Shaking Water Baths
 
Operating features

• +5°C above room temperature
• Microprocess PID control / automatic tuning / calibration
• Digital timer for delayed ON/OFF: 1 min to 99 hr 59 min
• Protection against over-temperature
• Digital LED display (0.1°C/ 1 rpm resolution)
• Splash-proof keypad
• Warranty: 18 months standard; 6 additional months upon receipt of warranty card

Constructional features

• Separate control keys for shaker mechanism allowing the unit also to be used as a constant temperature bath
  
• Minimal shock to the samples thanks to the shaker's gentle start feature
  
• Multiple LED displays for setting various values
  
• Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact
  
• Removable shaking carriage designed for external assembly avoiding direct contact with the bath fluid
  
• Minimization of the liquid loss and dripping of the bath liquid into the samples thanks to the included gable cover
  
• Included SUS 304 spring wire rack with double-two-tier providing various ways of glassware settings
  

 

Model		BS-06	BS-11	BS-21	BS-31
Bath Volume		17 L 0.6 Cu Ft	25 L 0.9 Cu Ft	37 L 1.3 Cu Ft	55 L 1.9 Cu Ft
Working Temperature Range		Ambient +5°C to 100°C | Ambient +9°F to 212°F
Temperature Stability*		± 0.2°C | ± 0.36°F
Shaking System	Motion / Speed Range	Reciprocating | 20 to 180 RPM
	Reciprocating Stroke Length	25, 30, 35 mm | 1.0, 1.2, 1.4 in. Available - Standard 30 / 12
Dimensions	Bath Opening / Depth  (W x L, D)	109 x 243, 235 mm  4.3 x 9.6, 9.3 in.	229 x 243, 235 mm 9.0 x 9.6, 9.3 in.	389 x 243, 235 mm 15.3 x 9.6, 9.3 in.	670 x 350, 235 mm 26.4 x 13.8, 9.3 in.
	Overall (W x L x H)	430 x 440 x 355 mm 16.9 x 17.3 x 14 in.	550 x 440 x 355  mm 21.7 x 17.3 x 14 in.	710 x 440 x 355 mm  28 x 17.3 x 14.3 in.	860 x 490 x 355 mm 33.9x19.3x14.0 in.
	Net Weight	26 kg 57 lbs	30 kg 66 lbs	35 kg 77 lbs	42 kg 93 lbs
Round Flask Maximum Mounting Amount in Spring Wire Rack	50 mL	5	16	22	38
	100 mL	3	9	15	22
	250 mL	2	5	8	14
	500 mL	2	4	6	8
	1 L	-	2	3	6
	2 L	-	1	2	3
Maximum Mountable Flask Clamps w/ Universal Platform	50 mL	9	12	20	32
	100 mL	3	9	15	24
	250 mL	2	4	8	12
	300 mL	2	4	8	12
	500 mL	2	4	6	12
	1 L	1	2	4	6
	2 L**	-	1	2	3
	2.8 L**	-	1	1	2
Electrical Requirements (230V,60Hz)***				8.9A	8.9A
Cat. No.				AAH44211K	AAH44311K
Electrical Requirements (230 V, 50 Hz)***				8.9 A	8.9 A
Cat. No.				AAH44212K	AAH44312K
Electrical Requirements (120 V, 60 Hz)		7.1 A	8.8 A
Cat. No.		AAH44063U	AAH44113U

* Technical data (according to DIN 12876)
** 2 and 2.8 L flasks must by opening the bath cover
*** BS-21,31 are provided ONLY for 230 voltage


Ordering Information

AAH44063U	BS-06 Shaking Water Bath with Spring Wire Rack, 17 L / 0.6 Cu Ft, 120 V
AAH44113U	BS-11 Shaking Water Bath with Spring Wire Rack, 25 L / 0.9 Cu Ft, 120 V
AAH44212K	BS-21 Shaking Water Bath with Spring Wire Rack, 37 L / 1.3 Cu Ft., 230 V/50 Hz
AAH44211K	BS-21 Shaking Water Bath with Spring Wire Rack, 37 L / 1.3 Cu Ft, 230 V/60 Hz
AAH44312K	BS-31 Shaking Water Bath with Spring Wire Rack, 55.52 L / 1.961 Cu Ft, 230 V/50 Hz
AAH44311K	BS-31 Shaking Water Bath with Spring Wire Rack, 55.52 L / 1.961 Cu Ft, 230 V/60 Hz
AAA44521	Universal Platform for BS-06 Shaking Water Bath
AAA44522	Universal Platform for BS-11 Shaking Water Bath
AAA44523	Universal Platform for BS-21 Shaking Water Bath
AAA44524	Universal Platform for BS-31 Shaking Water Bath

Operating features

• 5°C above room temperature to 150°C.
  
• Microprocessor PID control / Auto-tuning / Calibration.
  
• Digital timer : 1 min to 99 hr 59 min, delayed ON / OFF.
  
• Over-temperature limit and low fluid level protection.
  
• Conveniently preset 3 most commonly used temperature settings, without auto-tuning.
  
• Digital LED display (0.1°C resolution) with splash-proof keypads.
  
• RS-232 interface available.
• 18 months standard; 6 addiitionl months upon receipt of warranty card
  

  Constructional features

• Variable-speed pump for liquid viscosity for accurate, stable, and efficient temperature 
  management. (1 to 3 steps of pump for internal circulation / 4 and 5 steps for external circulation)
  
• Powerful pressure and suction pumps provide contrast pressure and flow rate throughout the 
  whole temperature range.
  
• Baffle plate screens circulating pump, heater and sensor to minimize shaking bath fluids and protect sample 
  and operators from direct contact.
  
• Dry-running protection; automated heating element cut-off and audible and visual warning.
  
• Seamless stainless steel tank with a reservoir drain that resists corrosion and make cleaning easy.
  
• Space saving design uses minimal bench space.

   

  Model   CW-10G CW-20G CW-30G Bath volume (L/cu ft)   10.0 / 0.4 20.0 / 0.7 30.0 / 1.1 Working Temperature Range2)(°C/°F)   Temperature Stability 1)(±°C/°F)   0.05 / 0.09 0.1 / 0.18 0.1 / 0.18 Pump Max. pressure, max. flow rate 5.9 PSI (406.8 millibar), 7.4 gallons/minute (28.0 liters/minute) Max. suction flow rate 2.6 gallons/minute (10.0 liters/minute) Dimensions Bath opening/ depth  (WxL, D) (mm/inch)   211x154, 180 / 8.3x6.1, 7.1 290x214, 200 / 11.4x8.4, 7.9 300x264, 230 / 11.8x10.4, 9.0 Overall  (WxLxH)(mm/inch)   281x450x444 / 11.1x17.7x17.5 360x510x464 / 14.2x20.1x18.3 370x560x494 / 14.6x22.0x19.4 Net weight(kg/lbs)   15.0 / 33.0 17.5 / 38.6 19.5 / 43.0 Electrical Requirements (230V, 60Hz)   50/60Hz, 6.7A 50/60Hz, 8.8A 50/60Hz, 8.8A Cat. No.   AAH52315K AAH52325K AAH52335K Electrical Requirements  (120V, 50Hz)   50/60Hz, 8.6A 50/60Hz, 8.6A 50/60Hz, 8.6A Cat. No.   AAH52316U AAH52326U AAH52336U

  1) If you operate the unit in 1 to 3 steps of pump, the temperature range can be from Amb. +5°C but in 4 and 
  5 steps, the range will be from Amb. +15°C.
  2) The heat-up time is measured on a 230V electrical condition with 1000W heater power.

   

Circulating Water Bath
 
SHEL LAB Circulating Water Baths are an excellent choice for research and quality control applications. They are highly accurate, easy-to-use, rugged and safe. Features include:

• Microprocessor Control
• Easy-To-Clean Polymer-Coated Tanks
• Air Jacket Heating Eliminates Hot Spots
• Recessed Heating Element Prevents Burnout
• 2 year limited warranty, excludes tank

The stainless steel cover is included with the purchase of this model. The use of covers is suggested since they allow maximum temperature range and help maintain better temperature uniformity.

Operating features

JULABO Refrigerated & Heating Circulators for heating and cooling are suitable for external temperature tasks and for temperature applications directly in the bath. A model from three different series' with different capacities can be selected. Powerful circulating pump systems and high heating and cooling capacities guarantee short heat-up and cool-down times. The inevitable dust accumulation that occurs in refrigeration systems is solved by means of an easily removed venting grill, which allows for easy cleaning. Depending on the model, the units are equipped with handles or castors for an easy transportation. All models have a drain tap on the front allowing the fluid to be drained easily. The compact assembly of each unit enables a space to be saved in the laboratory.

• Bright LED temperature display, resolution 0.1 °C
• Keypad for setpoint, switches automatically to the actual value
• PID1 temperature control
• Adjustable high temperature cut-out
• Low liquid level protection
• ATC 1-point calibration
• Timer function
  
  

  Technical Specifications

  Working temperature range -35  to 150 °C    Temperature control PID  Temperature stability ±0.03 °C Display LED     Display resolution 0.1 °C Integrated programmer not available  Heater capacity 1000 W (at 115V/60Hz)  Cooling capacity 20   0   -20   -30           °C 450   390   150   60           W Refrigerant R134a  Pump capacity Pressure:   5.08 psi    Flow rate: 15 lpm Bath opening / bath depth (W x L / D) 7.1 x 4.7 / 5.9 inches Filling volume 8 Liters Dimensions (W x L x H) 12.2 x 16.5 x 26 inches Weight 79 lbs Ambient temperature 5 to 40 °C Classification according to DIN 12876-1 3 (FL)