TPP Syringe Filters

Key Features:

• Designed for high flow rate of media or aqueous solutions
• 3 to 5 times faster than standard syringe filters
• Typical starting flow rate at 25°C for water at 2bar (~29psi) is 175mL/min
• 0.22µm or µm PES membrane
• Low protein binding
• Larger filter surface
• Low dead Vol Additional specifications
• Higher operating pressure
• Burst pressure 10bar (~145psi)
• Bubble point 3.7bar (~53psi)

• Standard luer-lock connection

• Housing diameter size 33 mm, Syringe filter rests perfectly on a 50mL centrifuge tube

• Gamma-sterilized, DNAse/RNAse-Free, and pyrogen-Free
• Individually wrapped in peel-off plastic wrapper in convenient card box dispenser

Typical applications:

Sterile filtration of protein solutions, tissue culture media, additives, buffers, and water.

Solutions can be filtered fast due to:

• Large filter surface area, that is increasing the flow rate and throuput
• High operating pressure: a maximum housing pressure of 10 bar (~145 psi).

Bi-directional
The syringe filter units bi-directional support of the filter membrane enables users to filter aqueous solutions in either direction (only ONE direction per use):

• Forward (from the syringe into the container)
• Backward (from the container into the syringe)

The filter unit removes micro organisms, particles, precipitates, and undissolved powders larger than 0.22 micron or 0.45 micron, depending on filter used.
 
Specifications: