Shaker Orbit LS Low Speed

• Economical analog control with easy-turn knobs
• 19 mm orbit for blotting, gel staining and general mixing
• Streamlined design
• Safe for cold room and incubator use
• 1 Year Warranty

The Orbit LS low speed shaker is a high quality, general purpose shaker with economical analog control.

Styled after the other models in the line, the Orbit LS features a streamlined, compact design with easy-access control panel. Electronic controls are utilized for setting speed and time. The knobs used for selecting parameters turn easily and are clearly marked with corresponding values.

A large orbit and low speed make the Orbit LS useful for staining and destaining gels, washing blots and general mixing. The shaker is supplied with a 30 x 30 cm stainles steel flat platform and non-slip rubber mat to keep plates, dishes and other sample containers in place.

Speed range	3 - 60 rpm
Timer	20 - 120 min (10 min inc.) or continuous
Motion	Circular, 19 mm
Maximum load	11 lb/5 kg
Ambient operating range	+4° to 70°C
Dimensions (W x D x H)	10 x 12.6 x 6.3 in/ 25.5 x 32 x16 cm
Weight	14.5 lb/6.6 kg
Electrical	120V~, 60 Hz or 230V~, 50 Hz

Shaker Orbit 300 Digital

Time and speed are set and displayed digitally. Values are shown on the large, three digit LED. The broad speed range allows the Orbit 300 to be used for gentle mixing as well as vigorous agitation.

Specifications:
 

Speed range	100 - 1200rpm
Timer	0 to 99 minutes or continuous
Motion/orbit size	Horizontally circular, 3 mm
Maximum load	12.3 lb/5.6 kg
Ambient operating range	+4° to 65°C
Dimensions (W x D x H)	10.1 x 12.5 x 5 inches/ 25.6 x 31.7 x 12.7 cm
Weight	16 lb/7.3 kg
Electrical*	120V~, 60 Hz

 
Benchmark™ Orbi-Shaker™ CO2-MP
All Environment Shaker for Microplates

• Designed for use in CO₂ incubators and other extreme environments
• Remote controlled, adjust settings without exposing the chamber
• 3 mm orbit for thorough mixing of well plates
• Includes 6-position microplate platform

The Orbi-Shaker™ CO2-MP is designed for thorough mixing of microplates in extreme environments such as CO₂ incubators. It can withstand temperatures from 4° to 65°C and humidity levels up to 100%.

To extend the lifetime of the shaker, all the electronics are in a remote-control module that is placed outside the chamber. This has the added advantage of adjusting the shaker speed and time without opening the chamber door and disturbing the interior environment. The controller's thin, flat cord will not interfere with the door seal and the unit can magnetically mount to the outer housing of the incubator. A 6-position microplate platform is included and secures both standard or deep well plates.

Specifications
 

Speed Range	200 to 1200 rpm
Speed Increment	1 rpm
Orbit	3 mm
Timer	1 min. to 99 hr or continuous
Ambient Operating Temp.	+0°C to +65°C
Platform Size	13 x 12 in. | 33 x 30 cm
Load Capacity	6 x microplates
Dimensions	11.9 x 13.4 x 3.5 in. 30 x 34 x 9 cm
Weight	25 lbs (11.5kg)
Cord Length	60.5 in. | 154 cm
Electrical	115 or 230V 50-60Hz; 600W
Warranty	2 Years