For a limited time, purchase select Bullet Blender Gold+ or Storm Pro Models
(Item # BB24AUP and BT24M) at a Discount, plus get two packs of
RINO Bullet Blender Navy Bead Lysis kits FREE (50 kits/pk)!

(*Enter 2 Item # NAVYR1-RNA-VF to your cart for free bead kits)

 

Free offer with purchase of designated items at the listed price. Cannot be combined with any other discounts or pricing offers.
Not valid on prior purchases. Special price applies only to the specified item; no substitutions.
Promo valid until 12/31/2025 or while supplies last. All terms and conditions apply.

Bullet Blender® Gold+ Homogenizers
 

The Bullet Blender® Gold for tougher tissue/cell samples (mouse femur, tumor, and skin) now is dry ice compatible, eliminating sample heating during homogenization. All samples are automatically homogenized in the same manner, with high yields, so there is very little variation from sample to sample. There are no probes or blades to cause cross-contamination or sample loss, which also means there are no parts to clean between runs!

• Available with CE certification
• Made in the USA
• Can be used in temperatures ranging from 4°C to 40°C. Altitude: < 2000 m
• Storage Temperature: -40°C to 50°C

Bullet Blender® 50 Gold+ (BB50AUP)
 

Our largest dry-ice-cooled homogenizer. Can process tissue samples up to 3.5 g or cell culture combined with beads up to 20 mL. Process up to 4 tough tissue samples or up to 8 soft samples in 50 mL HIPPO™ tubes in parallel.

Includes

• Pack of 20, 50 mL HIPPO™ tubes
• 2 Packs of 4 sleeves (8 sleeves in total)
• Wholly scooper (to scoop dry pellets without the powder)
• 12V DC Wall Plug Power Cord
• Basic Starter Kit:
• Bead Sample Pack: 20 mL centrifuge tubes of 8 different types of beads
• 500 uL microspoon and 1.2 mL spoon

Bullet Blender® E5 Gold+ (BB5EAUP)
 

Homogenizer for tissue or cell cultures. Can process up to 12 samples in parallel, each sample up to 1 g each in a 5 mL GATOR™ tube or in *1.5 / 2 mL tubes using the tube adapters (purchased separately).

Includes

• Pre-filled 5 mL GATOR™ snap cap tubes with beads, 3 each (Pink, Red, Green, and Navy)
• 25 Pack of 5 mL GATOR™ snap cap tubes
• Wholly scooper (to scoop dry pellets without the powder)
• 24 V DC power supply
• Basic Starter Kit:
• Bead Sample Pack: 10 mL samples of 9 different bead types.

Bullet Blender® 24 Gold+ (BB24AUP)
 

Homogenizer for 24 0.3 g samples in microcentrifuge tubes with a very powerful motor. Used with 1.5 mL GATOR™ snap cap Tubes RINO™ screw cap tubes.
 

Includes

• Contact plate for use with GATOR™ Tubes
• 40 Pack of 1.5 mL GATOR™ snap cap Tubes
• Wholly scooper (to scoop dry ice pellets without the powder)
• 24 V DC power supply
• Basic Starter Kit:
• Bead Sample Pack: 5 mL samples of eight different bead types.
• Pre-filled 1.5 mL RINO® tubes with beads, 4 each (Pink, Red, Green, Navy)
• 50 Pack of 1.5 mL RINO® screw-cap tubes

For a limited time, purchase select Bullet Blender Gold+ or Storm Pro Models
(Item # BB24AUP and BT24M) at a Discount, plus get two packs of
RINO Bullet Blender Navy Bead Lysis kits FREE (50 kits/pk)!

(*Enter 2 Item # NAVYR1-RNA-VF to your cart for free bead kits)

 

Free offer with purchase of designated items at the listed price. Cannot be combined with any other discounts or pricing offers.
Not valid on prior purchases. Special price applies only to the specified item; no substitutions.
Promo valid until 12/31/2025 or while supplies last. All terms and conditions apply.

Bullet Blender® Pro Homogenizers
 

Homogenize your toughest samples (mouse femur, skin, tumor, etc.) in just minutes. Air cooling™ minimizes sample heat up. Updated touchscreens allow for easy use. CE certified.
 

Bullet Blender® 5E Pro (BT5E)
 

Our most powerful homogenizer! Process up to 12 samples at a time in 5 mL GATOR™ tubes and * 1.5 / 2 mL Tubes w/ adapter. Great for tough samples up to 1 g in size.

Includes

• 24 V 3.75 amp DC Power Supply (UL / CE)
• Power cord
• Basic Starter Kit:
• Bead Sample Pack: 10 mL samples of 9 different bead types
• 100 uL and 500 uL microspoons
• Pre-filled 5 mL GATOR™ snap cap tubes with beads, 3 each (Pink, Red, Green, Navy)
• 25 Pack of 5 mL GATOR™ snap cap tubes 

Bullet Blender® Storm Pro (BT24M)
 

Quickly homogenize up to 24 of your toughest samples. Uses 1.5 mL RINO® screw cap tubes or 1.5 mL GATOR™ snap cap tubes.

 Includes

• Contact plate for use with 1.5 mL GATOR™ snap cap tubes
• 40 Pack of 1.5 mL GATOR™ snap cap tubes
• 24 V 2.5 amp DC Power Supply (UL / CE)
• Power cord
• Basic Starter Kit:
• Bead Sample Pack: 5 mL samples of 8 different bead types
• 100 uL microspoon
• Pre-filled 1.5 mL RINO® tubes with beads, 4 each (Pink, Red, Green, Navy)
• 50 Pack of 1.5 mL RINO® screw cap tubes

Bullet Blender® Lite (BT12LT)
 

The all new Bullet Blender® Lite can homogenize up to 12 samples. Uses 1.5 mL GATOR™ snap cap tubes. Can accommodate 1.5 mL RINO® screw cap tubes *with the purchase of an adapter.

 Includes

• 24 V 2.5 amp DC Power Supply (UL / CE)
• Power cord
• Basic Starter Kit:
• Bead Sample Pack: 5 mL samples of 8 different bead types
• 100 uL microspoon
• Pre-filled 1.5 mL GATOR™ snap cap tubes with beads, 4 each (Pink, Red, Green, Navy)
• 40 Pack of 1.5 mL GATOR™ snap cap tubes

EXTENDED - BLACK FRIDAY SALE!

 

For a limited time, buy one BeadBug™ Microtube Homogenizer (D1030)
and get one FREE (D1030-VF)!

 

Add item at the listed price, and one “-VF” item to order free product.

Use promo code TURKEY25

 

Click here for more Black Friday Deals or

See flyer for more details.

 

Free offers require purchase of designated items at listed price. Offers expire 12/20/2025.
Not valid on previous purchases. Special price applies only to item specified. Other capacities or items cannot be substituted.
All terms and conditions apply.

BeadBug™ Microtube Homogenizer

• Powerful - for mixing, lysis, grinding or homogenization
• Individual homogenization tubes - avoids cross contamination between samples
• Multitask - homogenize 1-3 samples simultaneously

The BeadBug™ is a high energy benchtop homogenizer for individualized sample cell disruption to whole tissue homogenization. Simultaneous homogenization of up to 3 samples inside disposable 2 mL screw cap microtubes can be optimized for grinding for 3 seconds to 3 minutes. The mixing motion causes rapid disruption through constant high velocity impact from the hardened micro-beads chosen specifically for your sample type.

Developed for samples too tough to be homogenized in a common lab vortexer, the BeadBug™ provides a convenient and economical alternative to the traditional, over-priced homogenizers on the market today. With up to a 3 tube capacity and a tiny footprint of 7 x 8 in., the BeadBug™ is the ideal homogenizing instrument for low to medium throughput laboratories.

Specifications

For best results, use with the BeadBug™ pre-filled tube kits: Includes 2.0 mL Non-Skirt Screw Cap tubes with caps, sealing rings and DNase/RNase-free beads as specified below:
 

Homogenize, homogenization, lysis, bead beater, beadbeater, DNA extraction, sample grinder, bead, protein extraction, Bead Blaster, Beadblaster, Bead Bug, BeadBug, sample disruption, Precellys Evolution, Precellys 24, RNA extraction, tissue homogenizer, Bertin, Bead Ruptor, beadruptor, Fast Prep, FastPrep, MP Bio, bead mill, Power Lyzer, Powerlyzer, tissue lyzer, tissuelyzer, Bullet Blender, bulletblender, Next Advance, Disruptor Shaker, Digital Disruptor, disruptor, Triplepure, triple pure, speed mill, speedmill, biopulverizer, SoniBeast, Mini Beadbeater, SuperFastPrep, zirconium beads, glass beads, steel beads, homogenizer, homogenizer beads

Hermle Z216-MK Bundle with 44-Place 1.5/2.0 mL Rotor!
Bundle Includes: One Z216 MK refrigerated centrifuge, 115V and one 44 x 1.5/2.0 mL rotor.
 
Hermle Z216-MK Bundle with COMBI-Rotor 24 x 1.5/2.0 mL and 4 x PCR strips! 
Bundle Includes: One Z216 MK refrigerated centrifuge, 115V and one COMBI-Rotor 24 x 1.5/2.0 mL and 4 x PCR strips.
   

Free offer with purchase of designated items at listed price. Cannot be combined with other discounts or pricing.

Not valid on prior purchases. Special price applies only to the specified item; no substitutions.
Promo valid from 01/01/25 – 12/31/25. All terms and conditions apply.

See flyer for more details!

Z216-MK High-Speed Refrigerated Microcentrifuge

• 9 rotor options with a capacity of up to 44 x 1.5/2.0 mL

• High speed, 15,000 rpm/21,631 x g

• Powerful refrigeration, room temp. to 4°C in <10 min

• Accepts tubes from 0.2 mL to 5 mL

• 5 Year Warranty

Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory.

All common microtubes (0.2 mL, 0.5 mL, 1.5 mL, 2.0 mL) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0 mL centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy-to-use front panel can adjust accel/decel rates and change the end-of-run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5 mL dual-row rotor, nearly doubling the capacity when compared to traditional microcentrifuges.

In the Z216-MK model a powerful, compressor-driven cooling system maintains temperatures as low as -20°C and is designed to reach 4°C (from room temperature) in less than 10 minutes.

Specifications

Speed Range	200 to 15,000 rpm
Max. RCF	21,379 x g
Max. Capacity	44 x 1.5/2.0 mL
Temp. Range	-20°C to 40°C
Dimensions	11 x 21.6 x 11.4 in.
	27.9 x 54.9 x 29 cm.
Weight	77lbs (35kg)
Electrical	120V, 60Hz

Accessories & Parts

Item #	Description
Z216-2420S	COMBI-rotor™ w/ Quick-Seal™ Lid for 24 x 1.5/2.0 mL and 4 x PCR Strips (15,000 rpm/ 21,631 xg)
Z216-2420	Rotor, 24 x 1.5/2.0 mL w/ Quick-Seal™ Lid (15,000 rpm/ 21,379 xg)
Z216-2420H	Rotor, 24 x 1.5/2.0 mL w/ Hermetically Sealed Aluminum Lid (15,000 rpm/ 21,379 xg)
Z216-3020H	Rotor, 30 x 1.5/2.0 mL w/ Quick-Seal™ Lid (13,500 rpm/ 19,151 xg)
Z216-4420	Rotor, 44 x 1.5/2.0 mL w Quick-Seal™ Lid (15,000 rpm/ 21,379 xg)
Z216-24SC	Rotor, 24 x 1.8 mL Spin Column Kits w/ Quick-Seal™ Lid (13,500 rpm/ 17,317 xg)
Z216-3202	Rotor, 4 x PCR Strips (32 x 0.2 mL Tubes) (15,000 rpm/ 15,343 xg)
Z216-1205	Rotor, 12 x 5 mL Centrifuge Tubes (14,500 rpm/ 19,978 xg)
Z216-24HEM	Rotor, Hematocrit, 24 x Capillary (12,000 rpm/ 14,970 xg)

 
 

• Precision Control of Aspiration Needle Position
• Accurate to 0.1 mm
• Minimal residual liquid
• Auto rinse function eliminates cross contamination
• Up to 100 wash protocols can be customized and stored
• Liquid level sensors in wash and waste bottles
• Wash protocols can be transferred via flash drive

The SmartWasher™ 96 provides flexibility by accepting full plates, partial plates, and strips with U, V, C, or flat bottoms. Multiple aspiration point settings allow for minimal residual liquid in the wells after aspiration. All parameters, including dis­pense volume, suction time, soak and shake cycles, and shaking speed are easily programmed using the large 4.3" LCD display and keypad. Up to 100 wash protocols can be stored on board the SmartWasher™ 96 and recalled when needed or transferred between machines with a flash drive.

The washer comes with 2 wash bottles, 1 rinse bottle and a waste bottle. All have sensors that alert the user when the solutions are low, or in the case of the waste bottle, when it needs to be emptied. An auto-rinse function primes the dispensing tube and wash heads to prevent cross contamination and clogs.

8- and 12-channel wash heads are available separately to accommodate plates in either orientation. A transparent, acrylic shield surrounds the wash area, allowing for visualization of the plate. Should a spill or leak occur, the beveled spill well ensures that the liquid is extracted immediately to avoid cross-contamination.

The SmartWasher™ 96 is the perfect partner for the SmartReader™ 96 Microplate Absorbance Reader as well as other popular readers.

Specifications

• 4 x 250 mL swing out rotor capacity, up to 16 x 50 mL and 40 x 15 mL
  
• Advanced programming with auto-rotor recognition
• Optional high speed rotors, providing up to 24,000 xg
• Available with refrigeration
• 5 Year Warranty 

For applications requiring increased capacity over the Z306 or Z326 series centrifuges, the Z366 series offer a unique "Mid-Range" swing out rotor that accepts a variety of different tubes, including up to 16 x 50 mL or 40 x 15 mL. Despite this step up in capacity, the Z366 maintains a surprisingly compact design, with the standard air-cooled model featuring a footprint of 17 x 20 inches.

In addition to the popular 4 x 250 mL swing out rotor, a variety of additional rotors are also available. Angled rotors range from a 24 x 1.5ml micro rotor to a high capacity 6 x 250 mL rotor. A 2 x 3 microplate rotor is also available, as well as a 4 x PCR strips (8-strips) rotor.

Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.

Specifications

Limited Time Promo!

For a limited time, buy two Guardian™ 5000 Hotplate Stirrers (30981778)
and get one FREE (30981778-VF)!

 

Add items at the listed price, and one “-VF” item to order free product.

 

Free offers require purchase of designated items at listed price. Offers expire 12/31/2025. Not valid on previous purchases.
Special price applies only to item specified. Other capacities or items cannot be substituted.
All terms and conditions apply.

Guardian 5000™ Hotplates and Stirrers

Generation Guardian 5000™ Hotplate Stirrers are engineered for safety and versatility across research, academic, and industrial settings. They offer powerful heating and mixing, with premium hardware and software to support diverse users safely and reliably. Heating models reach up to 550 °C and feature 3 temperature control modes for quick heating or precise heating without overshoot. Select from 5 models with 3 plate sizes.

Main Attributes 

• Applications
• Temperature Sensitive Chemistry and Biology, Heat Fixation, Solution pH Optimization, Solution Sterilization, Endothermic Reactions, Denaturing of Organic Material, Sample and Solution Preparation, Dissolving Buffers and Reagents, Preparing Media, Boiling
• Display
• Backlit LCD display with white characters, integrated heating/stirring status indicators in green, and a prominent hot top indicator in yellow
• Operation
• 100-120 VAC or 220-240VAC 50/60Hz power entry, rotary switch knob(s) control
• Communication
• RS232 for data logging and remote control
• Construction
• Robust full metal housing, ceramic square top plate or ceramic-coated aluminum round top plate, high performance SmCo magnet
• Design Features
• Large dip angle front panel for easy monitoring from a distance, smooth enclosure surfaces for easy cleaning, audible alarm, IP32 protection, rapid install splashing shield (optional)

• HIGH CAPACITY 4 x 750 mL swing out rotor, 68 x 15 mL or 28 x 50 mL
• Ideal for Tissue Culture applications
• Advanced programming with automatic rotor recognition
• Available with refrigeration

The Z446 universal centrifuge series offers the highest capacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750 mL swing out rotor can withstand centrifugal forces upwards of 4,500 xg with full loads of up to 28 x 50 mL or 68 x 15 mL tubes.

Advanced microprocessor controls allow for instant rotor identification,which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display.

Specifications

LabValues 2025 Promo!

For a limited time, enjoy special pricing on the
Labnet AccuSeal™ Semi-Automated Plate Sealer! (PS1000)

 

See flyer for more details.

  

Offer cannot be combined with other discounts or institutional pricing.
Offer not valid on previous purchases. Promo valid from 7/15/25 to 12/31/25 or while supplies last.

All terms and conditions apply.

AccuSeal™ Semi-Automated Plate Sealer

AccuSeal™ Semi Automated Plate Sealers from MIDSCI are engineered and constructed by Labnet International, Inc to maximize PCR, assay, and storage applications with a user-friendly panel and automated sealing options.

Great emphasis has been placed on incorporating a wide range of standard heights to deep well microplates with appropriate adaptors to efficiently fit the plates for consistent temperature regulation. The AccuSeal™ sealer is optimized for simple digital control and operation, user-friendly versatility and convenience as well as safety.

Controls and Operation

• Intuitive layout permits optimal sealing time, temperature and settings
• Includes a "No Heat" setting for pressure sealing applications

Versatility and Convenience

• Adaptors specific for a PCR plate or an assay plate accommodate a variety of fits
• Automatically adjusts heat for different height plates
• Provides uniform pressure for a quality seal with a special non-stick coating to prevent messy cleanup.

Safety

• Motorized drawer features safety switches and prevents injury to the user.

Specifications
 

Dimensions	6.75 x 12.75 x 14.25 in.
Weight	24 Lbs
Sealing Temperature	OFF, 100 to 190 °C
Temperature Accuracy	+/- 1.00 °C
Temperature Uniformity	+/- 1.00 °C
Sealing Time	0.5 to 10 sec
Compatible Plate Materials	PP (Polypropylene) PS (Polystyrene) PE (Polyethylene)
Compatible Plate Types	Standard Assay Plates Deep-well Storage Plates PCR Plates: skirted, semi-skirted, non-skirted
Maximum Plate Height	45 mm
Compatible Sealing Film Types	Foil-polypropylene laminate Clear polyester-polypropylene laminate Clear polymer Thin clear polymer Foil-laminate Foil

Adapters 
 

PS1000-PCR	AccuSeal™ PCR plate adapter for sealing PCR and 384 well plates
PS1000-ADAPT	AccuSeal™ Assay plate adapter for sealing assay plates

Sealing Film

LabValues 2025 Promo!

For a limited time, enjoy special pricing on the Labnet Prism™ Mini Centrifuge!

 

See flyer for more details.

 

Offer cannot be combined with other discounts or institutional pricing.
Offer not valid on previous purchases. Promo valid from 7/15/25 to 12/31/25 or while supplies last.

All terms and conditions apply.

Labnet Prism™ Mini Centrifuge

Labnet's approach to provide innovative and feature-rich lab equipment is proven in the Prism™ Mini Centrifuge. Reliable and easy to use, the Prism™ Mini is compact and economical, allowing each workstation to be equipped with a personal centrifuge.

The Prism™ Mini Centrifuge can be used for a wide range of molecular biology separations and quick spins. The centrifuge was designed to be extremely compact with an exceptionally small footprint. It includes 2 quick-release interchangeable rotors, which spin up to 6000 rpms. An electronic brake provides quick deceleration, and the self-opening lid allows for easy sample access, both reducing handling time.

The Prism™ Mini Centrifuge's maintenance-free drive is remarkably quiet, and the unique design allows for excellent airflow to protect temperature-sensitive samples.

• New Rotor Design Increases Capacity
• Self-opening lid enables single-handed operation
• Quick-release rotor hub allows for easy rotor exchange
• Built-in braking system for rapid sample processing

Specifications
 

Capacity	8 x 1.5/2.0 mL tube rotor, 4 x 0.2 mL strips
Max. Speed	6000 RPM
Max. RCF	2000 x g
Dimensions	5.2 x 5.2 x 4.4 In. | 13.2 x 13.2 x 11.2 cm
Weight	1.2 lb | 55 kg
Electrical	230V, 50/60Hz