PR1MA™ Starter Kit

The PR1MA™ Starter Kit is a comprehensive package that includes everything required to get started with accurate and reproducible pipetting. With this kit, you can ensure that your liquid handling tasks are consistent and precise. The PR1MA Starter Kit is perfect for new labs and customers who want to upgrade their existing pipetting equipment.

The PR1MA Starter Kit is different from other liquid handling starter kits because it contains four pipettes that cover a wide volume range of 0.5 µl to 1,000 µl. These pipettors are designed to provide accurate and reproducible results, and they are perfect for a wide range of applications. The pipettor volumes include 0.5 to 10 µl, 2.0 to 20 µl, 20 to 200 µl, and 100 to 1,000 µl.

In addition to the pipettes, the PR1MA Starter Kit includes three racks of PR1MA Low-Retention Pipette Tips. These tips are specially designed to reduce sample retention and ensure accurate and precise pipetting. The kit also includes a six-position carousel stand that can hold all four pipettes and a PR1MA Backpack for easy transport.

This kit offers over $250.00 in savings compared to purchasing the kit components separately!

Kit Includes:

• 4 – Alphapette™ by PR1MA Pipettors (10 μL, 20 μL, 200 μL, 1,000 μL)*

• 3 – Racks of PR1MA Low-Binding Pipette Tips (1 each: 10 μL, 200 μL, 1,250 μL tips)*

• 1 – Laptop-Compatible Backpack

• 1 – Six-Place Universal Carousel Pipette Stand

*No mix and match or switching pipettor or tip sizes. PR1MA™ Low Retention Graduated Pipette Tips are certified free of detectable RNase, DNase, DNA, PCR inhibitors, and tested pyrogen-free.

CheckIT Pipettor Accuracy Tester

• Validate the accuracy of your liquid handling robots or multi-channel pipettes daily or weekly.
• Quickly and easily measure the accuracy of your robot or multi-channel pipette.
• Concerned that a robot or a pipette was misused or needs calibration? Just Checkit. 

The Checkit Go is an easy-to-use, stand-alone, disposable cartridge that allows you to check the accuracy of your liquid handling robot or multi-channel pipette in just seconds. No additional equipment is required. The Checkit Go is interchangeable with well plates, so it works with all robots that handle 96 well plates. Compatible with all makes of multi-channel or electronic pipettes.

This simple device measures the dispensed volumes of up to 8 channels simultaneously. It is the size of a well plate, so you can use it in your robot or on a lab bench. You're done in under 10 seconds. That means no more trying to read a tiny droplet's weight on a high-precision balance and repeat for seven more channels.

The Checkit Go directly measures the volume of the liquid dispensed, not an indirect measurement of the weight or the color change of a liquid. In addition, the Checkit Go limits evaporation to negligible levels because the dispensed droplets are encased in glass tubes within seconds. Measurements are guaranteed to be accurate to within 2% and typically better than 1%.

Easy to Use

Just aspirate the included dye. Dispense the dye into the wells on the flip tab of the cartridge. Flip the tab, or let the robot flip the tab. Then, watch the dye travel up the 8 channels simultaneously. Finally, compare the level of the dye against the graduations. You can record the measurement with a simple photo.

The disposable cartridge shows the measured volume directly on the cartridge. Just compare the level of dye against the graduations without any expensive balances or spectrophotometric equipment.

MIDSCI Pipettor Calibration

Regular service and calibration every six months guarantee your pipettor is providing accurate, reproducible results every time. Our service keeps your pipettor in good operating condition and helps extend its lifetime.
 
Quality control, preventive maintenance, and calibration services are becoming increasingly critical for laboratories all over the world today.
 
To ensure the continuous accuracy and precision of your pipettors we offer high-quality calibration in a controlled environment. Our technicians perform all measurements with ISO 9001 Certified balances unlike having someone stop by the lab and hoping for the best in calibration and reproducibility.

Don't be deceived by other calibration services that offer low prices but charge extra for Seals and 0-rings.

Our professional pipettor calibration service includes:

• Replace Teflon Seal
• Replace O-Ring
• Recalibrate and Certify Pipettor
• Clean and Recondition: Piston, Shaft, Spring, and Other Critical Parts
• Rainin, Gilson, Eppendorf, AlphaPette, Labpette, Discovery, Sealpette, Oxford, Biohit, Denville XL3000, GeneMate, Lab 3, V3 Pipettors, Finnpipette and many other brands.
• MOST 8-12 channel Pipettors - call or email for a quote
• Contact us for large quantity discounts

Our trained technicians are dedicated professionals skilled in their work. They strive to return your pipettors within 2 - 5 working days after receipt. They will even give you a call when major parts need to be replaced! No surprises, just quality workmanship on the most important tool in your lab.

When sending your pipettors to us, please include the following information: 

1. Shipping Address
2. Billing Address
3. Purchase Order # or Credit Card Number
4. Name
5. Telephone Number
6. Telephone number of end-user

Click here to download our PDF worksheet.

Email for more information or call Phone: 800-227-9997 | St. Louis 636-225-9997

2 mL - 50 mL Pipette Filler

Labpette™ R Repeating Syringe Tips