 S2K Commerce - Products Dropdown
				
 				S2K Commerce - Products Dropdown
			
			
			
				
				 S2K Commerce - Shopping Cart
				
 				S2K Commerce - Shopping Cart
			
			
			
				
				 S2K Commerce - Order Entry
				
 				S2K Commerce - Order Entry
			
			
			
				Undercounter BOD Refrigerated Incubators
| 
 | SRI6P | SRI3 | 
| Capacity | 6.5 cu.ft. (185 L) | 2.4 Cu.Ft. (68 L) | 
| Interior Dimensions WxDxH in. (cm) | 25.5 x 24 x 18.5 (64.7 x 60.9 x 46.9) | 16 x 12 x 21.5 (40.6 x 30.4 x 54.6) | 
| Exterior Dimensions WxDxH in. (cm) | 30 x 31.5 x 33.5 (76.2 x 80.1 x 85.1) | 24 x 21 x 33.8 (61 x 53.4 x 85.8) | 
| Temp Range | 15°C to 40°C (at 20°C ambient) | 0°C to 45°C (at 20°C ambient) | 
| Temperature Uniformity | +/- 0.5°C at 20°C | +/- 0.5°C at 20°C | 
| Electrical Specifications | 120 V or 220 V | 120 V or 220 V | 
| Capacity of Standard B.O.D. Bottles | 120 | 62 | 
| Temperature Control | 0.1°C Display Increments | 
 | 
| Shelving | 2 Supplied, Adjustable | 2 Supplied | 
| Interior Outlet | 110V-1 | 110V-1 | 
LI6P
- Microprocessor Control System
- P.I.D. Temperature Control
- LED Display of Set point and Chamber Temperature
- Interior Electrical Outlet
- Fan Assisted/Forced-Air Circulation
- TUV Certified
- 2-year Limited Warranty
Model LI6P B.O.D. Thermoelectric Cooled  Incubator, 6.5 cu.ft. (120 Bottle) Capacity. Using innovative thermoelectric  cooling technology, the LI6P eliminates the need for a refrigeration  compressor. This means that these units use 78% less power than alternative  models and reduce room air conditioning loads by 75%. They also include 75  pound capacity shelves, which eliminates sagging. These incubators meet APHA  specifications for Biochemical Oxygen Demand (BOD) and include a mechanical  convection system to ensure even air distribution, digital temperature set  controller, over temperature limit control, and a digital temperature display.
    
  A one amp interior outlet allows use of shakers, stirrers, roller bottles or  other apparatus. Units are supplied with adjustable leveling feet.
  
  Low Temperature Incubators are ideal for testing of sewage and wastewater, as  well as other low and room temperature applications.
LI5
- Microprocessor Control
- P.I.D. Temperature Control
- LED Display of Setpoint and Chamber Temperature
- High Limit Thermostat
- Interior Electrical Outlet
- Fan Assisted/Forced-Air Circulation
- Hermetically Sealed Compressor
- 2-year Limited Warranty
The LI5 space-saving low temperature incubator  is ideal for small Vol workloads and meets APHA specifications for  Biochemical Oxygen Demand (B.O.D.) analysis.
    
  Units are equipped with a hermetically-sealed compressor, a circuit breaker to  protect from electrical overload, and an easy-to-clean fully insulated chamber  that is corrosion-resistant. Gentle, continuous forced-air circulation ensures  temperature uniformity and reproducible test conditions. Each unit also  includes an independent over temperature safety controller, two shelves  (adjustable in two inch increments), and a one amp interior outlet to allow the  use of shakers, stirrers, roller bottles or other apparatus. This unit has a  steel exterior with welded seams and corners and a double-coated, baked enamel finish.  It is supplied with adjustable leveling feet and a condensation drip tray.
  
  Low Temperature Incubators are ideal for testing B.O.D. of sewage and waste  water, as well as other low and room temperature applications
PNUPREFIG
 
		 
					
				


 
				
			 
					
			 
							 
							