View:



PR1MA Microplate Microcentrifuge

  • Quickly spins down droplets in PCR plates (less than 20 seconds)
  • Accepts skirted, non-skirted, standard, and most microtiter PCR plates
  • 50% smaller than traditional centrifuges
  • Unique rotor design prevents sample spillage

 

The PR1MA Microplate Microcentrifuge is the first mini-sized centrifuge with a swing-out rotor for microplates. Centrifuging plates before PCR ensures all reactants are in the bottom of the wells for proper concentrations and improved yields.

 

The easily accessible rotor chamber includes two plate carriers that rest at a 75° angle. This allows plates to be inserted confidently without sealing tapes or caps. Upon closing the centrifuge lid, the rotor accelerates and the centrifugal force "swings" the plates into a horizontal position, concentrating any droplets on the plate walls to the well bottoms.



Specifications


Speed2550 rpm / 600 xg
Capacity2 x 2 PCR Plates
2 x microtiter plates
(up to 25 mm)
24 x 0.2 ml PCR strips
Deceleration4 seconds
Dimensions9.2 x 10.2 x 7.75 in.
(23 x 26 x 19.7 cm)
Weight9 lbs. | 4.1 kg.
Electrical115V or 230V; 50-60Hz; 250W
Warranty2 Years



Accessories 

 

PCRCENT-A02 - This tube adapter for the PCRCENT Plate Centrifuge holds 96 0.2 mL tubes or 8 and 12 position PCR strips. It comes 2 per pack.

PCRCENT-DWMP - This optional rotor for the PCRCENT Plate Centrifuge has carriers for deep well plates up to 35 mm tall.

Item # PCRCENT is proudly made in the USA! Click here for more made in America products!
 

PR1MA Roto-Mini Series

  • Includes tube holders for common tube sizes, 11 x 1.5 / 0.2 mL (pack of 2), 5 x 10-15 mL (pack of 2), 5 x 5-7 mL (pack of 2), 6 x 50 mL (pack of 1)
  • Plus model available with variable speed control and advanced shaking / mixing modes: Mix (Oscillating), Pause, Rock

The new PR1MA™ Roto-Mini Series of rotating mixers provide a wide range of mixing capabilities. Suitable for an array of laboratory applications including resuspension, protein binding, nucleic acid purification, etc. the mixers include interchangeable tube holders for accommodating all common tube sizes from 0.5 mL to 50 mL. The motion can be adjusted from vertical (end over end) mixing, to horizontal (rolling or hybridization style) mixing.

The Roto-Mini rotator is also available in a "Plus" configuration, providing the following additional features:

Variable speed:

5 to 70 rpm

Mix function:

Rotating in combination w/ oscillations (increased mixing)

Pause function:

Rotating with intermittent "stops" during rotation

Rock function:

Back and forth, gentle rocking motion (see-saw)


The Plus models are also compatible with rocking platform (4.5 x 3 in.), as well as a 96 x 0.2 mL tube/strip/plate holder for mixing PCR vessels in the "Mix" (oscillating) mode.

Specifications 

Speed (RFP2020)24 rpm
Speed (RMP2024)5 to 70 rpm
Mixing Modes (RMP2024)Mix, Pause, Rock
Dimensions10.8 x 6 x 6.5 in | 27.5 x 15.2 x 16.5 cm
Weight3 lbs | 1.4 kg
Electrical115 or 230 V, 50-60 Hz, 0.5A (RMP2020) 
Universal Voltage 100 to 240 V, 50-60 Hz, 0.5 A (RMP2024)
Warranty2 Years


Item #s RFP2020 and RMP2024 are made in the USA! Click here for more made in America products!
 

Item#:
ASROTOMIX


PR1MA MC-24 Touch High-Speed Microcentrifuge

The PR1MA MC-24 Touch is the first microcentrifuge in its class to feature touchscreen control. In addition to the next-generation control panel, the centrifuge also offers high speed (up to 13,500 rpm / 16,800 xg) and a unique COMBI-Rotor with lid that accepts both standard microtubes (1.5 / 2.0 mL) and PCR tubes/strips (0.2 mL), making this the perfect partner for any molecular biology laboratory.


