Home  >  Equipment  >  Electrophoresis Systems  >  Gel Processing Systems
|◀ ◀ 25 - 36 of 42 ▶ ▶|
View:

Enduro™ Electrophoresis System 

  • Molded, durable construction
  • Rubber gates for easy, tapeless gel casting
  • Adjustable height combs
  • Loading guides aid in well visualization

Enduro Horizontal Gel Boxes have been designed for ease of use, safety and durability. A variety of sizes are available, from a mini gel system to a large maxi gel system that can accommodate as many as 450 samples in a single run. A wide range of accessories are available to customize your system, including multichannel compatible gel combs.

QUALITY CONSTRUCTION

The Enduro gel tanks are molded for leakproof performance and a long service life. The corrosion resistant platinum electrodes are located in cassettes to protect them during cleaning and provide for easy replacement. The lids fit on the gel boxes in only one direction. A drip ring on the lid recycles condensed buffer and prevents it from dripping directly onto the gel.

EASE OF USE

Casting gels for the Enduro system is very easy. Simply snap the rubber gates onto the ends if the tray, place the comb in position and pour the gel - no taping is necessary. Slots on the sides of the gel trays hold the combs in place. The two piece combs are designed so that the teeth can be raised or lowered to vary the depth of the well within the gel. The supplied combs are 1.5 mm thick. Combs of other thicknesses are available separately. After the gel has hardened, the combs and gates are removed and the gel and tray placed in the gel box. Loading strips may be placed on the bottom of the gel box to aid in well visualization. Gel trays are UV transparent.

DESIGNED FOR SAFETY 

The power leads for the Enduro system are attached to the gel box lid. The connection with the electrodes is made only when the lid is properly in place. Removal of the lid removes power from the system. Side tabs and pressure pads make lid removal easy and prevent sloshing of buffer.

*Complete system includes gel system, 7 X 7 cm tray, and (2) 8 tooth combs

Specifications

ItemEnduro 7.7Enduro 7.10Enduro 10.10Enduro 15.10Enduro 15.15Enduro 20.20
Unit Dims9 x 21 x 9 cm9 x 21 x 9 cm12.5 x 22 x 9 cm17.5 x 26.5 x 9 cm17.5 x 26.5 x 9 cm23 x 39.5 x 9 cm
Gel Size7 x 7 cm7 x 10 cm10 x 10 cm15 x 10 cm15 x 15 cm20 x 20 cm
Max Samples3264100140210450
Buffer Vol225 mL225 mL300 mL500 mL500 mL1200 mL
Combs
Included		(2) 8 tooth combs(3) 8 tooth combs(2) 10 tooth combs(1) 16 tooth comb,
(1) 20 tooth comb		(1) 16 tooth comb,
(1) 20 tooth comb,
(1) 28 tooth comb		(2) 40 tooth combs,
(2) 20 tooth combs

 
Combs for units: for E1007-7 AND E1007-10  
 

Item#:
ASPCRELCTP22
  • POWER- 150v/400ma
  • CONTROL- set voltage, amperage and time
  • FLEXIBILITY - runs 6x6cm to 12.5x12cm gels
  • THROUGHPUT - up to 112 samples at once
  • CONVENIENCE - casting set and combs included
  • WARRANTY: 1 year

Labnet's Enduro Gel XL includes all components necessary to cast and run horizontal gels: gel trays, combs, casting stand, gel tank and digital power supply. The migration tank, gel trays and multichannel combs are molded for leakproof performance and a long service life. The direct connection of the power supply into the gel box eliminates the need for power leads.

Pressing the eject button separates the gel box and power supply. Reconnecting is easy-just press the two pieces together. The power supply can be set to either constant voltage or constant current with automatic crossover between the two parameters. Parameters are shown on the large digital display that is easily visible from a distance.

There are three different gel options for the Enduro Gel XL; 12.5 x 12cm, 12.5 x 6cm and 6 x 6cm. One larger gel with multiple combs will accommodate up to 112 samples. Or run two small gels or four micro gels at the same time. Cassettes protect fragile electrodes from damage and allow for easy replacement.

A magnetic sensor allows current to flow to the electrodes only when the lid is in place. If the lid is removed while the system is operating, current is immediately shut down. In addition, the lid of the gel box is vented to dissipate heat produced during electrophoresis. To aid in visualizing the gel while it is running, there is a clear window over the gel platform.

Product Specifications 

Overall dimensions (WxLxH) 24.5 x 17.0 x 6.2 cm
Gel tank dimensions (WxLxH) 18.3 x 16.4 x 5.6 cm
Power supply dim. (WxLxH) 7.5 x 17.0 x 6.2 cm
Maximum sample capacity 112 (4-28 tooth combs)
Gel capacity Per run
Large (12.5 x 12 cm) 1 each
Small (12.5 x 6 cm) 2 each
Micro (6 x 6 cm) 4 each
Buffer capacity 300mL
Input voltage AC 100-240V, 50/60 Hz
Output voltage 10 - 150 V
Output current 10 - 400 mA
Timer up to 99 hours or continuous
Memory Last programmed parameters saved
Item#:
ASPCRELCTP21

Enduro 20 x 20 cm Horizontal Gel Rig

  • Molded, durable construction
  • Rubber gates for easy, tapeless gel casting
  • Adjustable height combs
  • Loading guides aid in well visualization

Enduro Horizontal Gel Boxes have been designed for ease of use, safety and durability. A variety of sizes are available, from a mini gel system to a large maxi gel system that can accommodate as many as 450 samples in a single run. A wide range of accessories are available to customize your system, including multichannel compatible gel combs.

QUALITY CONSTRUCTION - The Enduro gel tanks are molded for leakproof performance and a long service life. The corrosion resistant platinum electrodes are located in cassettes to protect them during cleaning and provide for easy replacement. The lids fit on the gel boxes in only one direction. A drip ring on the lid recycles condensed buffer and prevents it from dripping directly onto the gel.

EASE OF USE - Casting gels for the Enduro system is very easy. Simply snap the rubber gates onto the ends if the tray, place the comb in position and pour the gel - no taping is necessary. Slots on the sides of the gel trays hold the combs in place. The two piece combs are designed so that the teeth can be raised or lowered to vary the depth of the well within the gel. The supplied combs are 1.5 mm thick. Combs of other thicknesses are available separately. After the gel has hardened, the combs and gates are removed and the gel and tray placed in the gel box. Loading strips may be placed on the bottom of the gel box to aid in well visualization. Gel trays are UV transparent.

DESIGNED FOR SAFETY - The power leads for the Enduro system are attached to the gel box lid. The connection with the electrodes is made only when the lid is properly in place. Removal of the lid removes power from the system. Side tabs and pressure pads make lid removal easy and prevent sloshing of buffer.

Specifications

ItemEnduro 7.7Enduro 7.10Enduro 10.10Enduro 15.10Enduro 15.15Enduro 20.20
Unit Dims9 x 21 x 9 cm9 x 21 x 9 cm12.5 x 22 x 9 cm17.5 x 26.5 x 9 cm17.5 x 26.5 x 9 cm23 x 39.5 x 9 cm
Gel Size7 x 7 cm7 x 10 cm10 x 10 cm15 x 10 cm15 x 15 cm20 x 20 cm
Max Samples3264100140210450
Buffer Vol225 mL225 mL300 mL500 mL500 mL1200 mL
Combs
Included		(2) 8 tooth combs(3) 8 tooth combs(2) 10 tooth combs(1) 16 tooth comb,
(1) 20 tooth comb		(1) 16 tooth comb,
(1) 20 tooth comb,
(1) 28 tooth comb		(2) 40 tooth combs,
(2) 20 tooth combs

Combs for E1015-10 & E1015-15
 

Item#:
ASPCRELCTP20

Wide Format Gel System 23.5 cm x 14 cm


 Horizontal Wide Format Gel System for 23.5cm x 14cm gels. Includes UVT gel tray four comb slots and end gates & (4) 50 Tooth combs, 1.5 mm thickness.
System Description

A high-capacity system in a mini-gel size, the Galileo 2314 unit enables rapid separation of large numbers of samples.

The 2314 wide format system accomodates up to 200 samples per run, for quick separation and high thru-put. Because of the wide format of the Galileo 2314 unit, the 23cm wide by 14cm long tray is non-gasketed. Gel casting can be accomplished by taping, or we recommend the G-80-WADJ-CST multi-casting unit for even quicker and more convenient gel casting. The gel tray is UV transmissible, includes an imprinted fluorescent ruler, and has 4 comb slots. Choose from a wide variety of comb options, all with micro-titer spacing for easy loading with multi-channel pipets.
System Features

The Galileo 2314 complete system includes these features:

  •     Heavy duty lower buffer chamber
  •     Interlock safety lid with attached leads
  •     Non-gasketed 23cm wide x 14cm long UV-transparent gel tray with built-in fluorescent ruler and 4 comb slots.
  •     Four 1.5mm x 50 tooth combs
  •     Opaque well visualization plate.
Item#:
ASWIDEFORGELSY23

Minigel System 9cm x 11cm & (1) 10 and (1) 14 tooth comb


Horizontal gel electrophoresis minigel system for 9cm x 11cm minigels. Includes gasketed UVT gel tray with fluorescent ruler, and (1) 10 and (1) 14 tooth comb, 1.5 mm thickness. Comb substitutions are available. Four year manufacturer warranty.

System description

The standard 0911 mini gel system includes a RapiCast™ gasketed gel tray for convenient gel casting right in the buffer chamber.

System features

The 0911 complete system includes these features:

  •     Heavy duty lower buffer chamber
  •     Interlock safety lid with attached leads
  •     Gasketed (cast in place) 9cm wide x 11cm long UV-transparent gel tray with built-in fluorescent ruler and 2 comb slots.
  •     One 1.5mm x 10 tooth comb
  •     One 1.5mm x 14 tooth comb
Item#:
ASMINGEL9AND11S

Double sided non- cooled vertical system, 10cm x 10cm


 Reflection double sided water cooled vertical system, 10cm x 10cm with or without casting base, two pack each of plain and notched glass, one acrylic blocker plate, (2) 10-well 0.8mm thickness combs, (4) 0.8 mm spacers. Four year warranty.
System Description

Run either one or two gels simultaneously on these versatile separation systems. The 10x10cm size of the system also accomodates most pre-cast gels.

Complete double sided vertical system for running one or two gels, in a 10 x 10 cm format. Unique casting bases allows both casting and running of gels without unclamping from the upper buffer chamber, providing for safer and more convenient gel handling. In addition the 1010 device will accommodate most precast gel cassettes on the market.

Water cooling feature is included for protocols that require it. Connections are easily made by attaching standard tubing over the 3/8" barbed in/out ports provided on the device. Water may be provided by tap or other temperature controlled water source. Optional alumina backer plates may be used to facilitate cooling efficiency and uniformity, and are available in the accessories list below.
System Features

The Galileo Reflection™ 85-1010 complete system includes these features:

  •     Heavy duty upper buffer chamber with cooling port connections.
  •     Lower buffer chamber.
  •     Interlock safety lid with attached leads.
  •     Casting base.
  •     Two-pack each of plain & notched glass plates.
  •     One acrylic blocker plate (used when running only one gel).
  •     Ttwo 10-well, 0.8mm thick combs
  •     Four 0.8mm thick side spacers.

System Accessories

Choose amoung these accessories to customize each system for your specific needs.

  •     Alumina cooling plate. For use with cooling systems. This plate can be sandwiched between the gel and the inner buffer chamber to improve overall temperature uniformity.
  •     Casting base. For quick, efficient and leak-proof casting.
  •     Multiple gradient caster.
Item#:
ASDOUBSIDNCVER10

ENDURO Modular Vertical Gel System


A modular system allowing PAGE, electroblotting and 2D gel electrophoresis to be carried out in the same tank, simply by changing the inserts. Users can purchase only the parts they need, or a complete combined system for a cost savings over buying all three systems separately.

  • Modular Design
  • PAGE, Electroblotting and 2D Electrophoresis
  • Quick and easy set up
  • Wide range of accessories
 
MODULAR SYSTEM 
 
The modularity of the ENDURO™ System is based on three operational inserts and a common buffer tank. All three inserts, PAGE, electroblotting and 2D electrophoresis, have their own electrode assembly that connects into the lid of the buffer tank. PAGE INSERT Set up of gels is quick and easy with the PAGE insert. A set of plates are placed on either side of the insert and held into place by the pressure bar. An additional gel may be run on each side by stacking the plates. The assembly is then placed into the casting stand for pouring the gel. After the gel is polymerized, the insert is removed from the casting stand and placed in the buffer tank.
 

