Macro Volume Pipette Tips

• Improved accuracy over serological pipettes when measuring large volumes of solution
• Tip length facilitates access into bottles, cell culture flasks and tubes
• Free of detectable RNase, DNase, DNA, and PCR inhibitors. Sterile versions are also pyrogen free.

Direct Thermal Removable Tough-Tags® on a Roll

• Removable Tough-Tags are durable labels that cleanly remove from reusable surfaces.
• No Residue - Easily remove from surfaces without leaving adhesive. Track Samples - Use labels to follow samples from purification to processing

Resistant to most laboratory solvents, including short-term resistance to acetone and xylene. Great for beakers, bottles, flasks, glass vials, tubes, tube racks, pipettes. Available on rolls for handwriting or for direct thermal printing using the Dymo LabelWriter.

Proudly made in the USA! Click here for more made in America products!
   

Tough-Tags® on a Roll for Handwriting 

Removable Tough-Tags® are durable labels that cleanly remove from reusable surfaces.

Easily remove from surfaces without leaving adhesive. Use labels to follow samples from purification to processing. Resistant to most laboratory solvents, including short-term resistance to acetone and xylene. Great for beakers, bottles, flasks, glass vials, tubes, tube racks, pipettes. Available on rolls for handwriting or for direct thermal printing using the Dymo LabelWriter.

Proudly made in the USA! Click here for more made in America products!
 

Benchmark™ Homogenizer Bead Tubes

Prefilled, ready to use bead tubes. Nuclease and protease free.

Empty tubes available.

2.0 mL Tubes, Silica Beads (D1031-01, D1031-05, D1031-10)

2 mL tubes are prefilled with silica (glass) beads for bead homogenization. Beads are acid washed, and heat treated. Suitable for use in most bead homogenizers including the BeadBug 3, BeadBug 6 and BeadBlaster 24. 

2.0 mL Tubes, Zirconium Beads (D1032-01, D1032-05, D1032-10, D1032-15, D1032-30, D1032-SK)

2 mL tubes are prefilled with zirconium (ceramic) beads for bead homogenization. Beads are acid washed and heat treated. Tubes are filled in a process tested by qPCR to be free of stray DNA. Triple-Pure™ - High Impact. Suitable for use in most bead homogenizers including the BeadBug 3, BeadBug 6 and BeadBlaster 24.

5.0 mL Tubes, Zirconium Beads (D1034-30)

5 mL tubes are prefilled with 3 mm zirconium (ceramic) beads for bead homogenization. Beads are acid washed and heat treated. Tubes are filled in a process tested by qPCR to be free of stray DNA. Triple-Pure™ - High Impact. Suitable for use in BeadBlaster 24 with appropriate 5 mL tube holders.

* For use with D2400 BeadBlaster only 

2.0 mL Tubes, Garnet Shards and Zirconium Bead (D1033-30G)

2 mL tubes are prefilled with one large, banded 6 mm zirconium satellite and garnet shards. Beads are alcohol washed and heat treated. Sharp edges of the garnet shards make these beads useful for homogenization for tough samples such as skin and plant material. Suitable for use in most bead homogenizers including the BeadBug 3, BeadBug 6 and BeadBlaster 24.

2.0 mL Tubes, Stainless Steel Beads (D1033-28)

2 mL tubes are prefilled with 2.8 mm diameter stainless steel beads for bead homogenization. Beads are alcohol washed and heat treated. Suitable for use in most bead homogenizers including the BeadBug 3, BeadBug 6 and BeadBlaster 24.

5.0 mL Tubes, Stainless Steel Beads (D1034-28)

5 mL tubes are prefilled with 2.8 mm diameter stainless steel beads for use in bead homogenizers. Beads are alcohol washed and heat treated. Suitable for use in BeadBlaster 24 with appropriate 5 mL tube holders.

* For use with D2400 BeadBlaster only 

Specifications   
 

Bead Size	Application
0.1  mm	Gram positive and gram negative bacteria
0.5 mm	Bacteria, fungi, spores, molds and small yeasts
1.0 mm	Fungi, spores, algae and larger yeasts
1.5 mm	Soft tissue such as liver and small insects
2.8 mm	Tough, hard samples, muscle, plant materials, seeds and dried samples
3.0 mm	Variety of tissues including heart, lung, and brain, plant tissues, insects and dried samples
Garnet Shards	Tough samples such as skin and plant material

 

Proudly made in the USA! Click here for more made in America products! 
 

Vion Ultrapure ASTM Type I Water

Our ultrapure, ASTM Type I, water meets the strictest standards defined by the American Society for Testing and Materials (ASTM). It is ideal for a wide range of ultra-sensitive laboratory uses include gas chromatography, HPLC, mass spectrometry, atomic absorption spectroscopy, and trace analysis.

Specifications
 

Resistivity	≥ 18 MΩ
Conductivity	≤ 0.056 uS / cm
Total Organic Carbon (TOC)	≤ 50 ppb
Silicate (as SiO2)	≤ 3 ppb
Chloride (Cl)	≤ 1 ppb
Sodium (Na)	≤ 1 ppb
Endotoxin	≤ 0.03 EU / mL
Heterotrophic BacteriaCount (HBC)	≤ 10 CFU / L

 

Proudly made in the USA! Click here for more made in America products!
 

Vion ACS Reagent Grade Water

Vion ACS Reagent grade water is guaranteed to meet the purity standards set by the American Chemical Society (ACS). It is a high-quality, highly purified water with minimal contaminants, and is ideal for use in laboratory settings for sensitive chemical analyses, like liquid chromatography and UV-Visible spectrophotometry, and reactions where extreme purity is required.

Specifications
 

Conductivity	≤ 2.0 uS / cm
Silicate (as SiO2)	≤ 0.01 ppm
Heavy Metals (as Pb)	≤ 0.01 ppm
Substances Reducing Permanganate	Passes Test
Chloride (Cl)	≤ 0.4 ppm
Nitrate (NO3)	≤ 0.4 ppm
Phosphate (PO4)	≤ 1 ppm
Sulfate (SO4)	≤ 1 ppm
UV A300 nm	≤ 0.005
UV A254 nm	≤ 0.005
UV A210 nm	≤ 0.010
UV A200 nm	≤ 0.010
LC Absorbance	Passes Test
LC Gradient Elution	Passes Test

 

Proudly made in the USA! Click here for more made in America products!
 

Petri Dish Plate Stickers

PetriStickers allow for petri dishes to be labeled quickly, neatly and reliably. Made with water-resistant ink, substrate and adhesives and will remain firmly attached at temperatures from 42° to 4°C. Simply remove the label's protective backing and apply it to the back of a petri dish. After labeling, the dish can be held in a comfortable position for streaking or colony transfer, stored in an incubator or refrigerator, and photographed.

U of M: 36/pack

Formats: 32, 50, 70 & 100 Square Grids

Proudly made in the USA! Click here for more made in America products!
  

PetriSeal™ Sealing Film

PetriSeal™ stretches and conforms to form a tight seal and is temperature resistant, waterproof and chemically resistant. It resists abrasion and puncture and blocks vapor loss while reducing the rate of gas exchange. Use PetriSeal™ with microtiter plates, Petri dishes and culture plates to prevent to entry of contaminants. The seal remains flexible down to -30°C and can withstand continuous exposure from -40°C to +77°C (with intermittent exposure up to 100°C). Tests have shown that PetriSeal™ leaves no adhesive residue even after two years.

• Colors: Blue, Clear, Red, White & Yellow
• Tape Size: 0.50 In. x 108 Ft.

Specifications
 

Length	2,160 In. | 54864 mm
Width	0.50 In. | 12.7 mm
U of M	Roll

 

Proudly made in the USA! Click here for more made in America products!
   

Hoefer® Gradient Makers

Ideal for generating gradients of polyacrylamide, sucrose, and cesium chloride.

• Made of heavy acrylic plastic with high-quality, leak-free Teflon® valves
• Flat base provides stability on the magnetic stir. Comes with a support rod for attaching to a ring stand
• Takes Luer or 4 mm ID tubing. With included adapters, it can also take 2 mm ID or 22-gauge tubing

SG15, SG30, SG50 and SG100 include

• Gradient Maker with Teflon® Valves, 1/ea
• Adapter Barbed Fitting, 1/ea
• Luer Outlet Fitting, 1/ea
• 22-gauge Needle, 1/ea
• Support Rod, 1/ea 

The 500 mL SG500 Gradient Maker is made of two cylindrical acrylic chambers joined and mounted on a flat acrylic base.

• An easy-to-use push-pull valve opens and closes the passage between the reservoir and mixing chambers
• Suitable for forming polyacrylamide gradients or buffer gradients used with medium to small chromatography columns
• Ideal for use with the SE615 Multiple Gel Caster  

SG500 includes

• Gradient Maker with Push-Pull Valve, 1/ea
• Hose Clamps, 4/pk

Proudly made in the USA! Click here for more made in America products!
 

Hoefer® Gel Casters

Enable several gradient or homogeneous gels to be cast simultaneously. Choice of multiple-gel casters or dual-gel casters.

Gel Casters for Small Format Vertical Electrophoresis Systems (SE250, SE260, SE300)

Multiple-Gel Casters

• Pour uniform gels from the top; pump gradient gels into an inlet port at the bottom of the unit
• Sandwiches fill at the same time and at the same rate from the same solution
• The result: identical gels
• Glass plate sandwiches seal leak-free without the use of messy grease or tape
• Once cast, gels can be wrapped in plastic and refrigerated for several weeks

Dual-Gel Caster (SE245)

• Cast one or two gels
• Accommodates both 10 x 8 cm and 10 x 10.5 cm plates

*For use with the SE250 and SE260 Series only.
 

Gel Casters for SE600 and SE400 Series Vertical Units   

Multiple-Gel Casters

• SE675 casts up to four 16 cm long gels
• SE615 casts up to ten 16 cm long gels
• Easy to use and leak-free
• Cast homogeneous or gradient gels. Pour homogeneous gels directly into the top of the casting chamber: pump gradient gels through an inlet port at the bottom

Dual-Gel Caster (SE6015)

SE6015 Dual Gel Caster is included when you order an SE600 series unit. It can also be ordered separately.

• Casts two 8, 16, or 24 cm long gels at a time
• Double the capacity with optional divider plates
• Easy to use and leak-free
• Glass Sandwichers seal into the casting 

*For use with the SE600 Series only.

Proudly made in the USA! Click here for more made in America products!
 

PurePlus® Deep Well Plates

Labcon’s PurePlus® Deep Well Plates are rigorously tested to ensure they are free of RNase, DNase, ATP, and endotoxins. With our in-house microbiology lab, consistency is a top priority.

Available in sterile and non-sterile formats, these plates fit most popular instruments and can be sealed with sealing films or reusable silicone mats. Barcoding is available for both 1.2 mL and 2.2 mL plates by special order.

Ultra Clean & Ultra Clear 

PurePlus® plates feature molded-in orientation and permanent printed locating grids for ease of use. They are available in multiple formats: 96 well square hole with conical or flat bottom, 96 well round hole with round bottom, and 384 well square hole.

With volumes ranging from 0.2 mL to 2.5 mL, our plates are offered in non-sterile and validated medical-grade sterile versions, sterilized to an SAL of 10^-6 in compliance with ISO 11137.

The 1.2 mL and 2.2 mL volumes include three-sided alpha-numeric labeling grids, and their smooth interior surfaces ensure efficient pipetting. Designed for manual or robotic handling, these plates are SBS formatted for compatibility with automated systems.

Additional Features

Made from 100% virgin polypropylene, PurePlus® plates are autoclavable and freezable. Unlike "pre-sterile" products from other manufacturers, our sterile plates are fully validated for diagnostic and regulated procedures.

Specifications