The large, color touchscreen, shows the actual speed (in rpm or rcf) along with set and remaining time. Up to 9 speed/time profiles can be stored in memory and the home screen displays a “mySpin” icon for instant recalls a designated favorite profile.

Supplied with Benchmark’s unique COMBI-Rotor
, the MC-24 Touch will accept 24 × 1.5 / 2.0 mL tubes, 2 strips of 0.2 mL tubes (16 × 0.2 mL), and up to 12x spin column kits without requiring separate adapters. There is also an optional 8-place rotor for 5 mL and cryo tubes. Samples are kept cool, even during extended runs at the maximum speed setting by a proprietary air flow system that moves air evenly and quietly throughout the chamber.

The MC-24 Touch is cold room safe and carries a 2-year warranty.

  • Full-Color Touch Screen
  • mySpin 1 button program recall
  • COMBI-rotor accepts tubes and strips
  • Compact, only 9 x 12 x 7.75 In.
  • Variable speed control, set In rpm or rcf

The PR1MA MC-24 Touch High-Speed Microcentrifuge spins 24 1.5 / 2.0 mL tubes and 2 PCR strips simultaneously. 0.5 mL tube adapters (C1008-A5-6) are also available for purchase.

Specifications

Weight14 lbs. | 6.4 kg.
Electrical115V or 230V 50-60 Hz; 100W
Speed200 - 13500rpm (100 to 16800xg)
Capacity24 x 1.5/2.0 mL
2 x PCR Strips (16 x 0.2 mL)
8 x 5 mL
12 x 2 mL Spin Column
8 x Cryovials
Speed Increments100 rpm or 100 rcf
Timer20 sec. to 99 min. / cont.
MomentaryYes
Dimensions9 x 12 x 7.75 in.
(23 x 30.5 x 19.7 cm)
Weight14 lbs. | 6.4 kg.
Electrical115V or 230V 50-60 Hz; 100W
Warranty2 Years

Accessories

C2417-R58 x 5 mL rotor for PR1MA MC-24
C2417-R5-ADP2Cryovial adapter for C2417-R5, 8/pk

 

Item # MC24 is proudly made in the USA! Click here for more made in America products!
 

Item#:
ACAMMC24CENT

Benchmark BeadBath Duo

The BeadBath Duo series are the first laboratory baths designed for precision temperature control when used with water, or with (the increasingly popular) Lab Armor® thermal beads. Unlike any other laboratory bath, they feature a "MODE" button that can be used to toggle between "Bead" or "Water" mode. Choosing the correct mode will automatically adjust the operation and balance of the multiple internal heating and sensing elements to ensure optimal performance. The result is one combination bath that is suitable for accurate, and uniform temperature control in either condition.

While most research laboratories today are using water baths, many prefer the convenience of bead baths due to the advantages listed below. With the BeadBath Duo, the lab gets the best of both worlds, allowing conversion from one bath type to the other, with the simple press of a button. 

  • Two separate modes for BEADS AND WATER
  • Quik-Cal, simple in-lab calibration function
  • Offers all of the advantages of a "Bead Bath"
  • Eliminates constant refills (Burn-out protection)
  • Easy (accessory free) securing of tubes and bottles
  • Allows angled incubations
  • Runs constant (no wait for heat-up)

Note: Beads are not included with these items. For beads for baths, find them here.

Specifications 

Item #B2410B2402
Temp Range (Water)Ambient 5° to 80°C
Temp Range (Bead)Ambient 5° to 70°C
Temp Accuracy0.2°C
Temp Uniformity (Water)± 0.2°C at 37°C
Temp Uniformity (Bead)± 0.9°C at 37°C
Temp Increments0.1°C1.0°C
Exterior Dims
(W x D x H)
10.8 x 16 x 12 In.
274.32 x 406.4 x 304.8 mm
6.5 x 8 x 6 In.
165.1 x 203.2 x 152.4 mm
Chamber Dims
(W x D x H)
9.5 x 11.8 x 6.1 In.
241.3 x 299.72 x 154.94 mm
5.5 x 6 x 4 In.
139.7 x 152.4 x 101.6 mm
Weight15 lbs. |6.8 kg.4.5 lbs. |2.0 kg.
Electrical115 V or 230 V | 50-60 Hz
Warranty2 Years 


Proudly made in the USA! Click here for more made in America products!
 

Item#:
ASH2OBEADBTH


Nanoject III Programmable Nanoliter Injector

 

For accurate injection volumes down to 0.6 nanoliters, the Nanoject III Programmable Nanoliter Injector is a feature-rich tool designed for precision and usability. With a few taps on the touchscreen, users can program the state-of-the-art unit for efficient single manual injections or multiple injection cycle recipes.

 

The unit incorporates proven hydraulic technology to ensure accurate, consistent injection volumes. With easy positive micropipette attachments, no O-Ring is required. Enjoy a wide range of applications thanks to user-friendly design coupled with proven technology that gives operators the ability to select and control the injection rate. The Nanoject III™ opens a world of possibilities for lower injection volume management.

 

Accessories

  • Nanoject Glass Capillaries: Replacement capillary tubes. Available in 3.5 In. or 7 In. length. Bores have 1.14 mm O.D.
  • Nanoject III™ Collet Kit: Replacement Collet Kit, includes 1 Collet, 1 Chuck, 1 Seal, 1 Replacement wire plunger, and 1 Allan wrench
  • Nanoject III™ Rubber Seals: Replacement rubber seals.
  • Nanoject III™ Black Seals: Replacement black seals.
  • Nanoject II™ O-Ring Kit: O-ring kit, includes 1 collet, 1 small O-ring, 1 spacer, 1 compression O-ring, 1 Allan wrench
  • Nanoject III™ Wire Plunger: Replacement wire plunger.
  • Nanoject 30 Gauge Needle: 2 In. long, 30 gauge needle
  • Nanoject III™ Foot Switch: Easy, hands-free experience for empty and fill/injection functions.

Proudly made in the USA! Click here for more made in America products!
 

Item#:
ASNANOJECTIII


Need Cold Storage in a Hurry?

MIDSCI Delivers Fast with ABS|American BioTech Supply!


5-8 Days Shipping on Fast Track Freezers & Refrigerators

Check out the Laboratory FastTrack | Pharmacy FastTrack flyers for full details.

  

Items are subject to change without notice. Fast delivery options may end at any time and are dependent on stock availability and location. 

While we strive to ensure the accuracy of all product descriptions and shipping timelines,

delivery times may vary based on factors such as order volume and shipping carrier performance. 

MIDSCI™ and ABS|American BioTech Supply reserve the right to modify or discontinue promotions at their discretion.

All terms and conditions apply.

Standard Glass Door Laboratory Refrigerator

The Standard Series Glass Laboratory Refrigerators are purpose built for scientific and medical applications.  Standard Series Glass Door Laboratory Refrigerators feature a digital microprocessor temperature controller allowing for the precise temperature management necessary for critical samples and supplies.  A forced air directional refrigeration system provides superior temperature uniformity and recovery after door openings.

The temperature display and alarm module offers product security with a monitoring and alarm system.  Real-time sample simulated temperatures are constantly displayed and supported by audible/visual high and low temperature alarms. 
Environmentally friendly, natural hydrocarbon (HC) refrigerants (not containing hydrofluorocarbons) vastly reduce global-warming potential (GWP) while meeting new EPA/SNAP mandates and UL, ASHRAE compliance guidelines.
  • 115v, 60 Hz, 3 Amps, 1/5 Hp
  • Etl Listed
  • Microprocessor Temperature Controller
  • Digital Temperature Display
  • Audible and Visual High and Low Temperature Alarms
  • 2 Probes; 1 in Air and 1 in Sample Bottle
  • Remote Alarm Contacts
  • Adjustable Operating Temperature: 1°C to 10°C

Proudly made in the USA! Click here for more made in America products!
 

Standard Glass Door Chromatography Refrigerator

The Standard Chromatography Refrigerators feature a microprocessor temperature controller and display, allowing for precise temperature control, verification and recovery versus mechanical style thermostats.  
One interior duplex electrical outlet and one side all port hole is provided to simplify the setup and operation of laboratory procedures.  An interior fan driven, forced-draft air circulation system provides excellent temperature uniformity and recovery after door openings.

All Chromatography units require two electrical outlets.
Environmentally friendly, natural hydrocarbon (HC) refrigerants (not containing hydrofluorocarbons) vastly reduce global-warming potential (GWP) while meeting new EPA/SNAP mandates and UL, ASHRAE compliance guidelines
  • Cycle Defrost
  • 115v, 60 Hz, 3 Amps, 1/5 Hp
  • Etl Listed
  • Microprocessor Temperature Controller
  • Digital Temperature Display
  • Audible and Visual High and Low Temperature Alarms
  • 2 Probes; 1 in Air and 1 in Sample Bottle
  • Remote Alarm Contacts
  • Adjustable Operating Temperature: 1°c to 10°c

Proudly made in the USA! Click here for more made in America products!
 

PR1MA Touch Power Supply

  • Touch screen control
  • Bright color display
  • Dual orientation, auto-rotating display

The PR1MA Touch is a workhorse electrophoresis power supply, ideal for the efficient separation of nucleic acids and proteins as well as basic western blotting applications. Four pairs of output jacks are wired in parallel for connecting multiple electrophoresis tanks. A color touch screen allows quick setting and monitoring of all run conditions, including run time, voltage, and current. Users can select “Constant Current” or “Constant Voltage” during an electrophoresis run, keeping the chosen parameter fixed as resistance changes. The dual orientation design with a rotating display allows the PR1MA Touch to be installed in the most convenient location, on a shelf or bench, saving valuable space.

 

The PR1MA Touch features a logical user interface.

Setting up an electrophoresis run couldn’t be easier; simply touch the parameter to select it, press the “up” and “down” arrows to adjust the value, and then touch “Start”. All parameters are always displayed, with no need to toggle between Time, Voltage, or Amperage. In addition, the run status is always displayed.

 

Specifications


Output SettingsConstant voltage or constant current
Voltage Output10 to 300 V (1 V increments)
Current Output4 to 400mA  (1 mA increments)
Max Wattage100 W
Timer1 min. to 20 hours or continuous
Output Terminals4 pairs (wired in parallel)
SafetyNo load detection, overload detection with power limitying function
Display2 x 2 In. color touchscreen
Dimensions8.5 x 6.3 x 4.0 In.
Weight2 lbs
Electrical*100 V to 230 V, 50-60 Hz (Universal Input)
Warranty2 years

 

Proudly made in the USA! Click here for more made in America products!
 

Item#:
ASPR1MAMYVLTTCH


General Purpose Solid Door Manual Defrost Freezer

The Standard Manual Defrost Freezers are intended for general purpose applications where precise temperature control and maintenance are not essential and there are no requirements for temperature alarms. Manual defrost units have been designed to operate without product damaging auto defrost cycles. 

The NSPF units have natural refrigerants.  The Hydrocarbon Manual Defrost Freezers take a large step forward in performance from past solid door general purpose units; offering a digital temperature display and alarm module coupled with a microprocessor temperature controller.

Defrosting of the unit will need to be performed periodically to prevent severe ice build-up.

Corepoint is Going Green!  We are an industry leader in providing a variety of Refrigerators and Freezers that are built with Hydrocarbon Refrigerants, R290 or R600a.

Environmentally friendly, natural hydrocarbon (HC) refrigerants (not containing hydrofluorocarbons) vastly reduce global-warming potential (GWP) while meeting new EPA/SNAP mandates and UL, ASHRAE compliance guidelines.

Periodic manual defrost is required on these units.

Proudly made in the USA! Click here for more made in America products!

Item#:
AS-20FREEZ


Limited-Time Offer: Exclusive Savings & Free Product!

For a limited time only, purchase select Bullet Blender Gold+ or
Storm Pro models and get two FREE RINO Bullet Blender Navy Bead Lysis Kits!

 

Eligible Models:

BB5EAUP (Bullet Blender Gold+) | BB24AUP (Bullet Blender Gold+) | BT5E (Storm Pro) | BT24M (Storm Pro)

 

Simply add two [Item # NAVYR1-RNA-VF] Bead Lysis Kits

to your cart for your free item!

 

OR

 

Save $500 off the list price of the Bullet Blender® 5E Pro (BT5E):
Was: $5,225 | With Discount: $4,725

 

Save $1,000 off the list price of the  Bullet Blender® E5 Gold+ (BB5EAUP):
Was: $9,985 | With Discount: $8,985

 

Contact us for special pricing, reference promo code #BLTPRO25

 

 

Free Bead Lysis Kits available with the purchase of specified items at listed price only. Offer cannot be combined with any other discounts or promotions.
Not valid on prior purchases. Special pricing applies only to the specific items listed above—no substitutions or combination offers.
Offer valid through 06/30/2025 or while supplies last. All 
terms and conditions apply.

 


 

Bullet Blender® Gold+ Homogenizers
 

The Bullet Blender® Gold for tougher tissue/cell samples (mouse femur, tumor, and skin) now is dry ice compatible, eliminating sample heating during homogenization. All samples are automatically homogenized in the same manner, with high yields, so there is very little variation from sample to sample. There are no probes or blades to cause cross-contamination or sample loss, which also means there are no parts to clean between runs!

  • Available with CE certification
  • Made in the USA
  • Can be used in temperatures ranging from 4°C to 40°C. Altitude: < 2000 m
  • Storage Temperature: -40°C to 50°C
*avoid condensation, which will damage electronics and void the warranty

Bullet Blender® 50 Gold+ (BB50AUP)
 

Our largest dry-ice-cooled homogenizer. Can process tissue samples up to 3.5 g or cell culture combined with beads up to 20 mL. Process up to 4 tough tissue samples or up to 8 soft samples in 50 mL HIPPO tubes in parallel.


Includes

  • Pack of 20, 50 mL HIPPO tubes
  • 2 Packs of 4 sleeves (8 sleeves in total)
  • Wholly scooper (to scoop dry pellets without the powder)
  • 12V DC Wall Plug Power Cord
  • Basic Starter Kit:
    • Bead Sample Pack: 20 mL centrifuge tubes of 8 different types of beads
    • 500 uL microspoon and 1.2 mL spoon

Bullet Blender® E5 Gold+ (BB5EAUP)
 

Homogenizer for tissue or cell cultures. Can process up to 12 samples in parallel, each sample up to 1 g each in a 5 mL GATOR tube or in *1.5 / 2 mL tubes using the tube adapters (purchased separately).

Includes

  • Pre-filled 5 mL GATOR snap cap tubes with beads, 3 each (Pink, Red, Green, and Navy)
  • 25 Pack of 5 mL GATOR snap cap tubes
  • Wholly scooper (to scoop dry pellets without the powder)
  • 24 V DC power supply
  • Basic Starter Kit:
    • Bead Sample Pack: 10 mL samples of 9 different bead types.

Bullet Blender® 24 Gold+ (BB24AUP)
 

Homogenizer for 24 0.3 g samples in microcentrifuge tubes with a very powerful motor. Used with 1.5 mL GATOR snap cap Tubes RINO screw cap tubes.
 

Includes

  • Contact plate for use with GATOR Tubes
  • 40 Pack of 1.5 mL GATOR snap cap Tubes
  • Wholly scooper (to scoop dry ice pellets without the powder)
  • 24 V DC power supply
  • Basic Starter Kit:
    • Bead Sample Pack: 5 mL samples of eight different bead types.
    • Pre-filled 1.5 mL RINO® tubes with beads, 4 each (Pink, Red, Green, Navy)
    • 50 Pack of 1.5 mL RINO® screw-cap tubes

Proudly made in the USA! Click here for more made in America products!


Bullet Blender® 50DX+
 

Extra-powerful Bullet Blender® 50DX homogenizes better and faster. Processes up to 4 tough tissue samples or up to 8 soft samples in parallel. Each sample can be up to 3.5 g of tissue or 3.5 mL of pelleted cells combined with a buffer of up to 20 mL. Use HIPPO brand 50 mL self standing tubes with plug seal cap. 

Air cooling minimizes sample heat up. Updated touchscreens allow for easy use. CE certified.

 

Includes

  • 20 Pack of 50 mL HIPPO™ tubes
  • 2 Packs of 4 sleeves (8 sleeves in total)
  • 12 V DC Wall Plug Power Cord
  • Basic Starter Kit:
    • Bead Sample Pack: 20 mL centrifuge tubes of 8 different types of beads
    • 500 uL microspoon and 1.2 mL spoon

Proudly made in the USA! Click here for more made in America products!
 


Limited-Time Offer: Exclusive Savings & Free Product!

For a limited time only, purchase select Bullet Blender Gold+
or Storm Pro models and get two FREE RINO Bullet Blender Navy Bead Lysis Kits!

 

Eligible Models:

BB5EAUP (Bullet Blender Gold+) | BB24AUP (Bullet Blender Gold+) | BT5E (Storm Pro) | BT24M (Storm Pro)

 

Simply add two [Item # NAVYR1-RNA-VF] Bead Lysis Kits

to your cart for your free item!

 

OR

 

Save $500 off the list price of the Bullet Blender® 5E Pro (BT5E):
Was: $5,225 | With Discount: $4,725

 

Save $1,000 off the list price of the  Bullet Blender® E5 Gold+ (BB5EAUP):
Was: $9,985 | With Discount: $8,985

 

Contact us for special pricing, reference promo code #BLTPRO25

 

 

Free Bead Lysis Kits available with the purchase of specified items at listed price only. Offer cannot be combined with any other discounts or promotions.

Not valid on prior purchases. Special pricing applies only to the specific items listed above—no substitutions or combination offers.

Offer valid through 06/30/2025 or while supplies last. All terms and conditions apply.

  

 


Bullet Blender® Pro Homogenizers
 

Homogenize your toughest samples (mouse femur, skin, tumor, etc.) in just minutes. Air cooling minimizes sample heat up. Updated touchscreens allow for easy use. CE certified.
 

Bullet Blender® 5E Pro (BT5E)
 

Our most powerful homogenizer! Process up to 12 samples at a time in 5 mL GATOR tubes and * 1.5 / 2 mL Tubes w/ adapter. Great for tough samples up to 1 g in size.

Includes

  • 24 V 3.75 amp DC Power Supply (UL / CE)
  • Power cord
  • Basic Starter Kit:
    • Bead Sample Pack: 10 mL samples of 9 different bead types
    • 100 uL and 500 uL microspoons
    • Pre-filled 5 mL GATOR snap cap tubes with beads, 3 each (Pink, Red, Green, Navy)
    • 25 Pack of 5 mL GATOR snap cap tubes 

Bullet Blender® Storm Pro (BT24M)
 

Quickly homogenize up to 24 of your toughest samples. Uses 1.5 mL RINO® screw cap tubes or 1.5 mL GATOR snap cap tubes.

 Includes

  • Contact plate for use with 1.5 mL GATOR snap cap tubes
  • 40 Pack of 1.5 mL GATOR snap cap tubes
  • 24 V 2.5 amp DC Power Supply (UL / CE)
  • Power cord
  • Basic Starter Kit:
    • Bead Sample Pack: 5 mL samples of 8 different bead types
    • 100 uL microspoon
    • Pre-filled 1.5 mL RINO® tubes with beads, 4 each (Pink, Red, Green, Navy)
    • 50 Pack of 1.5 mL RINO® screw cap tubes

Bullet Blender® Lite (BT12LT)
 

The all new Bullet Blender® Lite can homogenize up to 12 samples. Uses 1.5 mL GATOR snap cap tubes. Can accommodate 1.5 mL RINO® screw cap tubes *with the purchase of an adapter.

 Includes

  • 24 V 2.5 amp DC Power Supply (UL / CE)
  • Power cord
  • Basic Starter Kit:
    • Bead Sample Pack: 5 mL samples of 8 different bead types
    • 100 uL microspoon
    • Pre-filled 1.5 mL GATOR snap cap tubes with beads, 4 each (Pink, Red, Green, Navy)
    • 40 Pack of 1.5 mL GATOR snap cap tubes

Proudly made in the USA! Click here for more made in America products!
 

View: