analyze. 

The E3200 offers a large viewing surface of 21 x 26 cm to accommodate larger gels or multiple small gels. High powered, 14W UV bulbs provide higher sensitivity, so the smallest bands of stained nucleic acids can be visualized. The E3200 also features a control knob for continuous adjustment of the UV intensity.

 

All Accuris UV Transilluminators incorporate scratch-resistant, UV filter glass. Peak output emission of 302 nm is ideal for excitation of gels stained with Ethidium Bromide, SmartGlow, SYBR Green and other common gel stains.

Acrylic UV blocking covers allow safe viewing of samples, and friction hinges on the front edge allow positioning of the cover at an angle for gel access.      

Specifications
 
ItemE3200 UV Transilluminator
Light Source4 x 14W UV Bulbs
Exterior Dimensions (W x D x H)13.6 x 11.8 x 3.5 In.  | 34.5 x 30 x 9 cm
Electrical24VDC (AC power adapter is included)
Output WavelengthPeak at 302 nm
Viewing Surface8.27 x 10.24 In. | 21 x 26 cm
Weight5.15 lbs. | 2.3 kg.
Warranty2 years

Proudly made in the USA! Click here for more made in America products!
 

Item#:
ASACCUUVTRANUL2


Freedom Rocker BotBlot® 

 

The Freedom Rocker BlotBot® is an automated blot processor. The fully programmable blot processing station automates the tedious incubation and washing steps required to process blots and gels, thus saving time and money through increased productivity. All trays receive the same reagent or wash buffer at the same time, in equal volumes, ensuring consistency.

Simply dispense individual reagents (in volumes as low as 3.5 mL) into appropriate trays and recover them separately. This allows the conservation of primary antibodies. The control panel has a large graphic display and intuitive layout making it easy to program protocols. These protocols can include different rocking speeds and times for each step. 

BlotBot® with a clear window can be employed when using reagents that are not light-sensitive in western blots. BlotBot® with a blackout window is recommended when using fluorescent reagents in western blots to preserve their integrity.

  • Automated delivery and removal of buffers/reagents
  • Dispense and recover different antibodies or reagents in each tray
  • Only 3.5 mL or reagent per blot is needed due to specially designed trays
  • Reagent recovery
  • Easy to use-just plug in
  • Quiet, no air or vacuum connections necessary
  • Drip-proof quick-release connections
  • 2-year warranty

Proudly made in the USA! Click here for more made in America products!
 

Item#:
ASROCKER7

Benchmark BenchWaver 3-D Rocker

  • Adjustable speed & tilt for a wide range of applications
  • Large 13 x 13.5 in. work surface
  • Insta-TILT™ technology for instant adjustment to the tilt angle
  • Dual platform accessory doubles work surface
  • Cold room and incubator safe

The BenchWaver combines the basic rocking motion of traditional platform rockers with the circular motion of orbital shakers. This combination is ideal for generating the optimum 3-dimensional undulating motion commonly preferred for molecular biology applications.

The tilt angle is instantly adjustable from 0 to 10 ° and the mixing speed can be adjusted from 5 to 105 rpm, using the large, user-friendly LCD control panel. Combined control of both parameters (tilt and speed) makes the BenchWaver™ a versatile workhorse that can provide anything from gentle, slow-moving waves to rapid more vigorous motion. Additionally, the time of operation can be selected from 1 minute up to 99 hours for continuous operation.

The large 13.5 X 13 In. platform is supplied complete with a non-slip rubber mat. An optional stacking platform is available for users requiring additional mixing capacity. BenchWaver is a reliable and versatile instrument and can be used in refrigerated or incubated environments, from +2°C to +60 °C.

Optional stacking platform and dimpled rubber mat available.

Specifications

 
Speed5 to 105 rpm
Tilt AngleAdjustable, 0° to 10°
Platform Dimension13.5 X 13 in. (34 X 33 cm)
Dimensions13 X 13.5 X 9.75 in.
(33 X 34.3 X 24.75 cm)
Operating Temp. Range+4°C to +60°C
Load CapacityUp to 20 lbs (9 kg)
Weight12 lbs (5.5 kg)
Electrical100-240V, 50-60 Hz, 50 W
Warranty2 years

Item # R3D-5000 is proudly made in the USA! Click here for more made in America products!
 

Item#:
ASROCKER22


Hoefer® miniVE Vertical Protein Electrophoresis and Blotting System

The SE300 minVE is a sturdy, compact vertical protein electrophoresis unit that also performs electrotransfer (blotting). 

  • Quick, excellent results using minimal buffer
  • Passive cooling produces gels with straight lanes and sharp bands
  • Cast your own or use precast gels from a variety of manufacturers
  • Transfer up to 4 gels in 45 minutes with only 300 mL buffer using optional SE302 Blot Modules 
  • Designed for use with a wide variety of precast gels

Hoefer® miniVE Complete Unit (SE300-10A-10)

  • Lower Buffer Chamber (tank), 1/ea
  • Gel Modules with Gaskets, 2 assemblies
  • Safety Lid with High Voltage Leads, 1/ea
  • Glass Plates, Rectangular, 10 x 10.5 cm, 3/pk
  • Glass Plates, Notched, 10 x 10.5 cm, 3/pk
  • Combs, 10-well, 1.0 mm thick, 2/pk
  • T-Spacers, 1.0 mm thick, 4/pk
  • Well-Locating Decals, 2/pk
  • Wonder Wedge Plate Separation Tool, 1/ea
  • Gel Seal, 1/ea

Hoefer® miniVE Basic Unit (SE300)


The same as above without the combs, spacers, and glass plates. For use with precast gels or order two SE211A combs, two sets of 10.5 cm long spacers, and 10 x 10.5 cm rectangular and notched glass plates separately.

 

Hoefer® miniVE Blot Module (SE302)

  • Blot Module, 1/ea
  • Blotter Paper, 25 sheets/pk
  • Dacron Sponges, 6 mm thick, 4/pk

Specifications
 
Plate Size (W x H)3.94 x 4.13 In or 3.94 x 3.15 In. | 10 x 10.5 cm or 10 x 8 cm
Spacers0.75 mm, 1.0 mm, 1.5 mm
Max. Power1000 V, 500 mA, 50 W
Max. Temp.113ºF | 45°C
Indoor Use39.2 to 104ºF | 4 to 40°C
Humidity Up to 80%
Dims (D x W x H)5.51 x 12.60 x 14.57 In. | 14 x 32 x 37 cm
Weight4.85 In. | 2.20 kg

Proudly made in the USA! Click here for more made in America products!
 

Item#:
ASHOFRSE300MINIVE
|◀ 13 - 24 of 48 ▶|
View: