Hoefer® Air-Cooled Vertical Electrophoresis System

Compact, rugged, and economical units ideal for educational laboratories with multiple users.

• Maximum glass plate size 18 x 16 cm
• Rugged injection molded construction is durable and assembles easily
• Run two gels with the addition of a divider plate
• Built-in casting stand seals leak free
• Choose from a wide variety of accessories
• Plates, clamps, spacers, and combs are interchangeable with the SE600 Series 

Hoefer® Air-Cooled Complete Unit (SE400-15-15)

• Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads, 1/ea
• Upper Buffer Chamber, 1/ea
• Safety Lid with Electrodes, 1/ea
• Glass Plates, 18 x 16 cm, 2/pk
• Clamp Assemblies, 16 cm, 2/pk
• Cams, 2/pk
• Slotted Gasket for Upper Buffer Chamber, 1/ea
• Bubble Level, 1/ea
• Laminated Gasket for Casting Stand, 1/ea
• Spacer-Mate-Alignment Template, 1/ea
• Wonder Wedge Plate Separation Tool, 1/ea
• Gel Seal, 1/ea
• Comb, 15-well, 1.5 mm thick, 1/ea
• Spacers, 1.5 mm thick, 2 cm wide, 2/pk 

Hoefer® Air-Cooled Basic Unit (SE400)

The same as above without the combs and spacers. Order one SE511 comb and one set of 16 cm long spacers separately.

Specifications
 

Plate Size (W x H)	7.09 x 6.30 In. | 18 x 16 cm
Spacers	0.75 mm, 1.0 mm, 1.5 mm
Max. Power	500 V, 60 mA, 20 W
Max. Temp.	113ºF | 45°C
Indoor Use	39.2 to 104ºF | 4 to 40°C
Humidity	Up to 80%
Dims (D x W x H)	5.91 x 9.45 x 11.02 In. | 15 x 24 x 28 cm
Weight	6.83 | 3.10 kg

Hoefer® Max Horizontal Agarose Electrophoresis System

Offers a variety of gel lengths and comb sizes to enable the design of the gel required for optimum resolution of DNA fragments. Facilitates high-resolution separation of nucleic acid fragments 100 bp to 20 kbp. Three different length trays are available for use with this unit. 

• Self-locating/centering guides support consistent running tray placement
• Gel anchor feet prevent the gel from floating or sliding during the run
• A variety of comb sizes enables customization of sample throughput to fit your laboratory's requirements
• Adjustable comb height—complete control over well depth
• Three casting kits available—enabling users to run 15 x 20, 15 x 15, or 15 x 10 cm gels in the same unit
• Gel Casting Kit Includes 15 x 10, 15 x 15, or 15 x 20 cm Running Tray, 15 x 10, 15 x 15, or 15 x 20 cm Casting Tray, and 4 Foam Gaskets

Complete Unit (HE99X-15-15)

• Buffer Chamber Assembly, 1/ea
• Safety Lid with High Voltage Leads, 1/ea
• Running Tray, 15 x 20 cm, 1/ea
• Casting Tray, 15 x 20 cm, 1/ea
• Foam Gaskets, 4/pk
• Bubble Level, 1/ea
• 1.5 mm thick, 15-well comb, 1/ea
• Comb Back, 1/ea

Basic Unit (HE99X)

The same as above, without the Running Tray, Casting Tray, Comb, and Comb Back. Order a casting kit, combs, and comb backs separately.

Specifications
 

Gel Dims (W x L)	5.91 x 7.87 | 5.91 x 5.91 | 5.91 x 3.94 In. 15 x 20 | 15 x 15 | 15 x 10 cm
Max. Buffer Vol.	1.2 L
Max. Power	200 V, 100 mA, 20 W
Max. Capacity	60 Samples
Max. Temp.	113ºF | 45°C
Indoor Use	39.2 to 104ºF | 4 to 40°C
Humidity	Up to 80%
Dims (D x W x H)	14.17 x 7.17 x 5.51 In. | 36 x 18.2 x 14 cm

Azure Aqua Quad Mini-Cell

Vertical Gel Running System

Designed for running 1–4 precast or hand-cast gels (cassette size 10cm x 8cm) for electrophoresis. The locking side fasteners provide a tight seal that ensures rapid and easy electrophoresis. The unit comes equipped with 4 gel casting stands and casting frames, perfect for hand casting your own gels.

