VistaLab™ Reagent Reservoirs

• Superior low retention maximizes reagent recovery up to 67% better than comparable reservoirs
• Proprietary high wettability, hydrophilic surface treatment
• Trough-within-a-trough design channels “every last drop”
• Molded graduations on the inside walls
• Pour off spouts at every corner
• Molded structures designed for easy separation of stacked reservoirs
• Wide base for increased stability

Specifications
 

Sterile	Yes
Non-pyrogenic	Yes
Primary Color	White
Primary Material	Polystyrene
RNase/DNase Free	Yes

Proudly made in the USA! Click here for more made in America products!
  

PurePlus® PCR Plates

• PurePlus® plates are tested for RNase/DNase lot by lot to ensure pure product
• Our plates are lot certified free of Human DNA contamination
• Our plates are tested for ATP lot by lot to ensure pure consistent product
• Broad product range. Over 18 styles of plates fit most major thermocyclers
• These plates are autoclavable to 122° C for 15 minutes at 15PSI

Ultra Clear and Ultra Clean

PurePlus® sterile disposables, like all our other sterile products, receive valid sterilization processing compliant with ISO 11137. So unlike "pre-sterile" products from other suppliers you can use PurePlus® PCR disposables for diagnostic and regulated procedures.

Proudly made in the USA! Click here for more made in America products!
  

Hoefer® Mighty Small precast gels are high-performance mini polyacrylamide gels commonly used for protein separation. Utilizing the Bis-Tris buffer system, they effectively minimize protein modifications during electrophoresis, resulting in sharper and clearer protein bands with higher resolution.

• High loading capacity: 50 uL max. sample volume
• High resolution: Upgraded bis-Tris system for clearer, sharper separation bands and higher resolution
• Ready to use and easy to store: No solution preparation or gel casting is required, saving time. Store at 2 to 8ºC
• Good Repeatability: Fully automated gel casting process, minimal batch-to-batch variation, high stability, and good repeatability
• Highly effective: Max 40 min for electrophoresis
• Safe and non-toxic: No hazardous reagents need to be handled 

Compatible with Hoefer® Mighty Small II Vertical Electrophoresis Systems and the Hoefer® miniVE Vertical Protein Electrophoresis and Blotting Systems.  

Specifications
 

Item #	MSGT	MSGF
Plate Size	3.94 x 3.15 In. | 10 x 8 cm
Gel Size	3.35 x 2.76 In. | 8.5 x 7 cm, 1mm thickness
System/Buffer	Bis-Tris System, MOPS-SDS Buffer	Bis-Tris System, MOPS Buffer
Wells	12-well, 15-well
Storage	Store at 2 to 8°C. (35.6 to 46.4ºF) Do not freeze.
Concentration	Gradient Gels: 4 to 12%, 4 to 20% | Homogenous Gels: 10%, 12%
Loading Vol.	For 12 wells: max 50 uL (recommended: ≤ 25 uL) | For 15 wells: max 30 uL (recommended: ≤ 15 uL)

Hoefer® Combs for SUB15 and SUBHT Submarine Gel Electrophoresis Systems

Available in multiple tooth configurations and thicknesses to suit various sample volumes and well sizes. Hoefer® combs ensure sharp, consistent, well formation for accurate, reproducible results.

MC = Microtiter spacing for use with a multichannel pipette
Sample volume listed is for a 5 mm deep well

For use with SUB15 and SUBHT Submarine Gel Electrophoresis Systems

Specifications
 

Item #	Description	Wells	Teeth	Thickness	Width	Sample Vol.
SUB15-C1-10	SUB15 and SUBHT Comb	10 Wells	10 Teeth	1 mm	12.8 mm	64 uL
SUB15-C15-10	SUB15 and SUBHT Comb	10 Wells	10 Teeth	1.5 mm	12.8 mm	96 uL
SUB15-C2-10	SUB15 and SUBHT Comb	10 Wells	10 Teeth	2 mm	12.8 mm	128 uL
SUB15-C1-16MC	SUB15 and SUBHT Comb	16 Wells	16 Teeth	1 mm	6.4 mm	32 uL
SUB15-C15-16MC	SUB15 and SUBHT Comb	16 Wells	16 Teeth	1.5 mm	6.4 mm	48 uL
SUB15-C2-16MC	SUB15 and SUBHT Comb	16 Wells	16 Teeth	2 mm	6.4 mm	64 uL
SUB15-C1-20	SUB15 and SUBHT Comb	20 Wells	20 Teeth	1 mm	5.9 mm	29 uL
SUB15-C15-20	SUB15 and SUBHT Comb	20 Wells	20 Teeth	1.5 mm	5.9 mm	43 uL
SUB15-C2-20	SUB15 and SUBHT Comb	20 Wells	20 Teeth	2 mm	5.9 mm	58 uL
SUB15-C1-25	SUB15 and SUBHT Comb	25 Wells	25 Teeth	1 mm	3.5 mm	17 uL
SUB15-C15-25	SUB15 and SUBHT Comb	25 Wells	25 Teeth	1.5 mm	3.5 mm	25 uL
SUB15-C2-25	SUB15 and SUBHT Comb	25 Wells	25 Teeth	2 mm	3.5 mm	34 uL
SUB15-C1-30MC	SUB15 and SUBHT Comb	30 Wells	30 Teeth	1 mm	2.5 mm	12 uL
SUB15-C15-30MC	SUB15 and SUBHT Comb	30 Wells	30 Teeth	1.5 mm	2.5 mm	18 uL
SUB15-C2-30MC	SUB15 and SUBHT Comb	30 Wells	30 Teeth	2 mm	2.5 mm	24 uL

Proudly made in the USA! Click here for more made in America products!
  

Hoefer® Combs for SUB20 and SUB20C Submarine Gel Electrophoresis Systems

Available in multiple tooth configurations and thicknesses to suit various sample volumes and well sizes. Hoefer® combs ensure sharp, consistent, well formation for accurate, reproducible results.

• MC = Microtiter spacing for use with a multichannel pipette
• Sample volume listed is for a 5 mm deep well
• For use with SUB20 and SUB20C Submarine Gel Electrophoresis Systems

Specifications
 

Item #	Description	Wells	Teeth	Thickness	Width	Sample Vol.
SUB20-C1-16	SUB20 and SUB20C Comb	16 Wells	16 Teeth	1 mm	8.5 mm	35 uL
SUB20-C15-16	SUB20 and SUB20C Comb	16 Wells	16 Teeth	1.5 mm	8.5 mm	55 uL
SUB20-C2-16	SUB20 and SUB20C Comb	16 Wells	16 Teeth	2 mm	8.5 mm	75 uL
SUB20-C1-20MC	SUB20 and SUB20C Comb	20 Wells	20 Teeth	1 mm	7 mm	30 uL
SUB20-C15-20MC	SUB20 and SUB20C Comb	20 Wells	20 Teeth	1.5 mm	7 mm	45 uL
SUB20-C2-20MC	SUB20 and SUB20C Comb	20 Wells	20 Teeth	2 mm	7 mm	60 uL
SUB20-C1-28	SUB20 and SUB20C Comb	28 Wells	28 Teeth	1 mm	5 mm	20 uL
SUB20-C15-28	SUB20 and SUB20C Comb	28 Wells	28 Teeth	1.5 mm	5 mm	30 uL
SUB20-C2-28	SUB20 and SUB20C Comb	28 Wells	28 Teeth	2 mm	5 mm	40 uL
SUB20-C1-40MC	SUB20 and SUB20C Comb	40 Wells	40 Teeth	1 mm	3 mm	13 uL
SUB20-C15-40MC	SUB20 and SUB20C Comb	40 Wells	40 Teeth	1.5 mm	3 mm	19 uL
SUB20-C2-40MC	SUB20 and SUB20C Comb	40 Wells	40 Teeth	2 mm	3 mm	25 uL

 

Proudly made in the USA! Click here for more made in America products!
  

Hoefer® Combs for SUB10 Submarine Gel Electrophoresis Systems

Available in multiple tooth configurations and thicknesses to suit various sample volumes and well sizes. Hoefer® combs ensure sharp, consistent, well formation for accurate, reproducible results.

• MC = Microtiter spacing for use with a multichannel pipette
• Sample volume listed is for a 5 mm deep well
• For use with SUB10 Submarine Gel Electrophoresis Systems

Specifications

Proudly made in the USA! Click here for more made in America products!
 

Hoefer® Combs for SUB13 Submarine Gel Electrophoresis Systems

Available in multiple tooth configurations and thicknesses to suit various sample volumes and well sizes. Hoefer® combs ensure sharp, consistent, well formation for accurate, reproducible results.

• MC = Microtiter spacing for use with a multichannel pipette
• Sample volume listed is for a 5 mm deep well
• For use with SUB13 Submarine Gel Electrophoresis Systems 

Proudly made in the USA! Click here for more made in America products!
  

Hoefer® Combs for HE99X Max Horizontal Agarose Systems

Available in multiple tooth configurations and thicknesses to suit various sample volumes and well sizes. Hoefer® combs ensure sharp, consistent, well formation for accurate, reproducible results.

• All combs require HE91-BK comb back ordered separately
• Preparative combs have 1 preparative well and 2 reference wells
• Sample volume listed is for a 5 mm deep well
• For use with HE99X Max Horizontal Agarose Systems

Specifications

Proudly made in the USA! Click here for more made in America products!
  

Hoefer® Combs for SUB6 Submarine Gel Electrophoresis Systems

Available in multiple tooth configurations and thicknesses to suit various sample volumes and well sizes. Hoefer® combs ensure sharp, consistent, well formation for accurate, reproducible results.

• MC = Microtiter spacing for use with a multichannel pipette
• Sample volume listed is for a 5 mm deep well
• For use with SUB6 Submarine Gel Electrophoresis Systems

Specifications
 

Item #	Description	Wells	Teeth	Thickness	Width	Sample Vol.
SUB6-C1-8	SUB6 Comb	8 Wells	8 Teeth	1 mm	4.5 mm	20 uL
SUB6-C15-8	SUB6 Comb	8 Wells	8 Teeth	1.5 mm	4.5 mm	30 uL
SUB6-C2-8	SUB6 Comb	8 Wells	8 Teeth	2 mm	4.5 mm	40 uL
SUB6-C1-12MC	SUB6 Comb	12 Wells	12 Teeth	1 mm	2.5 mm	11 uL
SUB6-C15-12MC	SUB6 Comb	12 Wells	12 Teeth	1.5 mm	2.5 mm	17 uL
SUB6-C2-12MC	SUB6 Comb	12 Wells	12 Teeth	2 mm	2.5 mm	22 uL
SUB6-C1-16	SUB6 Comb	16 Wells	16 Teeth	1 mm	2.2 mm	10 uL
SUB6-C15-16	SUB6 Comb	16 Wells	16 Teeth	1.5 mm	2.2 mm	15 uL
SUB6-C2-16	SUB6 Comb	16 Wells	16 Teeth	2 mm	2.2 mm	20 uL

 

Proudly made in the USA! Click here for more made in America products!
  

Hoefer® Standard and Preparative Combs for Vertical Systems

Combs are precision machined from Teflon®, which is highly resistant to acids, bases, and all commonly used buffer systems. An important benefit of Teflon® combs, compared to other types, is that they are easily removed while maintaining gel integrity. They are lightweight and virtually unbreakable when used with reasonable care. Some combs have microtiter spacing for use with multi-channel pipettes.

• Standard Combs come attached to a standard back, which produces maximum well depths of 25 mm, except for the 28-well combs, which produce well depths of 15 mm. 15-well Standard Combs have microtiter spacing for use with multichannel pipettes.
• Preparative Combs have adjustable comb backs (10, 15, and 25 mm depth) and form 1 large preparative well plus 1 or 2 small reference wells.

Hoefer® Combs for HE33 Mini Horizontal Agarose Systems

Available in multiple tooth configurations and thicknesses to suit various sample volumes and well sizes. Hoefer® combs ensure sharp, consistent, well formation for accurate, reproducible results.

• All combs require HE31-BK comb back ordered separately
• Preparative combs have 1 preparative well and 2 reference wells
• Sample volume listed is for a 5 mm deep well
• For use with HE33 Mini Horizontal Agarose Systems

Specifications
 

Item #	Type	Wells	Teeth	Thickness	Width	Sample Vol.
HE31A-P-10	HE33 Comb	1/2 Wells	1/2 Teeth	1 mm	44/6 mm	235/35 uL
HE31A-P-15	HE33 Comb	1/2 Wells	1/2 Teeth	1.5 mm	44/6 mm	255/50 uL
HE31A-8-10	HE33 Comb	8 Wells	8 Teeth	1 mm	6.5 mm	32.5 uL
HE31A-8-15	HE33 Comb	8 Wells	8 Teeth	1.5 mm	6.5 mm	48.5 uL
HE31A-12-10	HE33 Comb	12 Wells	12 Teeth	1 mm	3.9 mm	19.5 uL
HE31A-12-15	HE33 Comb	12 Wells	12 Teeth	1.5 mm	3.9 mm	30.5 uL
HE31A-16-10	HE33 Comb	16 Wells	16 Teeth	1 mm	2.6 mm	13 uL
HE31A-16-15	HE33 Comb	16 Wells	16 Teeth	1.5 mm	2.6 mm	2.6 uL
HE31-BK	HE33 Comb Back and Two Screws

Proudly made in the USA! Click here for more made in America products!
  

Hoefer® Standard and Preparative Combs for Mini Vertical Systems

Compatible with SE300 MiniVE, SE260, and the SE250 Series Vertical Electrophoresis Systems.

Precision machined from Teflon®, which is highly resistant to acids, bases, and all commonly used buffer systems. An important benefit of Teflon® combs, compared to other types, is that they are easily removed while maintaining gel integrity. They are lightweight and virtually unbreakable when used with reasonable care. Some combs have microtiter spacing for use with multi-channel pipettes. (See Specifications.)

Standard Combs come attached to a standard back, which produces maximum well depths of 25 mm, except for the 28-well combs, which produce well depths of 15 mm.

• 9- and 18-well Standard Combs have microtiter spacing for use with multichannel pipettes.
• Preparative Combs have adjustable comb backs (10, 15, and 25 mm depth) and form 1 large preparative well plus 1 or 2 small reference wells.

Specifications
 

Item #	Type	Wells	Teeth	Thickness	Width	Depth
SE211A-5-75	Standard Comb	5 Wells	5 Teeth	0.75 mm	13 mm	9.8 mm
SE211A-5-10	Standard Comb	5 Wells	5 Teeth	1 mm	13 mm	13 mm
SE211A-5-15	Standard Comb	5 Wells	5 Teeth	1.5 mm	13 mm	19.5 mm
SE211A-9-10	Standard Comb, w/ Microtiter Spacing	9 Wells	9 Teeth	1 mm	5.8 mm	5.8 mm
SE211A-10-75	Standard Comb	10 Wells	10 Teeth	0.75 mm	4.8 mm	3.6 mm
SE211A-10-10	Standard Comb	10 Wells	10 Teeth	1 mm	4.8 mm	4.8 mm
SE211A-10-15	Standard Comb	10 Wells	10 Teeth	1.5 mm	4.8 mm	7.2 mm
SE211A-12-10	Standard Comb	12 Wells	12 Teeth	1 mm	4.75 mm	4.75 mm
SE211A-15-75	Standard Comb	15 Wells	15 Teeth	0.75 mm	2.9 mm	2.2 mm
SE211A-15-10	Standard Comb	15 Wells	15 Teeth	1 mm	2.9 mm	2.9 mm
SE211A-15-15	Standard Comb	15 Wells	15 Teeth	1.5 mm	2.9 mm	4.4 mm
SE211A-18-10	Standard Comb, w/ Microtiter Spacing	18 Wells	18 Teeth	1 mm	2.9 mm	2.9 mm
SE211A-R-75	Preparative Comb	1/1 Wells	1/1 Teeth	0.75 mm	68/5 mm	51/3.8 mm
SE211A-R-10	Preparative Comb	1/1 Wells	1/1 Teeth	1 mm	68/5 mm	68/5 mm
SE211A-R-15	Preparative Comb	1/1 Wells	1/1 Teeth	1.5 mm	68/5 mm	120/7.5 mm