Home  >  Equipment  >  Baths
|◀ ◀ 13 - 24 of 32 ▶ ▶|
View:
115V

SB-12L Shaking Water Bath

  • Orbital shaking motion
  • Included spring platform accepts tubes, bottles, and flasks
  • Digital control of time, temperature, and speed
  • Compact design, conserves benchspace

The compact shaking water bath utilizes the well proven, belt-less motor drive system, with the addition of precision temperature control up to 80°C. The seamless, stainless steel chamber has a 12 liter capacity and includes a universal spring loaded platform for securing 15 and 50 mL test tubes, as well as Erlenmeyer flasks and media bottles up to 1 liter. A hinged and removable lid is also included to reduce energy waste, prevent splashing and divert condensation away from samples.


Easy to use controls allow the user to digitally select and monitor time, temperature, and shaking speed, while a constant monitoring system ensures accuracy over each parameter.
 
Specifications 

Temp. Range Ambient +5 to 80°C
Speed Range 30 to 200 rpm
Orbit 25mm/1 in.
Temp. Accuracy ±°0.3°C (at 37°C)
Temp Increments 0.1°C
Temp. Uniformity ±°0.2°C (at 37°C)
Capacity 12L
Dimensions (wxdxh) 31x34.5x30cm
Chamber Stainless Steel
Chamber Dimensions 13.5x24x14cm
Timer 1 min. to 48 hours, or continuous
Weight 15 lbs
Electrical 115V or 230V, 50-60Hz, 400W
Warranty 2 Years
Dimensions: (w x d x h) 12.2 x 13.5 x 12 in. /31 x 34.5 x 30 cm
Chamber: Stainless Steel
Chamber Dimensions: 12 x 9.5 x 6 in. / 30 x 24 x 15.25 cm.
Timer: 1 min. to 48 hours or continuous
Weight: 31 lbs / 14 kg

Item#:
ASB0012
17L, 120V, w/lid

SHEL LAB Reciprocating Water Baths deliver precise temperature control and a smooth reciprocal shaking motion. Temperature and oscillation controls feature an easy to read P.I.D. microprocessor temperature controller and an independent safety thermostat. 

The bath may be used with or without oscillation. Shaking speed is variable from 20 to 200 oscillations per minute, and the stroke length can be adjusted to three separate settings: 0.5, 1.0, or 1.5 inches to minimize the chance of accidental spillage. Also, the unique basket support system is designed to eliminate tank wear, yet still provide full support and free action for a heavily loaded basket. 

A durable finish on the housing prevents corrosion and chipping. In addition to a stainless steel tank, the bath platform tray is designed for optimum temperature uniformity. Maximum temperature is achieved using the stainless steel gable cover, which is designed to prevent condensate from dripping onto samples and assures uniform temperature conditions. These units feature:

  • Microprocessor Control
  • Independent Oscillation and Temperature Controls
  • Recessed Heating Element to Prevent Burnout
  • Adjustable Stroke Length
  • Great for heat inactivating FBS
  • 2 year limited warranty, excludes tank

Specifications:

WS17

WS27

Tank Capacity:

16L

27L

Temp Range:

Ambient +5°C - 90°C

Ambient +5°C - 90°C

Temp Uniformity:

±0.2°C at °C

±0.2°C at °C

Interior Dimensions
(WxDxH) inch.

14.7 x 11.7 x 7.5      

27 x 12 x 7.2

Exterior Dimensions
(WxDxH) inch.

25.5 x 15.5 x 12.5

37.5 x 14.8 x 12.5

Shaking Motion:

Reciprocal

Reciprocal

Shaking Speed:

20-200rpm

20-200rpm

Stroke Length (inch.)

0.5/1.0/1.5 (adj.)

0.5/1.0/1.5 (adj.)
Voltage
120V
120V

Weight:

57 lbs.

79 lbs.

WS17 and WS27Flask Clamp Capacities:

Item #

Description

Size

WS17

WS27

9530528

Flask Clamp

25ml

24

48

9530529

Flask Clamp

50ml

24

48

9530530

Flask Clamp

125ml

24

48

9530531

Flask Clamp

250ml

12

24

9530526

Flask Clamp

500ml

6

12

9530532

Flask Clamp

1000ml

4

8

9530551

Flask Clamp

2000ml

2

4

9530553

Flask Clamp

2800ml fernbach

1

3

9530554

Flask Clamp

4000ml

1

2

9530555

Flask Clamp

6000ml

1

2
Item#:
SWBR17
Your Price:
3666.77
Each

Digital Dry Baths

  • High-quality heating elements provide excellent temperature uniformity
  • Overheating alarm and automatic shut off feature
  • A wide variety of aluminum tube/plate blocks are available
  • Indicator light shows when the bath is >60°C
  • Programmable function allows for multiple temperature control points (For models DB-01A, DB-03A, and DB-04A)
  • Set to run continuously or set a timer up to 99 hours 59 minutes (For models DB-01A, DB-03A, and DB-04A) 

Digital Dry Baths are microprocessors controlled with an automatic PID temperature control program that provides an accurate and uniform temperature distribution across the thermal block. Digital Dry Baths are ideal for a wide variety of life science, clinical, and general chemistry applications. Features accurate and stable temperatures. The Multi-Block Dry Baths are used in various applications including enzyme reactions, inactivation of sera, Rh studies, blood cross-matching and cholesterol determinations.

 
Specifications: 

ModelDB-01ADB-02ADB-03A
Product NameProgrammable Dry BathDigital Dry Bath2-Block Dry Bath
Temperature RangeAmbient+5°C ~ 120°CAmbient+5°C ~ 120°CAmbient+5°C ~ 120°C
Temperature Accuracy±0.1°C±0.1°C±0.1°C
Temperature Stability@50~100°C: ≤±0.15°C
@100.1~120°C: ≤±0.2°C		@50~100°C: ≤±0.15°C
@100.1~120°C: ≤±0.2°C		@50~100°C: ≤±0.15°C
@100.1~120°C: ≤±0.2°C
Temperature Uniformity@37°C: ±0.3°C@37°C: ±0.3°C@37°C: ±0.5°C
Heat Up Time20°C to 120°C: ≤15 min20°C to 120°C: ≤15 min20°C to 120°C: ≤ 25 min
Timer0~99hr 59min or Continuous0~99hr 59min or Continuous0~99 hr 59 min or Continuous
Programmable6 Segments6 Segments6 Segments
Number of Block
Chambers		112
Block Chamber
Dimensions		118 x 78 x 31.5 mm
(4.6 x 3.1 x 1.2 in.)		118 x 78 x 31.5 mm
(4.6 x 3.1 x 1.2 in.)		118 x 78 x 40 mm
(4.6 x 3.1 x 1.6 in.)
Accessory Included
in Standard Packaging		1 x DBA05 Insulating Cover1 x DBA05 Insulating Cover2 x DBA05 Insulating Cover
Ambient Temperature5°C ~ 40°C5°C ~ 40°C5°C ~ 40°C
Ambient Relative Humidity≤85%≤85%≤85%
Power SupplyAC110V±11V, 60HzAC110V±11V, 60HzAC110V±11 V, 60 Hz
Max Power100W100W150 W
Dimensions (W x D x H)148 x 261 x 99 mm
(5.8 x 10.3 x 3.9 in.)		148 x 261 x 99 mm
(5.8 x 10.3 x 3.9 in.)		220 x 300 x 111 mm
(8.7 x 11.8 x 4.4 in.)
Net Weight1.2 kg (2.7 lb)1.2 kg (2.7 lb)3 kg (6.6 lb)
Protection LevelIP21IP21IP21
CertificationsCE, RoHS, WEEECE, RoHS, WEEECE, RoHS, WEEE
Item#:
ASDIGDRYBATH

Shaking Water Baths
 
Operating features

  • +5°C above room temperature
  • Microprocess PID control / automatic tuning / calibration
  • Digital timer for delayed ON/OFF: 1 min to 99 hr 59 min
  • Protection against over-temperature
  • Digital LED display (0.1°C/ 1 rpm resolution)
  • Splash-proof keypad
  • Warranty: 18 months standard; 6 additional months upon receipt of warranty card


Constructional features

  • Separate control keys for shaker mechanism allowing the unit also to be used as a constant temperature bath
  • Minimal shock to the samples thanks to the shaker's gentle start feature
  • Multiple LED displays for setting various values
  • Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact
  • Removable shaking carriage designed for external assembly avoiding direct contact with the bath fluid
  • Minimization of the liquid loss and dripping of the bath liquid into the samples thanks to the included gable cover
  • Included SUS 304 spring wire rack with double-two-tier providing various ways of glassware settings

     

Specifications

    Model

    BS-06

    BS-11

    BS-21

    BS-31

    Bath Volume

    17 L
    0.6 Cu Ft

    25 L
    0.9 Cu Ft

    37 L
    1.3 Cu Ft

    55 L
    1.9 Cu Ft

    Working Temperature Range

    Ambient +5°C to 100°C | Ambient +9°F to 212°F

    Temperature Stability*

    ± 0.2°C | ± 0.36°F

    Shaking System

    Motion /
    Speed Range

    Reciprocating | 20 to 180 RPM

    Reciprocating Stroke Length

    25, 30, 35 mm | 1.0, 1.2, 1.4 in. Available - Standard 30 / 12

    Dimensions

    Bath
    Opening / Depth 
    (W x L, D)

    109 x 243, 235 mm
     4.3 x 9.6, 9.3
    in. 

    229 x 243, 235
    mm
    9.0 x 9.6, 9.3
    in.

    389 x 243, 235 mm
    15.3 x 9.6, 9.3
    in.

    670 x 350, 235
    mm
    26.4 x 13.8, 9.3
    in.

    Overall
    (W x L x H)

    430 x 440 x 355 mm
    16.9 x 17.3 x 14
    in. 

    550 x 440 x 355 
    mm
    21.7 x 17.3 x 14
    in. 

    710 x 440 x 355
    mm 
    28 x 17.3 x 14.3
    in. 

    860 x 490 x 355
    mm
    33.9x19.3x14.0
    in. 

    Net Weight

    26 kg
    57 lbs

    30 kg
    66 lbs

    35 kg
    77 lbs

    42 kg
    93 lbs

    Round Flask Maximum Mounting Amount in Spring Wire Rack

    50 mL

    5

    16

    22

    38

    100 mL

    3

    9

    15

    22

    250 mL

    2

    5

    8

    14

    500 mL

    2

    4

    6

    8

    1 L

    -

    2

    3

    6

    2 L

    -

    1

    2

    3

    Maximum Mountable Flask Clamps w/ Universal Platform

    50 mL

    9

    12

    20

    32

    100 mL

    3

    9

    15

    24

    250 mL

    2

    4

    8

    12

    300 mL

    2

    4

    8

    12

    500 mL

    2

    4

    6

    12

    1 L

    1

    2

    4

    6

    2 L**

    -

    1

    2

    3

    2.8 L**

    -

    1

    1

    2

    Electrical Requirements (230V,60Hz)***

    8.9A

    8.9A

    Cat. No.

    AAH44211K

    AAH44311K

    Electrical Requirements
    (230 V, 50 Hz)***

    8.9 A

    8.9 A

    Cat. No.

    AAH44212K

    AAH44312K

    Electrical Requirements
    (120 V, 60 Hz)

    7.1 A

    8.8 A

    Cat. No.

    AAH44063U

    AAH44113U

    * Technical data (according to DIN 12876)
    ** 2 and 2.8 L flasks must by opening the bath cover
    *** BS-21,31 are provided ONLY for 230 voltage


    Ordering Information


    AAH44063U

    BS-06 Shaking Water Bath with Spring Wire Rack, 17 L / 0.6 Cu Ft, 120 V

    AAH44113U

    BS-11 Shaking Water Bath with Spring Wire Rack, 25 L / 0.9 Cu Ft, 120 V

    AAH44212K

    BS-21 Shaking Water Bath with Spring Wire Rack, 37 L / 1.3 Cu Ft., 230 V/50 Hz

    AAH44211K

    BS-21 Shaking Water Bath with Spring Wire Rack, 37 L / 1.3 Cu Ft, 230 V/60 Hz

    AAH44312K

    BS-31 Shaking Water Bath with Spring Wire Rack, 55.52 L / 1.961 Cu Ft, 230 V/50 Hz

    AAH44311K

    BS-31 Shaking Water Bath with Spring Wire Rack, 55.52 L / 1.961 Cu Ft, 230 V/60 Hz

    AAA44521

    Universal Platform for BS-06 Shaking Water Bath

    AAA44522

    Universal Platform for BS-11 Shaking Water Bath

    AAA44523

    Universal Platform for BS-21 Shaking Water Bath

    AAA44524

    Universal Platform for BS-31 Shaking Water Bath
Item#:
ASH2OBATHS1

Operating features

  •   -25°C to 150°C for RW-25G / -35°C to 150°C for RW-40G.

  •   Microprocessor PID control / Auto-tuning / Calibration.

  •   Digital timer : 1 min to 99 hr 59 min, delayed ON / OFF.

  •   Over-temperature limit and low fluid level protection.

  •   Conveniently preset 3most commonly used temperature settings.

  •   Digital LED display (0.1°C resolution) with splash-proof keypads. 

  •   RS-232 interface available.
  •   18 months standard warranty

    Constructional features
  •   Turbulence reduced five-speed duplex pump and built-in cooling coil let you use in an open or closed 
    bath environment (1 to 3 steps of pump for internal circulation / 4 and 5 steps for external circulation)

  •   Baffle plate screens circulator, heater, and sensor to minimize turbulence in the bath fluids and to protect 
    the samples and user from direct contact with the heating or cooling element.

  •   Dry-running protection; automated heating element cut-off and audible and visual warning. 

  •   Seamless stainless steel tank with a reservoir drain that resists corrosion and make cleaning easy.

  •   Use CFC-free refrigerant R-134A, R-404A and double service valve to prevent the leakage of refrigerant.


    Specifications


    Model

    RW-2025G

    Bath volume (L/cu ft)

    20.0 / 0.7

    Temperature Stability 1) (±°C/°F)

    0.05 / 0.09

    Cooling

    at -20°C (-4°F),W

    260

    capacity

    at 0°C (+32°F),W

    410

     

    at +20°C (+68°F),W

    560

     

    Refrigerator

    1/2 LBP, R-404A

    Pump

    Max. pressure,

    max. flow rate

    Max. suction flow rate3)

    Dimensions

    Bath opening/ depth 

    290x214, 200 

    (WxL, D)(mm/inch)

    / 11.4x8.4, 7.9

    Overall 

    380x560x825

    (WxLxH)(mm/inch)

    / 15.0x22.0x32.5

    Net weight(kg/lbs)

    60.0 / 132.2

    Electrical Requirements

    12.8A

    (230V, 60Hz)

    Cat. No.

    AAH57021K


    1) Technical data (according to DIN 12876)
    2) The cooling capacity is measured on a 230V/ 50Hz electrical condition. 
    3) The additional suction function is optional.


    Model

    RW-0540G

    RW-1040G

    RW-2040G

    RW-3040G

    Bath volume (L/cu ft)

    5.0 / 0.2

    10.0 / 0.4

    20.0 / 0.7

    30.0 / 1.1

    Working Temperature Rang2) (°C/°F)

    -35 to 150 / -31 to 302

    Temperature Stability 1) (±°C/°F)

    0.05 / 0.09

    0.05 / 0.09

    0.05 / 0.09

    0.08 / 0.14

    Cooling
    capacity

    at -20°C (-4°F),W

    80

    150

    400

    440

    at 0°C (+32°F),W

    150

    330

    660

    700

    at +20°C (+68°F),W

    280

    450

    800

    880

    Refrigerator

    1/2 LBP, R-404A

    1/2 LBP, R-404A

    3/4 LBP, R-404A

    1 LBP, R-404A

    Pump

    Max. pressure, 
    max. flow rate

    5.9 PSI (406.8 millibar), 7.4 gallons/minute (28.0 liters/minute)

    Max. suction flow rate3)

    2.6 gallons/minute (10.0 liters/minute)

    Dimensions

    Bath opening/ depth 
    (WxL, D) (mm/inch)

    150x99, 160
    / 5.9x3.9, 6.3

    211x154, 180
    / 8.3x6.1, 7.1

    290x214, 200
    / 11.4x8.4, 7.9

    300x264, 230
    / 11.8x10.4, 9.0

    Overall 
    (WxLxH) (mm/inch)

    302x438x690
    / 11.9x17.2x27.2

    360x490x780
    / 14.2x19.3x30.7

    380x560x825
    / 15.0x22.0x32.5

    440x620x895
    / 17.3x24.4x35.2

    Net weight (Kg/lbs)

    38.0 /83.8

    44.0 / 97.0

    60.0 / 132.2

    67.0 / 147.7

    Electrical Requirements
    (230V, 60Hz)

    8.5A

    10.7A

    13.8A

    14.8A

    Cat. No.

    AAH57101K

    AAH57111K

    AAH57121K

    AAH57131K

    Electrical Requirements 
    (230V, 50Hz)

    8.5A

    10.7A

    13.8A

    14.8A

    Cat. No.

    AAH57102K

    AAH57112K

    AAH57122K

    AAH57132K

    * RW-0540G, 1040G, 2040G, 3040G series are provided ONLY for 230 voltage.
    1) Technical data (according to DIN 12876)
    2) The cooling capacity is measured on a 230V/ 50Hz electrical condition. 
    3) The additional suction function is optional.

    • Item#:
    ASH2OBATHS4

    Operating features

    • 5°C above room temperature to 150°C.
    • Microprocessor PID control / Auto-tuning / Calibration.
    • Digital timer : 1 min to 99 hr 59 min, delayed ON / OFF.
    • Over-temperature limit and low fluid level protection.
    • Conveniently preset 3 most commonly used temperature settings, without auto-tuning.
    • Digital LED display (0.1°C resolution) with splash-proof keypads.
    • RS-232 interface available.
    • 18 months standard; 6 addiitionl months upon receipt of warranty card

      Constructional features

    • Variable-speed pump for liquid viscosity for accurate, stable, and efficient temperature 
      management. (1 to 3 steps of pump for internal circulation / 4 and 5 steps for external circulation)
    • Powerful pressure and suction pumps provide contrast pressure and flow rate throughout the 
      whole temperature range.
    • Baffle plate screens circulating pump, heater and sensor to minimize shaking bath fluids and protect sample 
      and operators from direct contact.
    • Dry-running protection; automated heating element cut-off and audible and visual warning.
    • Seamless stainless steel tank with a reservoir drain that resists corrosion and make cleaning easy.
    • Space saving design uses minimal bench space.

       

      Model   CW-10G CW-20G CW-30G
      Bath volume (L/cu ft)   10.0 / 0.4 20.0 / 0.7 30.0 / 1.1
      Working Temperature Range2)(°C/°F)  
      Temperature Stability 1)(±°C/°F)   0.05 / 0.09 0.1 / 0.18 0.1 / 0.18
      Pump Max. pressure,
      max. flow rate      		 5.9 PSI (406.8 millibar), 7.4 gallons/minute (28.0 liters/minute)
      Max. suction flow rate 2.6 gallons/minute (10.0 liters/minute)
      Dimensions Bath opening/ depth 
      (WxL, D) (mm/inch)      		   211x154, 180
      / 8.3x6.1, 7.1      		 290x214, 200
      / 11.4x8.4, 7.9      		 300x264, 230
      / 11.8x10.4, 9.0
      Overall 
      (WxLxH)(mm/inch)      		   281x450x444
      / 11.1x17.7x17.5      		 360x510x464
      / 14.2x20.1x18.3      		 370x560x494
      / 14.6x22.0x19.4
      Net weight(kg/lbs)   15.0 / 33.0 17.5 / 38.6 19.5 / 43.0
      Electrical Requirements
      (230V, 60Hz)      		   50/60Hz, 6.7A 50/60Hz, 8.8A 50/60Hz, 8.8A
      Cat. No.   AAH52315K AAH52325K AAH52335K
      Electrical Requirements 
      (120V, 50Hz)      		   50/60Hz, 8.6A 50/60Hz, 8.6A 50/60Hz, 8.6A
      Cat. No.   AAH52316U AAH52326U AAH52336U
      1) If you operate the unit in 1 to 3 steps of pump, the temperature range can be from Amb. +5°C but in 4 and 
      5 steps, the range will be from Amb. +15°C.
      2) The heat-up time is measured on a 230V electrical condition with 1000W heater power.

       

    Item#:
    ASH2OBATHS3

    Operating features for BW-B (Analog models)

    • +7°C above room temperature to 100°C
    • On /Off temperature control
    • Over-temperature limiter, alarm indicator.
    • Analog dialed indication with fine adjustment
    • 18 months standard; 6 addiitionl months upon receipt of warranty card

      Constructional features

    • Low-profile baths with front slope-panel controls provide an easier 
      access and makes it safer.
    • Additional inner circulating system by equipped agitator
      (BW-H series)
    • Dual bath models features individually programmable temperature 
      controller chambers. (BW-H series)
    • Various accessories gable and flat covers, test tube and spring wire 
      racks, half-shelf adjusters etc. (optional)
      * All accessories for dual baths (BW-H series) refer to BW-H/ B series 
      accessories options per each bath size. 
      (Ex. Each of gable covers for BW-0510H may be used to cover BW-05H / B and 
      the other cover for BW-10H / B)

      Model BW-05B BW-10B BW-20B
      Bath wolume (L/cu ft) 3.5 / 0.1 11.5 / 0.4 20.0 / 0.7
      Working Temperature Range
      (°C/°F)
      Amb. +7 to 100 / Amb. +12.6 to 212
      Temperature Stability(±°C/°F)
      0.5 / 0.9
      Dimensions Bath opening
      / depth 
      (WxL, D)
      (mm/inch)      		 240x136/ 115mm 300x240/ 165mm 498x300/ 165mm
      (9.4x5.4/ 4.5â) (11.8x9.5/ 6.5â) (19.6x11.8/ 6.5â)
      Overall/ 
      with gabel cover 
      (WxLxH, H)
      (mm/inch)      		 303x242x245/ 
      380mm      		 357x330x290/ 
      425mm      		 564x392x290/
      425mm
      (11.9x9.5x9.6/ 15.0â) (14.1x13.0x11.4/ 16.7â) (22.2x15.4x11.4/ 16.7â)
      Net weight
      (kg/lbs)      		 6.5kg (14.3lb) 10.0kg (22.0lb) 18.5kg (40.8lb)
      Electrical Requirements 
      (230V)      		 60Hz, 3.0A 50Hz, 3.0A 60Hz, 4.3A 50Hz, 4.3A 60Hz, 8.7A 50Hz, 8.7A
      Cat. No. AAH46011K AAH46012K AAH46021K AAH46022K AAH46031K AAH46032K
      Electrical Requirements 
      (120V)      		 60Hz, 5.8A 60Hz, 8.3A 60Hz, 8.3A
      Cat. No. AAH46013U AAH46023U AAH46033U
      1) Technical data (according to DIN 12876)
    Item#:
    ASH2OBATHS2

    SHEL LAB Digital Water Baths
    • Easy-to-Clean Stainless Steel Tank
    • Air Jacket Heating Eliminates Hot Spots
    • Recessed Heating Element Prevents Burnout
    • UL Listed
    • 2 year limited warranty, excludes tank


    SHEL LAB high-performance water baths are accurate, easy to use, safe and durable. The digital set / digital read P.I.D. temperature controller maximizes rapid heat-up without temperature overshoot. A microprocessor achieves precise temperature control regardless of how the unit is loaded. Calibration is performed directly from the front panel.
     

    This durable and dependable water bath comes with a variety of safety and convenience features. It has a unique lid design that allows condensation to drain back into the tank without spilling onto the work area. We have also incorporated a gasket around the water bath tank to prevent water from dripping onto the controls. A warm air jacketed design radiates heat to the sides and bottom of the tank, eliminating hot spots. The unit has a non-contact, recessed heating element that will prevent burnouts if the water level is too low.


    The water bath tank is constructed of stainless steel and does not have seams that could leak. The radius corners of the tank make cleaning easy. The unit's housings have a high quality textured powder coat finish. This electrostatically applied finish not only eliminates rust and chipping but is resistant to nicks, scratches and corrosives.


    SHEL LAB Digital Water Baths are durable, dependable and are available in four sizes (2, 7, 15, and 23 L), with a variety of safety and convenience features.


    Item#:
    ASH2OBATHS7

    Economy Digital Dual Heating Baths
     
    Operational Features of BW-H water baths

    • + 5° C above room temperature to 100° C
    • Microprocessor PID temperature control
    • Over-temperature protection with alarm
    • Digital LED displays of temperature readouts and set temperature values to .1° C or 1° C

    Constructional Features of BW-H water baths:

    • Low-profile design with sloped control panel for easier access and better safety
    • Additional inner circulation system using patented agitator
    • Individually programmable and temperature controllable dual reservoirs
    • Various accessories available to customize your needs-including gable and flat covers, test tube racks, spring wire racks, and half-shelf adjusters

    Specefications
     

    Model

    BW-0505H

    BW-0510H

    BW-1010H

    BW-1020H

    Bath Volume

    3.5 & 3.5 L 
    0.1 & 0.1 Cu Ft

    3.5 & 11.5 L
    0.1 & 0.4 Cu Ft

    11.5 & 11.5 L
    0.4 & 0.4 Cu Ft

    11.5 & 20 L
    0.4 & 0.7 Cu Ft

    Working Temp Range 

    Amb + 5° C to 100° C
     Amb + 9° F to 212° F

    Amb + 5° C to 100° C
    Amb + 9° F to 212° F

    Amb + 5° C to 100° C
    Amb + 9° F to 212° F

    Amb + 5° C to 100° C
    Amb + 9° F to 212° F

    Temperature Stability

    ± 0.1° C | ± 0.18° F

    ± 0.1° C | ± 0.18° F

    ± 0.1° C | ± 0.18° F

    ± 0.1° C | ± 0.18° F

    Bath Opening/Depth
    (W x L, D & W x L, D) 

    240 x 136, 150 mm
    9.4 x 5.4, 5.9 in.
    each chamber

    240 x 136, 150 mm
    & 300 x 240, 200 mm
    9.4 x 5.4, 5.9 in.
    & 11.8 X 9.5, 7.9 in

    300 x 240, 200 mm
    11.8 x 9.5, 7.9 in. 
    each chamber

    300 x 240, 200
    & 498 x 300, 200 mm
    11.8 x 9.5, 7.9 in.
    & 19.6 X 11.8, 7.9 in.

    Overall Dimensions (W x L x H)

    590 x 200 x 265 mm
    23.2 x 7.8 x 10.4 in.

    544 x 300 x 318 mm
    21.4 x 11.8 x 12.5 in.

    706 x 300 x 318 mm
    27.8 x 11.8 x 12.5 in.

    844 x 356 x 318 mm
    33.2 x 14.6 x 12.5 in.

    Net Weight

    9.7 kg | 21.3 lbs

    12.4 kg | 27.3 lbs

    14 kg | 30.8 lbs

    17.6 kg | 38.7 lbs

    Catalog Number

    AAH47113U

    AAH47123U

    AAH47133U

    AAH47143U
    Item#:
    ASH2OBATHS6

    Lab Armor | Peltier Bead Bath 7 L and 14 L

    • Acrylic Viewport to Monitor Samples without Opening Lid
    • Sealing Lid for Better Temperature Stability
    • Removable Aluminum Bead Baskets for Easy Handling
    • Peltier Thermoelectric Cooler-Heater (TEC-H) Device
    • Control Panel with Digital Temp Display
    • Robust All Steel Construction
    • 2 Year Limited Warranty

    Lab Armor revolutionizes the scientific bath industry with the Peltier Bead Bath!

    Utilizing Peltier Thermoelectric Cooler-Heater (TEC-H) technology, the Peltier Bead Bath is an all-in-one unit that efficiently controls the temperature in chilled and heated applications. The air jacketed design is exclusive to the Lab Armor Peltier Bead Bath, and it is the only bead bath on the market with both cooling and heating capabilities.

    The Peltier Bead Bath works with Beads to deliver exceptional temperature uniformity and securely hold lab vessels of various sizes in place. Samples may be conveniently transported using the removable Lab Armor Peltier Bead Baskets. The Bead Bath helps prevent the risk of sample contamination by removing water from many laboratory processes. These design

     

    Model Name [100-240 Volt]

    Peltier Bead Bath 7 L

    Peltier Bead Bath 14 L

    Ordering Number with Beads

    75409-707

    75409-714

    Ordering Number without Beads

    75400-707

    75400-714

    Capacity

    0.26 cu.ft. (7.4 liters)

    0.52 cu.ft. (14.8 liters)

    Dry Weight*

    46.6 lb (21.2 kg)

    80.8 lb (36.7 kg)

    Net Weight**

    69.0 lb (31.3 kg)

    125.6 lb (57.0 kg)

    Exterior Dimensions (W x D x H)

    16.1” x 22.1” x 12.1”

    408 x 562 x 308 mm

    30.4” x 24.2” x 12.2”

    772 x 615 x 310 mm

    Temperature Uniformity

    ±0.4°C at 4°C

    ±0.5°C at 37°C

    ±1.5°C at 70°C

    ±0.5°C at 4°C

    ±0.5°C at 37°C

    ±1.3°C at 70°C

    Temperature Range

    2°C - 70°C

    2°C - 70°C


    *Bath empty with no beads loaded.
    **Bath filled with beads.

    Item#:
    LABARMORPELTIER
     
    Peltier Bead Baths Brochure
    Peltier Bead Bath 7 L Spec Sheet
    Peltier Bead Bath 14 L Spec Sheet

    IsoBlock Dry Bath

    The new IsoBlock model from Benchmark contains two isolated block chambers. Each chamber is controlled independently, allowing the dry bath to serve as two dry baths in one. The hinged (and removable) lid is designed with a dividing wall; when the lid is closed, this dividing wall acts as a barrier, preventing air transfer between chambers. The control panel features large digital displays of both time and temperature. Any any point, either setting of a block can be adjusted, without affecting the settings of the other block.


    A wide variety of blocks are available for accommodating nearly all popular tube sizes. In addition, the unique Quick-Flip universal blocks accept tubes from .5 to 2 ml and with just a quick flip to the other side, accommodate .2 ml tubes or PCR strips.


    Technical Specifications

    Temp Range

    Ambient + 5 to 105 °C

    Temperature Accuracy

    ±0.1%

    Temperature Increments

    0.1°C

    Temperature Uniformity

    ±0.2%

    Timer

    1 min to 99 hr & 59 min

    Dimensions

    6.3 X 14.5 X 5 in./ 16 X 36.5 X 13 cm

    Operating Temp Range

    +4 °C to 65 °C

    Electrical

    115V/230V, 50-60 Hz, 240W

    Warranty

    2 years
    Item#:
    ASIB6000

    JULABO Refrigerated & Heating Circulators for heating and cooling are suitable for external temperature tasks and for temperature applications directly in the bath. A model from three different series' with different capacities can be selected. Powerful circulating pump systems and high heating and cooling capacities guarantee short heat-up and cool-down times. The inevitable dust accumulation that occurs in refrigeration systems is solved by means of an easily removed venting grill, which allows for easy cleaning. Depending on the model, the units are equipped with handles or castors for an easy transportation. All models have a drain tap on the front allowing the fluid to be drained easily. The compact assembly of each unit enables a space to be saved in the laboratory.

    • Bright LED temperature display, resolution 0.1 °C
    • Keypad for setpoint, switches automatically to the actual value
    • PID1 temperature control
    • Adjustable high temperature cut-out
    • Low liquid level protection
    • ATC 1-point calibration
    • Timer function

      Technical Specifications

      Working temperature range

      -35  to 150 °C   

      Temperature control

      PID 

      Temperature stability

      ±0.03 °C

      Display

      LED    

      Display resolution

      0.1 °C

      Integrated programmer

      not available 

      Heater capacity

      1000 W (at 115V/60Hz) 

      Cooling capacity

      20

       

      0

       

      -20

       

      -30

       

       

       

       

       

      °C

      450

       

      390

       

      150

       

      60

       

       

       

       

       

      W

      Refrigerant

      R134a 

      Pump capacity

      Pressure:   5.08 psi   
      Flow rate: 15 lpm

      Bath opening / bath depth (W x L / D)

      7.1 x 4.7 / 5.9 inches

      Filling volume

      8 Liters

      Dimensions (W x L x H)

      12.2 x 16.5 x 26 inches

      Weight

      79 lbs

      Ambient temperature

      5 to 40 °C

      Classification according to DIN 12876-1

      3 (FL) 
    Item#:
    ASH2OBATHS12
    |◀ ◀ 13 - 24 of 32 ▶ ▶|
    View: