Hoefer® 0.5 to 2.0 mL Tri-Coded Cryo Tubes

• Manufactured in clean workshop complying with GMP 8 and certified with ISO 9001 and 13485
• Laser-etched code on the tube bottom and side, easy to read, scratch resistant
• Strict quality control, Tri-Coded system, to provide readability and uniqueness, and unequaled sample audit traceability
• Super-toughened materials with standing temperatures from -196°C to 120°C for various storage conditions
• RNase / DNase and pyogen-free, can be sterilized using gamma irradiation
• Same material for cap and tube, effectively prevents the uneven expansion during freeze-thaw cycles
• Direct code reading with the tubes on the rack. Rack is SBS format
• External thread tubes provide a larger working volume
• Multi-color caps offer 5 different options to facilitate research for different samples
• Non-silicone seal with unique thread to prevent over-tightening

Multi-color caps and racks for customization

• Caps Color: Red, Green, Blue, Orange, Transparent
• Tube Racks: White base, Black base 

Specifications
 

Tube Vol.	0.5 mL	1 mL	2.0 mL
Max. Working Vol.	0.58 mL	1.15 mL	2 mL
Tube Height	1.06 In. | 26.82 mm	1.83 In. | 46.59 mm	1.51 In. | 38.43 mm
Tube Height w/ Cap	1.16 In. | 29.58 mm	1.94 In. | 49.34 mm	1.70 In. | 43.12 mm
Inner Diameter	0.26 In. | 6.5 mm	0.26 In. | 6.5 mm	0.38 In. | 9.6 mm
Outer Diameter w/ Cap	0.34 In. | 8.7 mm	0.34 In. | 8.7 mm	0.50 In. | 12.8 mm
Center to Center	0.35 In. | 9 mm	0.35 In. | 9 mm	0.53 In. | 13.5 mm
Min. Temp.	-196 ºC (-320 ºF)	-196 ºC (-320 ºF)	-196 ºC (-320 ºF)
Format	96-format	96-format	48-format
2D-code on base	√	√	√
1D Linear Barcode on side	√	√	√
1D Linear Barcode on rack	√	√	√
Rack Dimensions (D x W x H)	5.04 x 3.34 x 1.42 In. 128 x 85 x 36 mm	5.04 x 3.34 x 2.13 In. 128 x 85 x 54 mm	5.04 x 3.34 x 1.89 In. 128 x 85 x 48 mm
Rack Weight	0.315 lb | 0.143 kg	0.445 lb | 0.202 kg	0.450 lb | 0.204 kg
Case Weight	3.46 lb | 1.57 kg	4.89 lb | 2.22 kg	5.00 lb | 2.27 kg

 

Hoefer® miniVE Vertical Protein Electrophoresis and Blotting System

The SE300 minVE is a sturdy, compact vertical protein electrophoresis unit that also performs electrotransfer (blotting). 

• Quick, excellent results using minimal buffer
• Passive cooling produces gels with straight lanes and sharp bands
• Cast your own or use precast gels from a variety of manufacturers
• Transfer up to 4 gels in 45 minutes with only 300 mL buffer using optional SE302 Blot Modules 
• Designed for use with a wide variety of precast gels

Hoefer® miniVE Complete Unit (SE300-10A-10)

• Lower Buffer Chamber (tank), 1/ea
• Gel Modules with Gaskets, 2 assemblies
• Safety Lid with High Voltage Leads, 1/ea
• Glass Plates, Rectangular, 10 x 10.5 cm, 3/pk
• Glass Plates, Notched, 10 x 10.5 cm, 3/pk
• Combs, 10-well, 1.0 mm thick, 2/pk
• T-Spacers, 1.0 mm thick, 4/pk
• Well-Locating Decals, 2/pk
• Wonder Wedge Plate Separation Tool, 1/ea
• Gel Seal, 1/ea

Hoefer® miniVE Basic Unit (SE300)

The same as above without the combs, spacers, and glass plates. For use with precast gels or order two SE211A combs, two sets of 10.5 cm long spacers, and 10 x 10.5 cm rectangular and notched glass plates separately.

Hoefer® miniVE Blot Module (SE302)

• Blot Module, 1/ea
• Blotter Paper, 25 sheets/pk
• Dacron Sponges, 6 mm thick, 4/pk

Specifications
 

Plate Size (W x H)	3.94 x 4.13 In or 3.94 x 3.15 In. | 10 x 10.5 cm or 10 x 8 cm
Spacers	0.75 mm, 1.0 mm, 1.5 mm
Max. Power	1000 V, 500 mA, 50 W
Max. Temp.	113ºF | 45°C
Indoor Use	39.2 to 104ºF | 4 to 40°C
Humidity	Up to 80%
Dims (D x W x H)	5.51 x 12.60 x 14.57 In. | 14 x 32 x 37 cm
Weight	4.85 In. | 2.20 kg

Hoefer® Chroma Deluxe Dual Cool Vertical Protein Electrophoresis System

Ergonomic design offers easier handling and sample introduction.

• Maximum glass plate size 18 x 16 cm
• Gels are fully submerged for greater temperature equilibration
• Produces straight lanes and sharp, well-defined bands
• Run up to four gels (maximum 112 samples) at one time under identical conditions
• Accommodates denaturing and native polyacrylamide gels, and the second dimension of 2-D electrophoresis
• Run gels at uniform temperature from 1 to 45°C
• A wide array of accessories enables you to tailor gel configurations to your needs 

Hoefer® Chroma Deluxe Complete Unit (SE600X-15-15)

• Lower Buffer Chamber, 1/ea
• Upper Buffer Chamber, 1/ea
• Safety Lid w/High Voltage Leads, 1/ea
• Heat Exchanger, 1/ea
• Glass Plates 18 x 16 cm, 6/pk
• Clamp Assemblies, 16 cm, 4/pk
• Cams, 6/pk
• Slotted Gaskets for Upper Buffer Chamber, 2/pk
• Dual Gel Casting Stand with Leveling Base, 1/ea
• Bubble Level, 1/ea
• Laminated Gaskets for Caster, 2/pk
• Buffer Dam, 1/ea
• Spacer-Mate Alignment Template, 1/ea
• Wonder Wedge Plate Separation Tool, 1/ea
• Gel Seal, 1/ea
• Combs, 15-well, 1.5 mm thick, 2/pk
• Spacers, 1.5 mm thick, 2 cm wide, 4pk

Hoefer® Chroma Deluxe Basic Unit (SE600X)

The same as above without the combs and spacers. Order two SE511 combs and two sets of 16 cm long spacers separately.

Specifications
 

Plate Size (W x H)	7.09 x 6.30, or 7.09 x 3.15 In. 18 x 16 or 18 x 8 cm
Spacers	0.75 mm, 1.0 mm, 1.5 mm
Max. Power	1000 V, 500 mA, 50 W
Max. Temp.	113ºF | 45°C
Indoor Use	39.2 to 104ºF | 4 to 40°C
Humidity	Up to 80%
Dims (D x W x H)	5.51 x 12.60 x 11.42 In. | 14 x 32 x 29 cm
Weight	16.98 lb | 7.70 kg

Hoefer® Standard Dual Cooled Vertical Protein Electrophoresis System

Standard vertical format for 18 cm long gels.

• Maximum glass plate size 18 x 16 cm
• Produce straight lanes and sharp, well-defined bands
• Run up to four gels (maximum 112 samples) at one time under identical conditions
• Run gels at uniform temperature from 1 to 45°C
• Accommodates denaturing and native polyacrylamide gels and 2-D electrophoresis
• A wide array of accessories allows you to tailor gel configurations to your needs 

Hoefer® Standard Complete Unit (SE600-15-15)

• Lower Buffer Chamber, 1/ea
• Upper Buffer Chamber, 1/ea
• Safety Lid w/High Voltage Leads, 1/ea
• Heat Exchanger, 1/ea
• Glass Plates 18 x 16 cm, 6/pk
• Clamp Assemblies, 16 cm, 4/pk
• Cams, 6/pk
• Slotted Gaskets for Upper Buffer Chamber, 2/pk
• Dual Gel Casting Stand with Leveling Base, 1/ea
• Bubble Level, 1/ea
• Laminated Gaskets for Caster, 2/pk
• Buffer Dam, 1/ea
• Spacer-Mate Alignment Template, 1/ea
• Wonder Wedge Plate Separation Tool, 1/ea
• Gel Seal, 1/ea
• Combs, 15-well, 1.5 mm thick, 2/pk
• Spacers, 1.5 mm thick, 2 cm wide, 4/pk

Hoefer® Standard Basic Unit (SE600)

The same as above without the combs and spacers. Order two SE511 combs and two sets of 16 cm long spacers separately.

Specifications
 

Plate Size (W x H)	7.09 x 6.30, or 7.09 x 3.15 In. 18 x 16 or 18 x 8 cm
Spacers	0.75 mm, 1.0 mm, 1.5 mm
Max. Power	1000 V, 500 mA, 50 W
Max. Temp.	113ºF | 45°C
Indoor Use	39.2 to 104ºF | 4 to 40°C
Humidity	Up to 80%
Dims (D x W x H)	5.51 x 12.60 x 11.42 In. | 14 x 32 x 29 cm
Weight	15.43 lb | 7.00 kg

Hoefer® Tall Standard Dual Cool Vertical Protein Electrophoresis System

Taller vertical format accommodates 24 cm long gels for increased resolution.

• Maximum glass plate size 18 x 24 cm
• Produce straight lanes and sharp, well-defined bands
• Run up to four gels (maximum 112 samples) at one time under identical conditions
• Run gels at uniform temperature from 1 to 45°C
• Accommodates denaturing and native polyacrylamide gels and 2-D electrophoresis
• A wide array of accessories allows you to tailor gel configurations to your needs  

Hoefer® Tall Standard Complete Unit (SE660-15-15)

• Lower Buffer Chamber, 1/ea
• Upper Buffer Chamber, 1/ea
• Safety Lid w/High Voltage Leads, 1/ea
• Heat Exchanger, 1/ea
• Glass Plates 18 x 24 cm, 6/pk
• Clamp Assemblies, 8 cm, 4/pk
• Clamp Assemblies, 16 cm, 4/pk
• Cams, 6/pk
• Slotted Gaskets for Upper Buffer Chamber, 2/pk
• Dual Gel Casting Stand with Leveling Base, 1/ea
• Bubble Level, 1/ea
• Laminated Gaskets for Caster, 2/pk
• Buffer Dam, 1/ea
• Spacer-Mate-Alignment Template, 1/ea
• Wonder Wedge™-Plate Separation Tool, 1/ea
• Gel Seal, 1/ea
• Combs, 15-well, 1.5 mm thick, 2/pk
• Spacers, 1.5 mm thick (2 cm wide), 4/pk
• Lower Buffer Chamber, 1/ea 

Hoefer® Tall Standard Basic Unit (SE660)

The same as above without the combs and spacers. Order two SE511 combs and two sets of 24 cm long spacers separately.

Specifications
 

Plate Size (W x H)	7.09 x 9.45, 7.09 x 6.30, or 7.09 x 3.15 In. 18 x 24, 18 x 16 or 18 x 8 cm
Spacers	0.75 mm, 1.0 mm, 1.5 mm
Max. Power	1000 V, 500 mA, 50 W
Max. Temp.	113ºF | 45°C
Indoor Use	39.2 to 104ºF | 4 to 40°C
Humidity	Up to 80%
Dims (D x W x H)	5.51 x 12.60 x 14.57 In. | 14 x 32 x 37 cm
Weight	19.40 lb | 8.80 kg

Hoefer® Smart TubeLaser

The Smart TubeLaser offers precise tube marking, replacing traditional labels with permanent laser etching that is resistant to fading and peeling. Its adaptable coding design allows for personalized customization, making it ideal for laboratory environments. By ensuring superior readability and traceability of your samples, the Smart TubeLaser significantly enhances both efficiency and safety in your lab.

• Laser Engraving: Utilizes advanced laser technology to deliver high-quality, precise markings.
• Customizable Content: Offers flexibility to engrave characters, numbers, letters, barcodes, QR codes, graphics, and more. 
• Permanent Marking: Provides scratch-resistant, low-temperature-resistant, and durable markings, eliminating the risks of peeling, damage, or loss.
• Desktop Design: Compact and highly integrated, making it ideal for small-scale cryovials and shipment vials in laboratory settings.
• Rapid Engraving: Capable of engraving 12 cryotubes in under 10 seconds. 
• Differentiated Information Etching: Supports the engraving of both individual and batch-specific information on cryotubes.
• Open Communication Interface: Integrates seamlessly with existing software systems and supports the import of external data.
• Compatibility: Fully compatible with Hoefer's extensive range of editable tubes in various 

Specifications
 

Dimensions (D x W x H)	16.54 x 13.39 x 24.41 In. 420  x  340 x 620 mm
Laser	Fiber Laser
Laser Wavelength	1064 nm
Nominal Avg. Output Power	20W
Positioning Speed	F=160 mm, ≤ 7000 mm / s
Focus Lens	F=160 mm Standard
Marking Area	110 x110 mm
Marking Line Width	0.06 mm (depending on material)
Min. Character Height	0.2 mm
Cooling System	Air Cooling
Power Supply	1KW/AC220V/50Hz, voltage fluctuation range ±5%; a stabilizer is required if the fluctuation exceeds this range.
Grounding	The grid ground wire complies with national standards
Ambient Temperature	0 ~ 40°C
Ambient Humidity	30% ≤ RH ≤ 85%
Vibration	Foundation amplitude less than 50 uM; vibration acceleration less than 0.05 g.
Dust	less than 0.20 mg / m3
Oil Mist	Not allowed
Condensation	Not allowed

 

Hoefer® Wide-Mini Vertical Protein Electrophoresis System

Extra wide format is ideal for quick, high-throughput runs. The SE640 is an extra wide vertical protein electrophoresis unit that accommodates up to 112 samples at one time.

• Maximum glass plate size 18 x 8 cm
• Permits rapid screening of up to 112 samples at one time
• Design permits gels to be surrounded uniformly by buffer so heat dissipation is efficient. 
• Bands are sharp and lanes are straight
• Accommodates denaturing or native polyacrylamide gels
• Run up to four second dimension gels using IEF strips or tube gels

Hoefer® Wide-Mini Complete Unit (SE640-15-15)

• Lower Buffer Chamber, 1/ea
• Upper Buffer Chamber, 1/ea
• Safety Lid with High Voltage Leads, 1/ea
• Glass Plates 18 x 8 cm, 6/pk
• 8 cm Clamp Assemblies, 4/pk
• Cams, 6/pk
• Dual Casting Stand with Leveling Base, 1/ea
• Laminated Gaskets for Casting Stand, 2/pk
• Slotted Gaskets for Upper Buffer Chamber, 2/pk
• Buffer Dam, 1/ea
• Spacer-Mate Alignment Template, 1/ea
• Wonder Wedge Plate Separation Tool, 1/ea
• Gel Seal, 1/ea
• Bubble Level, 1/ea
• Combs, 15-well, 1.5 mm thick, 2/pk
• 1.5 mm Thick Spacers, 2 cm wide, 4/pk

Hoefer® Wide-Mini Basic Unit (SE640)

The same as above without the combs and spacers. Order two SE511 combs and two sets of 8 cm long spacers separately.

Specifications
 

Plate Size (W x H)	7.09 x 3.15 In. | 18 x 8 cm
Spacers	0.75 mm, 1.0 mm, 1.5 mm
Max. Power	1000 V, 500 mA, and 50 W
Max. Temp.	113ºF | 45°C
Indoor Use	39.2 to 104ºF | 4 to 40°C
Humidity	Up to 80%
Dims (D x W x H)	5.51 x 12.60 x 11.42 In. | 14 x 32 x 29 cm

For a limited time, purchase any Hoefer® SE260 Mini Gel Unit,

(SE260-10A-10, SE260-10A-15, SE260-10A-75, or SE260B)

& get 5 Hoefer® Mighty Small Precast Gels FREE!

 

When ordering free product, use item number plus “-VF”.

 

Promo valid from 6/10/25 - 7/31/25.
Offer cannot be combined with other promotions, discounts, or institutional pricing. Not valid on prior purchases.
Special price applies only to the specified item; no substitutions.
Allterms and conditionsapply.

Hoefer® Mighty Small II Deluxe Mini Vertical Electrophoresis System

Combines the advantages of small format and efficient cooling for rapid screening of proteins and nucleic acids.

• Maximum glass plate size 10 x 10.5 cm
• Flexible design, additionally able to accommodate 10 x 8 cm format with optional accessories
• Supports a wide variety of precast gels
• Efficient active cooling ensures sharp bands
• Run up to four gels at one time under identical conditions
• Quick and easy to assemble
• Choose from a wide variety of accessories  

Hoefer® Mighty Small II Deluxe Complete Units (SE260-10A)

• Lower Buffer Chamber, 1/ea
• Upper Buffer Chamber/Cooling Core, 1/ea
• Safety Lid with High Voltage Leads, 1/ea
• Casting Cradle w/Sealing Gasket Set, 1/ea
• Casting Clamp Assemblies, 2/ea
• Cams, 4/ea
• Glass Plates, Rectangular, 10 x 10.5 cm, 10/ea
• Alumina Plates, Notched, 10 x 10.5 cm, 5/ea
• Spring Clamps, 4/ea
• Combs, 10 well, 2/ea
• T-Spacers, 4/ea
• Well Locating Decals, 2/ea
• Gel Seal, 1/ea

Hoefer® Mighty Small II Deluxe Basic Unit (SE260B)

The same as above without the combs, spacers, plates, and caster. For use with precast gels or order two SE211A combs, two sets of 10.5 cm long spacers, 10 x 10.5 cm rectangular glass and notched alumina plates, and a gel caster.