Simply align the spacer and short glass plates, seal between the hinges, and allow your gel to polymerize. Insert the polymerized gel into the electrophoresis module for an efficient gel-running experiment.

Includes:

• 4 gel casting stands and casting frames buffer dam
• 5 spacer plates (1mm)
• 10 short glass plates
• 5 15-well combs
• 5 10-well combs
• 5 sealing gaskets
• 5 gel shovels
• Tank and lid with power cables
• Primary and Secondary Electrode Cores

Features

• The Azure Aqua Quad Mini-Cell is designed for running 1–4 precast or hand-cast gels (cassette size 10cm x 8cm) for electrophoresis. The locking side fasteners provide a tight seal that ensures rapid and easy electrophoresis.
• The unit comes equipped with 4 gel casting stands and casting frames, perfect for hand casting your own gels: Simply align the spacer and short glass plates, seal between the hinges, and allow your gel to polymerize.
• Insert the polymerized gel into the electrophoresis module for an efficient gel-running experiment.

Specifications
 

Parameters	Azure Aqua Quad Mini-Cell Specs
Unit dimensions (W x L x H)	13.5 cm x 17.5 cm x 19 cm
Weight	2.2 lbs
Recommended power supply	Azure Aqua Power Supply 600V
Number of gels	1-4 precast (most major brands) or handcast gels
Tank buffer volume	2 gels: 540 mL | 4 gels: 1100 mL
Maximum gel size	6.7 cm x 8.6 cm
Typical run times	30-45 minutes at 200V
Gel cassette size (WxL)	10 cm x 8 cm

 

Double sided water cooled vertical system, 10cm x 10cm

Extra Wide Large Format Gel System, 23.5cmW x 40cm

•     Heavy duty lower buffer chamber
•     Interlock safety lid with attached leads
•     End gated 23cm wide x 40cm long ExpressCast™ UV-transparent gel tray with built-in fluorescent ruler and 12 comb slots.
•     Two 1.5mm x 25 tooth combs
•     Two 1.5mm x 50 tooth combs

MaGELin Mini Protein System

• For 10 cm x 10 cm cast-your-own polyacrylamide gels
• Comes with dual casting system
• 3 sets of glass plates and 2 sets of 0.8 mm thickness spacers.
• Buffer tank, dual gel capture, vented lid and power cords included

The IB94000 MaGELin Mini protein system comes complete with everything you need to pour 10 cm x 10 cm cast-your-own gels. This highly versatile system will also accommodate the IB95000 Western Transfer module so when you’re not running gels the unit can be used as a dedicated Western transfer system.
 

The IB94000 comes complete with:

• Dual gel capture device for running two gels simultaneously.
• Dual gel casting system that allows casting outside of the running unit.
• Three sets of glass plates for pouring and running gels
• Two sets of special 0.8 mm side spacers to seal the gel sandwich during pouring
• Buffer tank
• Vented lid
• Power cords.
• Two 0.8 mm x 12-tooth combs.

The IB94000 utilizes a unique spacer and casting system to make it easy and fast to cast your own gels. The special side spacers are made specifically to accommodate the thickness of each glass slide that comes with the unit. These side spacers will produce a 0.8 mm thick gel. Once the glass plates have been assembled using the side spacers, they can now be inserted into the gel casting unit. This unit accommodates two sets of glass plates simultaneously. The bottom of the gel casting unit contains a very soft gel-like gasket that will seal the bottom of the gel sandwich. Once the gel sandwich is placed inside the casting unit, place the lid of the casting unit on top and press gently to fasten using the included thumb screws. Once fastened the lid will provide the correct amount of down pressure on the gel sandwich to seal the bottom and hold them in place. The polyacrylamide solution can now be introduced through the opening in the casting fixture lid. 

Extra Wide Format Gel System, 23.5 cm x 25 cm

•     Heavy duty lower buffer chamber
•     Interlock safety lid with attached leads
•     End gated 23cm wide x 25cm long ExpressCast™ UV-transparent gel tray with built-in fluorescent ruler and 14 comb slots.
•     Two 1.5mm x 25 tooth combs
•     Two 1.5mm x 50 tooth combs

Double sided water cooled vertical system, 20cmW x 10cm

Double sided non cooled vertical system, 20cmW x 10cm

•     Heavy duty upper buffer chamber with cooling port connections
•     Lower buffer chamber
•     Interlock safety lid with attached leads
•     Casting base
•     Four-pack each of plain and notched glass plates
•     One acrylic blocker plate (used when only one gel is being run)
•     Eight 0.8mm thick side spacers
•     Four combs of your choice

•     Alumina cooling plate for use with cooling systems. This plate can be sandwiched between the gel and the inner buffer chamber to improve overall temperature uniformity.
•     Casting base for quick, efficient and leak-proof gel casting.

Enduro 15 x 10 cm Horizontal Gel Rig

• Molded, durable construction
• Rubber gates for easy, tapeless gel casting
• Adjustable height combs
• Loading guides aid in well visualization

Enduro Horizontal Gel Boxes have been designed for ease of use, safety and durability. A variety of sizes are available, from a mini gel system to a large maxi gel system that can accommodate as many as 450 samples in a single run. A wide range of accessories are available to customize your system, including multichannel compatible gel combs.

QUALITY CONSTRUCTION - The Enduro gel tanks are molded for leakproof performance and a long service life. The corrosion resistant platinum electrodes are located in cassettes to protect them during cleaning and provide for easy replacement. The lids fit on the gel boxes in only one direction. A drip ring on the lid recycles condensed buffer and prevents it from dripping directly onto the gel.

EASE OF USE - Casting gels for the Enduro system is very easy. Simply snap the rubber gates onto the ends if the tray, place the comb in position and pour the gel - no taping is necessary. Slots on the sides of the gel trays hold the combs in place. The two piece combs are designed so that the teeth can be raised or lowered to vary the depth of the well within the gel. The supplied combs are 1.5 mm thick. Combs of other thicknesses are available separately. After the gel has hardened, the combs and gates are removed and the gel and tray placed in the gel box. Loading strips may be placed on the bottom of the gel box to aid in well visualization. Gel trays are UV transparent.

DESIGNED FOR SAFETY - The power leads for the Enduro system are attached to the gel box lid. The connection with the electrodes is made only when the lid is properly in place. Removal of the lid removes power from the system. Side tabs and pressure pads make lid removal easy and prevent sloshing of buffer.

Specifications 

Enduro 10 x 10 cm Horizontal Gel Rig

The Enduro 96 is an ideal complement to the Labnet Enduro Horizontal Gel Box line. The 96-well format unit is compatible with 8-channel pipettes and matches up with the standard 96 well plate configuration. The average run time is 15-30 minutes. The gel is in a 10 X 12 cm format with options for either 1 or 2 marker lanes. The layout of wells is designed to allow a run length of 1.8 cm per sample providing ideal separation. For those who already own an Enduro E1010, the Enduro 96 comb sets are available and compatible with these existing units.
Features include:

• 96 well format
• MCP compatible
• For high throughput analysis of PCR products

Specifications
 

Gel Dimensions	10 x 12 cm
Unit dimensions	22 x 12.5 x 9 cm
Buffer Volume	300 mL
Max sample capacity	96 samples plus 1 or 2 markers
Combs/number of samples	8 + 1x marker; 8 x 2x marker
Thickness	1; 1.5 mm

 

ENDURO VE20 Vertical Gel Electrophoresis System

Enduro VE20 Vertical Electrophoresis System (20 x 20 cm), includes glass plates, 2 x 24 well combs, cooling coil and casting base

• Large format vertical gel system
• Electroblotting and gel electrophoresis in same universal gel tank
• Quick assembly system for ease of use
• Complete system allows casting of gels and running of gels at same time increasing efficiency

The ENDURO VE20 is Labnet's new large format vertical gel electrophoresis system. It distinguishes itself in its flexibility of applications and ease of gel casting and set-up requiring only 4 screws to secure 4 gels. The same gel tank can house a large format electroblotting assembly sold separately. This system is ideal for first- and second dimension SDS-PAGE, native, preparative, gradient and high-resolution nucleic acid electrophoresis.

Innovative screw-clamp technology consists of only four screws to secure up to four 20 x 20cm gels. This vertical screw clamp technology distributes pressure evenly along the height of gel rather than in the center to eliminate plate bowing and gel compression, while maintaining a leak-proof seal during casting.

NO TANK TOP ASSEMBLY
A built-in inner buffer chamber within the PAGE insert allows set up to be completed without inclusion of an upper buffer chamber.

CASTING ADVANTAGES

• Dual purpose PAGE insert eliminates time consuming transfer of glass plates between separate casting and gel running components.
• Glass plates with bonded spacers assure clean well formation, correct alignment for leak-free casting and eliminates manually aligning spacers.
• Casting stand design ensures leak-free casting even if glass plates are misaligned.

Specifications: