Introducing the UNIVERSAL 320 benchtop centrifuge for Clinical, Research and Industrial applications. The UNIVERSAL 320 offers laboratories a true workflow benefit due to its vast capabilities as mid-sized, general purpose, tabletop centrifuge. Available with temperature control, the UNIVERSAL 320R refrigerated centrifuge offers a unique fast-cool function that will lower the unit to +4 °C in 10-15 minutes saving you valuable time spinning delicate samples.

The Hettich ROTINA 420/ ROTINA 420R is a high performance benchtop centrifuge for large volumes, yet not overly large in size. The new, compact, 2-liter bench top centrifuges are for high sample throughput as well as for high sample volumes. With a maximum capacity of 4 x 600 ml, (140) blood collection tubes, (52) 15 mL conical tubes or (16) microtitre plates, the ROTINA 420 and ROTINA 420R refrigerated centrifuges are ideal for applications in clinical chemistry, in biotechnology and in life science research facilities.

Whether you are working with BLOOD, URINE, CELL/TISSUE CULTURE, PLATES or CYTOLOGY the UNIVERSAL 320 and ROTINA 420 benchtop centrifuge will provide consistent, accurate results spin after spin. For additional peace of mind, Hettich centrifuges come with a Five (5) Year Warranty. Our centrifuge bundles ship complete with all the necessary components to perform your applications effortlessly. Hettich Packages include a centrifuge, rotor, buckets, adapters and bio-containment lids (when applicable).

FlexiFuge is a versatile, personal micro-centrifuge for quick, low speed centrifugation. Whisper quiet motor offers two speeds (2000g / 5,000g or 9,200 RPM ) depending on application. Flexifuge can be operated in continuous mode, pulsed for a short burst of rapid centrifugation, or timed to spin from 1-15 minutes.

Regardless of setting, rotors stop once the lid release button is pushed. A ring of LED lights illuminate when the unit is active and can be viewed through the transparent lid. Color can be changed (red, green, blue) or turned off by a switch under the unit.

Flexifuge is supplied with an 8-Place fixed angle rotor for 1.5ml tubes, a rotor for (2) 8x0.2ml PCR tube strips, 8 adapters for 0.5ml tubes and a 4-place rotor to spin 5ml micro-centrifuge tubes.

1 Year Warranty

GCM-B (Blue)
GCM-G (Green)
GCM-R (Red)

The GCM Series was designed with your lab in mind... whether you spin-down microcentrifuge tubes, PCR tubes or PCR Strips, the GCM will provide you with reliable performance use after use. Operating the GCM is quick and easy; close the lid to accelerate to 7,000rpm and simply open the lid for quick deceleration to stop.

Included in all GCM Mini Centrifuges are an eight (8) position microcentrifuge tube rotor for 1.5 / 2.0mL tubes, a PCR tube rotor that accommodates 0.2mL tubes and strips as well as eight (8) adapters for 0.2mL tubes and eight (8) adapters for 0.5mL tubes. Changing rotors requires no tools - simply pull up to remove and press down to replace.

Features:

• Ideal for quick spin-downs and microfiltration
• EZ-Swap? rotor attachments can be interchanged without tools
• Includes eight (8) position 1.5 / 2.0mL rotor, 16 position 0.2mL PCR tubes and strips rotor, 8 each 0.2mL adapters and 8 each 0.5mL adapters
• Available in your choice of 3 lid colors: red, blue or green
• Fast acceleration and braking
• "Close to start - open to stop" functionality
• 7000rpm seed (2680 x G)
• Small, lightweight and portable
• Runs quietly

Technical Data:

Centrifuge Acessories:

GCM-ROT:   Rotor for GCM Series Mini Centrifuges, 7000rpm, 8-Place for 1.5 & 2.0mL tubes

The GCH-24 Hematocrit Centrifuge allows your lab to determine erythrocyte fractions in blood as well as micro solution separations using the included twenty-four (24) place capillary rotor. The included rotor lids enhance user safety and are easy to remove or replace.

Programming is simple with the backlit LCD display, intuitive control buttons and parameter adjustment knob. The timer will not count down until the programmed speed is reached, ensuring accurate results. Setpoint can be set by G-Force or RPM.

Features:

• Speed range of 200-14,000rpm, max. RCF 18,620 x G
• Independent control of speed and time
• Easy operation with intuitive menu and easy-to-read display
• Maintenance free brushless DC motor
• Pulse operation for quick spins
• Included hematocrit rotor: 24 capillary capacity, max. speed of 12,000rpm
• Optional tube rotor: 24 place 1.5/2mL capacity, max. speed of 14,000rpm
• Includes pulse operation (quick spin)

Advanced Features:

• Speed/RCF switch
• Short-time run function
• Audible alert function

Safety Functions:

• Door interlock
• Overspeed detector
• Over-temperature detector
• Automatic internal diagnosis
• Automatic rotor identification

Technical Data:

Hematocrit Centrifuge Accessories:

GCH-24-ROT-1.5-2:   Rotor for the GCH-24 Centrifuge, 24-Place for 1.5mL/2.0mL, 14000rpm max

GCM-24-AD2:  Rotor Adapters for GCM-12, GCM-24, GCH-24 for 0.2mL Tubes, 24/bag

GCM-24-AD5:  Rotor Adapters for GCM-12, GCM-24, GCH-24 for 0.5mL Tubes, 24/bag

• Combination rotor holds 4 x 15 mL and 50 mL in same rotor
• Up to 6,800 rpm and 4,394 x g
• Compact only 11 in. wide
• Unique EZ-Scroll™ touch pad

The Z207-A-CMB includes a convenient combination rotor that holds 4 x 15 mL and 4 x 50 mL tubes in the same rotor. With the combination rotor there is no longer a need to switch rotors or use adapters to centrifuge 15 mL and 50 mL tubes for tissue culture. You can even process them simultaneously! Along with the unique combination rotor, the Z207-A-CMB features the unique EZ-Scroll™ touch pad which gives you ease of control and a modern feel. An advanced microprocessor control allows for setting/displaying of the rotational speed in either rpm or RCF in increments of 10. In addition to retrieving saved programs, the easy to use front panel can be used to adjust acceleration/deceleration rates, run time, and change the end of run alarm tone. There is also a momentary spin function that will run while the button is pressed. Additionally, the Z207-A-CMB features a sleep mode to save energy by shutting off after a certain time if not being used while on, which can be toggled on or off easily.

Specifications

Hermle Z207-H | Compact Hematocrit Centrifuge

• Unique EZ-Scroll™ touch pad
• High speed, up to 16,058 x g
• Compact, 11 inch wide
• Holds 24 Capillaries

Due to its compact design the Z207-H Hematocrit Centrifuge is the perfect centrifuge for even the smallest of lab spaces. It is equipped with a hematocrit rotor for 24 x capillaries. Accompanied by Hermle's easy to use control panel, the unique EZ-Scroll touch pad, gives you ease of control and a modern feel. An advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or RCF in increments of 10. In addition to retrieving saved programs, the easy to use front panel can be used to adjust acceleration/deceleration rates, run time, and change the end of run alarm tone. There is also a momentary spin function that will run while the button is pressed. Additionally, the Z207-H features a sleep mode to save energy by shutting off after a certain time if not being used while on, which can be toggled on or off easily.

Specifications

• Eight rotor options with capacity up to 44 x 1.5/2.0 mL
• High speed, 15,000 rpm/21,379 x g
• Accepts tubes from 0.2 mL to 5 mL
• Advanced controls with automatic rcf conversion

Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory.

All common microtubes (0.2 mL, 0.5 mL, 1.5 mL, 2.0 mL) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5 mL dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges.

Specifications

  Brochure

• Multipurpose, 11 available rotor options
• Up to 14,000 rpm and 16,058 x g
• Swing out rotor options for tubes and plates
• Indicator Light, easily view cycle status
• Unique EZ-Scroll™ touch pad

The Z287-A exceeds the limitations set forth by traditional microcentrifuges which are restricted solely to fixed angle rotors for microtubes. Instead, this compact, next generation model features an expansive line of swing out and fixed angle rotors options that accept microplates and test-tubes up to 50 mL. We have designed this centrifuge to be our most compact and economical. A true workhorse for any lab requiring a centrifuge that can accommodate many fields of research.

Specifications

Multi-Purpose, one compact centrifuge that accepts:

• Swing out rotors (12 x 15 mL or 8 x 50 mL)
• High Speed microtube rotors (up to 18,624 x g)
• Low-Medium speed fixed angle rotors for 15 mL to 50 mL

The Z306 is a compact and economical centrifuge with a series of rotor options making it well suited for clinical, industrial, and research laboratories. Despite the impressive capacity of the 4 x 145 mL rotor (capable of supporting 8 x 50 mL or 12 x 15 mL with the use of rotor inserts), the Z306 is surprisingly compact with a footprint of just over 14 x 18 inches. An optional rotor is also available for microplates (2 x 3 microplates), positioning this model as one of the smallest, and least expensive centrifuges capable of high speed microplate centrifugation.

Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.

Specifications

 Brochure

• Extremely versatile, 17 rotor options
• Advanced programming with automatic rotor recognition
• Available with refrigeration
• 12 x 15 mL and 8 x 50 mL swing out capacity

Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.

Specifications

Z366-BND Benchtop Universal Centrifuge

• 4 x 250 mL swing out rotor capacity, up to 16 x 50 mL and 40 x 15 mL
• Advanced programming with auto-rotor recognition
• Optional high speed rotors, providing up to 24,000 x g
• Available with refrigeration

For applications requiring increased capacity over the Z306 or Z326 series centrifuges, the Z366 series offer a unique Mid-Range swing out rotor that accepts a variety of different tubes, including up to 16 x 50 mL or 40 x 15 mL. Despite this step up in capacity, the Z366 maintains a surprisingly compact design, with the standard air-cooled model featuring a footprint of 17 x 20 inches.

In addition to the popular 4 x 250 mL swing out rotor, a variety of additional rotors are also available. Angled rotors range from a 24 x 1.5 mL micro rotor to a high capacity 6 x 250 mL rotor.

A 2 x 3 microplate rotor is also available, as well as a 4 x PCR strips (8-strips) rotor.

Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.

Specifications

• Benchtop design, with the speed/power of a floor model
• Super-Speed capability, up to 65,395 xg
• Wide variety of high speed rotor options

The Z36 HK is the result of many years of experience in the design of universal centrifuges, high speed centrifuges and compact microcentrifuges. The result is a "Super-Speed" centrifuge with unmatched performance among benchtop centrifuges. A robust motor drive powers a variety of high speed angled rotors to speeds that would generally only be achievable in large, floor-standing ultra centrifuges. 2.0 mL microtube samples can reach forces above 65,000 xg, while 50 mL samples, as high as 41,410 xg.

In addition to its high speed capabilities, the Z36 HK doubles as a universal centrifuge with a 4 x 250 mL swing out rotor (offering inserts for all common tube sizes) as well as a 2 x 3 position swing-out microplate rotor. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.

Specifications