• Alumina Plates, Notched, 10 x 10.5 cm, 5/pk
• Spring Clamps, 4/pk
• Combs, 10 well, 2/pk
• T-Spacers, 4/pk
• Well Locating Decals, 2/pk
• Gel Seal/pk

Specifications
 

Plate Size (W x H)	3.34 x 4.14 or 3.34 x 3.15 In. | 10 x 10.5 cm or 10 x 8 cm
Spacers	0.75 mm, 1.0 mm, 1.5 mm
Max. Power	500 V, 500 mA, 12 W
Max. Temp.	113ºF | 45°C
Indoor Use	39.2 to 104ºC | 4 to 40°C
Humidity	Up to 80%
Dims (D x W x H)	6.30 x 6.50 x 7.08 In. | 16 x 16.5 x 18 cm
Weight	3.30 lb | 1.50 kg

Hoefer® Air-Cooled Vertical Electrophoresis System

Compact, rugged, and economical units ideal for educational laboratories with multiple users.

• Maximum glass plate size 18 x 16 cm
• Rugged injection molded construction is durable and assembles easily
• Run two gels with the addition of a divider plate
• Built-in casting stand seals leak free
• Choose from a wide variety of accessories
• Plates, clamps, spacers, and combs are interchangeable with the SE600 Series 

Hoefer® Air-Cooled Complete Unit (SE400-15-15)

• Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads, 1/ea
• Upper Buffer Chamber, 1/ea
• Safety Lid with Electrodes, 1/ea
• Glass Plates, 18 x 16 cm, 2/pk
• Clamp Assemblies, 16 cm, 2/pk
• Cams, 2/pk
• Slotted Gasket for Upper Buffer Chamber, 1/ea
• Bubble Level, 1/ea
• Laminated Gasket for Casting Stand, 1/ea
• Spacer-Mate-Alignment Template, 1/ea
• Wonder Wedge Plate Separation Tool, 1/ea
• Gel Seal, 1/ea
• Comb, 15-well, 1.5 mm thick, 1/ea
• Spacers, 1.5 mm thick, 2 cm wide, 2/pk 

Hoefer® Air-Cooled Basic Unit (SE400)

The same as above without the combs and spacers. Order one SE511 comb and one set of 16 cm long spacers separately.

Specifications
 

Plate Size (W x H)	7.09 x 6.30 In. | 18 x 16 cm
Spacers	0.75 mm, 1.0 mm, 1.5 mm
Max. Power	500 V, 60 mA, 20 W
Max. Temp.	113ºF | 45°C
Indoor Use	39.2 to 104ºF | 4 to 40°C
Humidity	Up to 80%
Dims (D x W x H)	5.91 x 9.45 x 11.02 In. | 15 x 24 x 28 cm
Weight	6.83 | 3.10 kg

Hoefer® Tall Air-Cool Vertical Electrophoresis System

Compact, rugged, and economical units ideal for educational laboratories with multiple users.

• Maximum glass plate size 18 x 24 cm
• Rugged injection molded construction is durable and assembles easily 
• Run two gels with the addition of a divider plate
• Built-in casting stand seals leak free
• Choose from a wide variety of accessories
• Plates, clamps, spacers, and combs are interchangeable with the SE600 Series 

Hoefer® Tall Air-Cool Complete Unit (SE410-15-15)

• Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads, 1/ea
• Upper Buffer Chamber, 1/ea
• Safety Lid with Electrodes, 1/ea
• Glass Plates, 18 x 24 cm, 2/pk
• Clamp Assemblies, 8 cm, 2/pk
• Clamp Assemblies, 16 cm, 2/pk
• Cams, 2/pk
• Slotted Gasket for Upper Buffer Chamber, 1/ea
• Bubble Level, 1/ea
• Laminated Gasket for Casting Stand, 1/ea
• Spacer-Mate Alignment Template, 1/ea
• Wonder Wedge-Plate Separation Tool, 1/ea
• Gel Seal, 1/ea
• Comb, 15-well, 1.5 mm thick, 1/ea
• Spacers, 1.5 mm thick, 2 cm wide, 2/pk 

Hoefer® Tall Air-Cool Basic Unit (SE410)

The same as above without the combs and spacers. Order one SE511 comb and one set of 24 cm long spacers separately.

Specifications
 

Plate Size (W x H)	7.09 x 9.45 In. | 18 x 24 cm
Spacers	0.75 mm, 1.0 mm, 1.5 mm
Max. Power	500 V, 60 mA, 20 W
Max. Temp.	113ºF | 45°C
Indoor Use	39.2 to 104ºF | 4 to 40°C
Humidity	Up to 80%
Dims (D x W x H)	5.91 x 9.45 x 14.19 In. | 15 x 24 x 36 cm
Weight	7.94 lb | 3.60 kg

Hoefer® Mighty Small II Mini Vertical Electrophoresis System

Designed for quick screening and rapid separation.

• Maximum glass plate size 10 x 8 cm
• Efficient active cooling ensures sharp bands
• Quick and easy to assemble
• Requires minimal buffer

Easily upgradable to the SE260 (with optional accessories), resulting in the additional capability of accommodating both 10 x 8 and 10 x 10.5 cm gels, enabling a wider variety of precast gel options.

Hoefer® Mighty Small II Complete Units (SE250-10A)

• Lower Buffer Chamber, 1/ea
• Upper Buffer Chamber with Cooling Core, 1/ea
• Safety Lid with High Voltage Leads, 1/ea
• Casting Cradle with Sealing Gasket Set, 1/ea
• Casting Clamp Assemblies, 2/ea
• Cams, 4/ea
• Glass Plates, Rectangular, 10 x 8 cm, 10/ea
• Alumina Plates, Notched, 10 x 8 cm, 2/ea
• Spring Clamps, 4/ea
• Combs, 10 well, 2/ea
• T-Spacers, 4/ea
• Well Locating Decals, 2/ea
• Gel Seal, 1/ea

Hoefer® Mighty Small II Basic Unit (SE250)

Specifications
 

Plate Size (W x H)	3.34 x 3.15 In. | 10 x 8 cm
Spacers	0.75 mm, 1.0 mm, 1.5 mm
Max. Power	500 V, 500 mA, 12 W
Max. Temp.	113ºF | 45°C
Indoor Use	39.2 to 104ºC | 4 to 40°C
Humidity	Up to 80%
Dims (D x W x H)	6.30 x 6.50 x 6.30 In. | 16 x 16.5 x 16 cm
Weight	3.30 lb | 1.50 kg

Hoefer® Mini Horizontal Agarose Electrophoresis System

Designed for very fast separations of DNA restriction fragments in agarose gels. To achieve passive cooling, you simply fill the clear molded base with 50% ethylene glycol coolant solution, seal it, and place it in a freezer or ice bath until ready to use.

• Fast separations - run a 7 x 10 cm gel in as little as 5 minutes
• UV-transparent running tray allows the user to image the gel without risk of damage due to handling
• Variety of comb sizes enables customization of sample throughput to fit your laboratory's requirements 
• Adjustable comb height offers complete control over well depth
• Gel Casting Kit Includes 7 x 10 cm Running Tray, 7 x 10 cm Casting Tray, and 4 Foam Gaskets

Complete Unit (HE33-8-15)

• Buffer Chamber Assembly, 1/ea
• Safety Lid with High Voltage Leads, 1/ea
• Running Tray, 1/ea
• Casting Tray, 1/ea
• Foam Gaskets, 4/pk
• Bubble Level, 1/ea
• 1.5 mm thick, 8-well comb, 1/ea
• Comb Back, 1/ea 

Basic Unit (HE33B)

The same as above, without the comb and comb back. Order separately.

Specifications
 

Gel Dims (W x L)	2.76 x 3.94 In. | 7 x 10 cm
Max. Buffer Vol.	250 mL
Max. Power	500 V for (5 min or less), 500 mA, 15 W
Max. Capacity	32 Samples
Max. Temp.	122ºF | 50°C
Indoor Use	39.2 to 104ºF | 4 to 40°C
Humidity	Up to 80%
Dims (D x W x H)	9.45 x 5.12 x 2.76 In. | 24 x 13 x 7 cm
Weight	1.76 lb | 0.80 kg