ELECTROBLOTTING INSERT
 
The electroblotting insert has a capacity for 3 gels. Setting up blots is easy - gels are sandwiched in the blotting cassettes with the transfer membranes. The cassettes are then placed in the insert, which is in turn placed in the buffer tank. Coiled electrodes in the insert generate a high intensity current, allowing transfer to take place in about an hour.
 

2D ELECTROPHORESIS INSERT
 
This insert is used for running the first dimension of IEF gels. Up to ten 8 cm gels are poured in disposable capillary tubes and placed in this insert. Gasketed ports allow for easy insertion and removal of tubes. Blocking plugs are included for closing off ports that are not in use.
 

BUILT FOR SAFETY AND ENDURANCE
 
For leak-proof performance and a long service life, the buffer tank is molded from high quality acrylic. Pins on the top of the inserts ensure that the lid is placed onto the insert in the proper orientation. These pins also aid in removal of the lid. Removing the lid disconnects power to the electrodes.

 
ACCEPTS MOST PRE-CAST GELS
 
Most precast gels, including NuSep™, Bio-Rad™, Invitrogen™, and Cambrex™, can be used with the ENDURO™ PAGE System. The use of precast gels saves time by eliminating the need to pour gels and wait while they polymerize.

 
WIDE RANGE OF ACCESSORIES
 
A variety of combs and spacers of varying widths are available to customize your ENDURO™ system. All are color coded and clearly marked for easy identification. Both notched and plain plates can be purchased with spacers permanently bound for easy set up. Additional fiber pads and replacement cassettes are also available as well as capillary tubes, blanking ports and tube supports. Cooling packs are also available to help reduce buffer temperature during higher voltage or longer runs.
Item#:
ASEDIROMOVERGES

Minigel System w/ 4 comb slots, 12 cm x 14 cm

Horizontal gel electrophoresis system for 12cm x 14cm minigels. Includes gasketed UVT gel tray with fluorescent ruler, and (1) 12 and (1) 20 tooth comb, 1.5 mm thickness. Comb substitutions are available. Four year manufacturer warranty.
 
System Description

This flexible system from Galileo is the perfect personal unit for a wide range of separation needs, and our most popular model.

Unit features RapidCast trays for quick in-unit gel casting of 12cm wide by 14cm long gels.

Choose a complete system or build your own custom unit from the many system components we offer.  The NEBT-80-1214 gel system is supplied with a RapidCast™ gasketed gel tray for convenient gel casting directly in the buffer chamber.  Choose from a wide variety of comb options.  All are compatible with Owl Separation Systems B2A or similar devices.  The teeth on combs marked as "microtiter" are uniformly spaced for easy loading with multichannel pipettors.System features

System Features

The Galileo 1214 complete system includes these features:

  •     Heavy duty lower buffer chamber
  •     Interlock safety lid with attached leads
  •     Gasketed (cast in place) 12cm wide x 14cm long UV-transparent gel tray with
  •     built-in fluorescent ruler and 2 comb slots.
  •     One 1.5mm x 12 tooth comb
  •     One 1.5mm x 20 tooth comb

System Options
 
The Galileo 1214 unit can be also be ordered with our new automatic buffer recirculation system (80-1214-R) or with installed buffer ports for connection to an external buffer recirculation system (80-1214-BEP)
Item#:
ASMINGEL412AND14

Horizontal Gel System, 15cmW x 25cmL


Galileo large gel systems are designed for high resolution of complex analytes. All units feature long run lengths, with medium to high capacity units available. High quality 9mm thick rugged acrylic construction, resists cracking and warping.
 
Your safety ensured with interlocking lid, protected sockets and permanently attached power cords. Epoxy sealed electrode connections, resist corrosion and leaks. Gold plated banana plugs.
Meets or exceeds IEC1010-1 standards. Safe & Reliable UV transmissible gel trays with built-in fluorescent rulers.

Large units feature trays with multiple comb slots for veratility. Machined finger grooves on the tray sides for easy and sure handling. Wide range of comb configurations, including multi-channel capability. Selected units available with buffer recirculation capabilities. Combs specifications clearly marked on each comb. Optional casting methods for flexibility, convenience and speed.

Convenient & Versatile
 
  • Exceptional resolution.
  • Platinum electrodes configured to provide uniform field for straight runs.
  • Multiple comb slot options for a wide range of sample and run-length configurations.
Item#:
ASHORIZGELSY15
20 x 25cm
Gel Size: 20cm(W) x 25cm(L)
Buffer volume: 1200ml

The IB56000 HR2025 is a high resolution system ideal for separation of nucleic acids  in agarose gels. It is also designed for rapid screening of PCR fragments, RFLP analysis or 
plasmid screening, field inversion, genomic DNA separations and electrophoresis  procedures requiring recirculation. Constructed of 3/8" cast acrylic to provide years of 
trouble-free service. Withstands high voltage and high temperatures and will not warp or crack like molded units do.

This System Comes Complete with:

  • Buffer Tank
  • Patented Vented Lid
  • IB56020 UVT Casting Tray
  • IB56030 Casting Fixture
  • Two, 2.0mm x 20-tooth combs
  • Power Cords
  • Bubble Level
  • Buffer Ports
  • 4 year warranty

 

Specifications:

Unit Dimensions: 8.3cm(H) x 26.7cm(W) x 39.4cm(L)

Gel Dimensions: 20cm x 25cm

Maximum sample capacity: 160 samples (4 combs, 40 samples each)

Buffer Capacity: 1200ml

Distance between electrodes: 35cm
Item#:
ASPCRELCTP5
25 x 25cm
Gel Size: 25cm(W) x 25cm(L)
Buffer volume: 1500ml

This high throughput system is designed to complete analysis of up to 200 samples 
from microtiter plates and is ideal for running all types of precast gels. The large format 
can run gels in less than 30 minutes.

 

Specifications:

Unit Dimensions: 8.3cm(H) x 26.7cm(W) x 39.4cm(L)

Gel Dimensions: 25cm x 25cm

Maximum sample capacity: 300 samples (6 combs, 50 samples each)

Buffer Capacity: 1500ml

Distance between electrodes: 35cm

This System Comes Complete with:

  • Buffer Tank
  • Patented Vented Lid
  • IB57020 UVT Casting Tray
  • IB57030 Casting Fixture
  • Four, 2.0mm x 50-tooth combs
  • Power Cords
  • Bubble Level
  • Buffer Ports
  • 4 year warranty
Item#:
ASPCRELCTP4
10cm x 15cm

Gel Size: 10cm(W) x 15cm(L)
Buffer volume: 500ml

The MP-1015 is the ideal Multi-Purpose gel box for both extended high resolution, linear runs, and economical quick screens. The MP-1015 contains buffer recirculation ports for long runs requiring recirculation. The MP-1015 is constructed of 3/8" thick, cast acrylic, to withstand high voltages and temperature extremes. Unlike single piece molded units, the MP1015 will NOT warp or crack during extended use. This unit is designed to provide years of continuous operation.

Specifications:

Construction: Buffer tank is constructed of 3/8" thick, cast acrylic. Casting tray bottom is constructed of UV transmittance cast acrylic to allow viewing of the gel with a UV light source

Unit Dimensions: 7cm(H) x 16.5cm(W) x 30.5cm(L) Gel Dimensions: 10cm x 15cm

Shipping weight: 4.5 Lbs.

Distance between the electrodes: 27cm

Maximum Sample Capacity: 80 samples (4 combs, 20 samples each)

Buffer Capacity: 500ml

The maximum suggested applied voltage for the electrophoresis of DNA in agarose gels using the IB53000-MP1015 is 140 volts. In a 1% TBE gel, this translates into a run time of approx. 1 hour. Lower voltages can be used of course, and as a general rule a 70 volt run will take twice as long as a 140 volt run. Higher voltages can be used to decrease run time however, higher voltages can produce excessive heat and decrease sample resolution.

Complete System Includes:

  • Buffer Tank

  • Patented Vented Lid

  • IB53020 UVT Casting Tray

  • IB53030 Casting Fixture

  • Two, 2.0mm x 16-tooth combs

  • Power Cords

  • Bubble Level

  • Buffer ports

  • 4 year Warranty
Item#:
ASPCRELCTP3
|◀ ◀ 25 - 36 of 42 ▶ ▶|
View: