• Two separate modes for BEADS AND WATER
• Quik-Cal™, simple in-lab calibration function
• Offers all of the advantages of a "Bead Bath"
• Eliminates constant refills (Burn-out protection)
• Easy (accessory free) securing of tubes and bottles
• Allows angled incubations
• Runs constant (no wait for heat-up)

Specifications 

Proudly made in the USA! Click here for more made in America products!
  

PR1MA™ Sodium Chloride, Powder

CAS Number: 7647-14-5
Molecular Weight: 58.4
Chemical Formula: NaCl
Solubility: Water
Storage Temp: Room Temperature

Research or further manufacturing use only, not for food or drug use.

• Appearance: Fine White Granular Powder
• Acidity or Alkalinity: Pass Test
• Appearance of Solution: Clear, Colorless Solution
• Arsenic : ≤ 1 µg/g
• Assay: 99.0 - 100.5 %
• Barium: Pass Test
• Bromides: ≤ 0.010 %
• Ferrocyanide: Pass Test
• Heavy Metals : ≤ 5 ppm
• Identification (Chloride): Pass Test
• Identification (Sodium): Pass Test
• Loss on Drying: ≤ 0.5 %
• Magnesium & Alkaline Earth Metals:  0.01 %
• Iron(Fe): ≤ 2 µg/g
• Nitrites: ≤ 0.01
• Phosphates : ≤ 0.0025 %
• Sulfate: ≤ 0.020 %

Sodium, Chloride, PR1MA, MIDSCI, Laboratory Supplies, High-Quality, Research, Consumables, Reagents, Equipment, Customer Service, Quick Shipping, Satisfaction Guarantee, Personalized Solutions, Universities

PR1MA™-Shell Plates - 384-Well, Full Skirted

Discover the next generation of PCR plates: Rugged Polycarbonate Frame + Polypropylene Wells

Engineered for unparalleled durability, PR1MA™-Shell PCR Plates are designed to accommodate all laboratory workflows and are ideal for use on automated liquid handling platforms.

PR1MA™-Shell sets a new standard in performance and convenience.

• The polycarbonate frame is rigid and flat to facilitate a firm grip by robotic arms and ensure reliable placement
• Polypropylene wells provide optimal thermal transfer and higher reaction efficiency
• White well options enhance the fluorescence signal during qPCR
• Wells are slightly raised to ensure evaporation-proof sealing with film, foil, or strip caps
• ANSI/SBS footprint and well spacing
• Vibrant colors offer a visual distinction between different samples or experiments
• Certified free of detectable RNase, DNase, DNA, PCR inhibitors, and tested pyrogen-free 

Proudly made in the USA! Click here for more made in America products!
  

PR1MA™-Shell Plates - 96-Well, Full Skirted

Discover the next generation of PCR plates: Rugged Polycarbonate Frame + Polypropylene Wells

Engineered for unparalleled durability, PR1MA™-Shell PCR Plates are designed to accommodate all laboratory workflows and are ideal for use on automated liquid handling platforms.

PR1MA™-Shell sets a new standard in performance and convenience.

• The polycarbonate frame is rigid and flat to facilitate a firm grip by robotic arms and ensure reliable placement
• Polypropylene wells provide optimal thermal transfer and higher reaction efficiency
• White well options enhance the fluorescence signal during qPCR
• Wells are slightly raised to ensure evaporation-proof sealing with film, foil, or strip caps
• ANSI/SBS footprint and well spacing
• Vibrant colors offer a visual distinction between different samples or experiments
• Certified free of detectable RNase, DNase, DNA, PCR inhibitors, and tested pyrogen-free

Proudly made in the USA! Click here for more made in America products!
 

PR1MA™ Penicillin G Sodium Salt [Benzyl Penicillin Sodium Salt]

Common Name: Benzyl Penicillin Sodium Salt
CAS Number: 69-57-8
Molecular Weight: 356.4
Chemical Formula: C₁₆H₁₇N₂NaO₄S
Solubility: Water
Storage Temp: 2-8°C

Inhibitor of bacterial cell wall synthesis. Active against gram positive and some gram negative bacteria. β-Lactamase sensitive.

Research or further manufacturing use only, not for food or drug use.

• Appearance: White crystalline powder
• Potency : 1500 - 1750 U/mg
• Assay: 96.0 - 102.0 %
• Identification: Pass Test
• Loss on Drying: ≤ 1.0 %
• pH: 5.5 - 7.5
• Specific Optical Rotation: +285 - +310 °
• Absorbance 264 nm: 0.80 - 0.88
• Absorbance 280nm: ≤ 0.10
• Absorbance 325nm: ≤ 0.10
• Related Substances: Conforms to standard
• Bacterial Endotoxins : Conforms to standard
• Sterility: Conforms to standard
• Country of Origin : Report

Penicillin, G, Sodium, Salt, PR1MA, MIDSCI, Laboratory Supplies, High-Quality, Research, Consumables, Reagents, Equipment, Customer Service, Quick Shipping, Satisfaction Guarantee, Personalized Solutions, Universities

PR1MA™ Novobiocin Sodium Salt

CAS Number: 1476-53-5

Molecular Weight: 634.61

Chemical Formula: C31H35N2NaO11

Solubility: Water

Storage Temp: 2-8°C

Novobiocin Sodium Salt is an antibiotic that is a member of the coumarin class of antibiotics and is mainly effective against Gram-positive bacteria. In microbiology and molecular biology research, Novobiocin Sodium Salt is used as a selective agent.

Research or further manufacturing use only, not for food or drug use. 

• Appearance: White to yellow powder
• Description - USP: Meets Test
• Novobiocin (Dried Basis)-USP: ≥ 850 µg/mg
• Identification - USP: Positive
• Specific Rotation Dried Basis - USP: -58 to -50  o
• Identification A - USP: Positive
• Identification B - USP: Positive
• pH(USP): 6.5 - 8.5
• Loss on Drying - USP: ≤ 6.0 %
• Residue on Ignition - USP: 10.5 - 12.0 %
• Crystallinity - USP: Meets Test
• Acetone - USP: ≤ 5000 ppm
• Isooctane - USP: ≤ 5000 ppm
• Assay Use Value: ≥ 845 ug/mg
• Impurities Total HPLC Normal: ≤ 10.0 %
• Impurities Unspecified: ≤ 0.2 %
• Novobiocin-2,3-Carbonate: ≤ 0.6 %
• A-Ring Amide: ≤ 0.3 %
• Decarbamyl Novobiocin: ≤ 5.0 %
• Isonovobiocin: ≤ 3.0 %
• A-Ring Hydroxy: ≤ 1.0 %
• Carbamyl Novobiocin: ≤ 3.0 %
• DES-2-Isobutenyl: ≤ 0.5 %
• DES-A-Ring Alpha-Keto-Carboxylic Acid: ≤ 0.5 %
• O-Desmethylnovobiocin: ≤ 0.3 %
• O-Desmethyl descarbamyl novobiocin: ≤ 0.3 %
• A-Ring Carbamyl: ≤ 0.5 %
• 8- Desmethyl novobiocin: ≤ 0.2 %
• Carbamyl Novobiocin + Decarbamyl Novobiocin + Isonovobiocin: ≤ 11.0 %
• BSE/TSE Free: BSE/TSE Free
• Country of Origin: USA 

Proudly made in the USA! Click here for more made in America products!
  

PR1MA™ Proteinase K

CAS Number: 39450-01-6
Solubility: Water
Storage Temp: -20°C

From Tritirachium album. Serine protease for proteolytic inactivation of nucleases during isolation of DNA and RNA.

Shipping Weight: 0 lbs
Shipping Dimensions: 1.25 x 1.75 x 1.25

Specifications

Appearance: White to Off White Lyophilized Solid
Solubility: 50mM Tris-HCl (pH 7.5), 3mM CaCl2, 50% Glycerol
Purity: ≥ 98.0 %
DNase/ RNase: Not Detected
Activity: ≥ 30.0 U/mg
Unit Definition: 1 unit is defined as the amount of enzyme that will liberate 1.0 µmol of tyrosine from casein/min @37°C, pH 7.5
Country of Origin: China

Research or further manufacturing use only, not for food or drug use.

Proudly made in the USA! Click here for more made in America products!
  

Proteinase, K, PR1MA, MIDSCI, Laboratory Supplies, High-Quality, Research, Consumables, Reagents, Equipment, Customer Service, Quick Shipping, Satisfaction Guarantee, Personalized Solutions, Universities

PR1MA™ Formamide, Super Pure

Formamide, Super, Pure PR1MA, MIDSCI, Laboratory Supplies, High-Quality, Research, Consumables, Reagents, Equipment, Customer Service, Quick Shipping, Satisfaction Guarantee, Personalized Solutions, Universities

PR1MA™ Sucrose

CAS Number: 57-50-1
Molecular Weight: 342.3
Chemical Formula: C₁₂H₂₂O₁₁
Storage Temp: Room Temperature

Ultra-high purity, double crystallized to remove any remaining inorganic and organic contamination. Produces a clear colorless solution. Used for cultivating protoplasts and "in vitro" multiplication of plant tissue.

Research or further manufacturing use only, not for food or drug use.

• Appearance: Fine White Crystals
• Absorbance 260nm: ≤ 0.07 nm
• Absorbance 280nm: ≤ 0.05
• DNase, RNase, protease: Not Detected
• Heavy Metals: ≤ 0.0005 %
• Identification (IR): Pass
• Purity: ≥ 99.0 %
• Solubility (10% solution in H₂O @ 25^oC): Pass
• Sulfate: ≤ 0.005 %

Proudly made in the USA! Click here for more made in America products!
  

Sucrose, PR1MA, MIDSCI, Laboratory Supplies, High-Quality, Research, Consumables, Reagents, Equipment, Customer Service, Quick Shipping, Satisfaction Guarantee, Personalized Solutions, Universities

PR1MA™ Sodium Acetate, Anhydrous

CAS Number: 127-09-3
Molecular Weight: 82.0
Chemical Formula: C₂H₃O₂Na
Solubility: Water
Storage Temp: Room Temperature

Research or further manufacturing use only, not for food or drug use.

• Appearance: White Powder
• Assay: ≥ 99.0 %
• pH (5% Solution): 7.0 - 9.2
• Solubility: Soluble in Water
• Loss on Drying (120 ^oC): ≤ 1.0 %
• Calcium (Ca): ≤ 0.005 %
• Chloride (Cl): ≤ 0.002 %
• Heavy Metals (as Pb): ≤ 0.001 %
• Insoluble Matter: ≤ 0.01 %
• Iron (Fe): ≤ 0.001 %
• Magnesium (Mg): ≤ 0.002 %
• Phosphate: ≤ 0.001 %
• Sulfate (SO₄): ≤ 0.003 %
• Grade: Meet USP/ACS Specifications

Sodium, Acetate, Anhydrous, PR1MA, MIDSCI, Laboratory Supplies, High-Quality, Research, Consumables, Reagents, Equipment, Customer Service, Quick Shipping, Satisfaction Guarantee, Personalized Solutions, Universities

PR1MA™ Phleomycin 20 mg / mL Solution

CAS Number: 11006-33-0
Molecular Weight: 1526.5 g/mol
Chemical Formula: C₅₅H₈₅O₂₁N₂₀S ₂Cu • HCl
Solubility: Water
Storage Temp: -20°C

Supplied at a concentration of 20 mg/ml.

Research or further manufacturing use only, not for food or drug use.

• Appearance: Clear Blue Solution
• Concentration: = 20 mg/ml
• Odor: None
• Solubility (20 mg/ml in Water): Freely soluble
• Sterile Filtered: Pass test
• UV Absorbance 244nm (200 ug/ml): 0.75 - 1.05

Phleomycin, 20mg/ml, Solution, PR1MA, MIDSCI, Laboratory Supplies, High-Quality, Research, Consumables, Reagents, Equipment, Customer Service, Quick Shipping, Satisfaction Guarantee, Personalized Solutions, Universities

PR1MA™  Thiamine Hydrochloride [Vitamin B1]

Common Name: Vitamin B1
CAS Number: 67-03-8
Molecular Weight: 337.3
Chemical Formula: C₁₂H₁₇CIN₄OS • HCl
Solubility: Water
Storage Temp: 2-8°C

Research or further manufacturing use only, not for food or drug use.

• Appearance: White Crystalline Powder
• Appearance of Solution: Clear, no more color than reference solution Y7 or GY7
• Identification: Should be positive reaction
• Identification (IR): Consistent with the reference IR spectra
• pH: 2.7 - 3.3
• Sulfates: ≤ 300 ppm
• Limit of Nitrate: No brown ring is produced at the junction of the two layers
• Lead: ≤ 2 ppm
• Water: ≤ 5.0 %
• Residue on Ignition: ≤ 0.1 %
• Absorbance of Solution: ≤ 0.025
• Residual Solvents (Methanol): ≤ 0.3 %
• Residual Solvents (Ethanol): ≤ 0.5 %
• Related Substance (Impurity A): ≤ 0.15 %
• Related Substance (Impurity B): ≤ 0.3 %
• Related Substance (Impurity C): ≤ 0.15 %
• Related Substance (Any Other Impurity): ≤ 0.1 %
• Related Substance (Total impurities): ≤ 0.5 %
• Related Compounds: ≤ 1.0 %
• Chromatographic Purity: ≤ 1.0 %
• Assay: 98.5 - 101.0 %
• Staphylococcus Aureus: Negative
• Salmonella: Negative
• E.Coli: Negative
• Total Plate Count: ≤ 1000 cfu/g
• Yeast and Mold: ≤ 100 cfu/g
• Material Source: Acrylonitrate; Acetamidine HCl; Chlorine Ester
• Production Method: Chemical Synthesis
• BSE/TSE Free: BSE/TSE Free
• Non Animal Origin: Non Animal Origin
• Conclusion: This product complies with the specification of BP/USP/FCC.
• Country of Origin: Report

Thiamine, Hydrochloride, PR1MA, MIDSCI, Laboratory Supplies, High-Quality, Research, Consumables, Reagents, Equipment, Customer Service, Quick Shipping, Satisfaction Guarantee, Personalized Solutions, Universities