Shaker Orbit 300 Digital

Time and speed are set and displayed digitally. Values are shown on the large, three digit LED. The broad speed range allows the Orbit 300 to be used for gentle mixing as well as vigorous agitation.

Specifications:
 

Speed range	100 - 1200rpm
Timer	0 to 99 minutes or continuous
Motion/orbit size	Horizontally circular, 3 mm
Maximum load	12.3 lb/5.6 kg
Ambient operating range	+4° to 65°C
Dimensions (W x D x H)	10.1 x 12.5 x 5 inches/ 25.6 x 31.7 x 12.7 cm
Weight	16 lb/7.3 kg
Electrical*	120V~, 60 Hz

 
Benchmark™ Orbi-Shaker™ CO2-MP
All Environment Shaker for Microplates

• Designed for use in CO₂ incubators and other extreme environments
• Remote controlled, adjust settings without exposing the chamber
• 3 mm orbit for thorough mixing of well plates
• Includes 6-position microplate platform

The Orbi-Shaker™ CO2-MP is designed for thorough mixing of microplates in extreme environments such as CO₂ incubators. It can withstand temperatures from 4° to 65°C and humidity levels up to 100%.

To extend the lifetime of the shaker, all the electronics are in a remote-control module that is placed outside the chamber. This has the added advantage of adjusting the shaker speed and time without opening the chamber door and disturbing the interior environment. The controller's thin, flat cord will not interfere with the door seal and the unit can magnetically mount to the outer housing of the incubator. A 6-position microplate platform is included and secures both standard or deep well plates.

Specifications
 

Speed Range	200 to 1200 rpm
Speed Increment	1 rpm
Orbit	3 mm
Timer	1 min. to 99 hr or continuous
Ambient Operating Temp.	+0°C to +65°C
Platform Size	13 x 12 in. | 33 x 30 cm
Load Capacity	6 x microplates
Dimensions	11.9 x 13.4 x 3.5 in. 30 x 34 x 9 cm
Weight	25 lbs (11.5kg)
Cord Length	60.5 in. | 154 cm
Electrical	115 or 230V 50-60Hz; 600W
Warranty	2 Years

 

• Shake and incubate samples simultaneously
• Complete with shaking racks for 15ml and 50ml conical tubes
• Intelligent, digital control
• Broad temperature and speed range

Designed for simultaneous heating and mixing of small samples, the VorTemp 1550 is supplied with interchangeable platforms for standard 15ml and 50ml conical tubes. Maximum capacity is 8 x 50mL or 18 x 15mL. Temperature in the VorTemp 1550 is adjustable over a broad range, making the unit useful for a variety of applications, including bacterial cultures and digestions. Mechanical convection provides a uniform and stable environment within the chamber. The VorTemp 1550 may also be used in the cold room for subambient applications.

Shaking speed as well as acceleration rates are adjustable. Acceleration can be set to three different levels to protect delicate samples.

A microprocessor controls all parameters including temperature and timed operation. Self-diagnostic software continuously monitors the unit for proper temperature and shaking speed, alerting the user to any errors. Heating and shaking are controlled by feedback loops which precisely maintain chosen parameters, independent of load or voltage fluctuations.

The sturdy construction of the VorTemp 1550 gives it stability during high speed shaking. The chamber is insulated to maintain temperature and reduce operating noise.

• Exclusive SmartChek temperature control system
• Stackable design saves space
• Full range of accessories available
• Internal electrical outlet


A small footprint, compact, stackable design and expanded temperature range make the 211DS incubators ideal for molecular biology and general use. Its integral orbital shaker makes it highly versatile.

MIDSCI's exclusive SmartChek temperature control system guarantees precise temperature control. Mechanical convection maintains a stable temperature environment and provides quick recovery after opening the door. A safety thermostat is located on the back of the unit. The insulated door has a large, double glass observation panel and opens nearly 180° for easy access.

Two full and one half shelf are supplied with each incubator. A flat platform and predrilled flask platform (clamps sold separately) are available for the 211DS.

Internal electrical outlet allows using small equipment such as GyroMini or Mini LabRoller Rotator inside the chamber of the 211DS. 

Benchtop Incubated Shakers

Performance

• Temperature range:
• Ambient +5°C to 80°C for IST-3075 / 4075.
• Ambient -15°C (Min. 15) to 80°C for IST-3075R / 4075R.
• Competitive high shaking speed up to 500 rpm.
• Orbital shaking motion in 19mm diameter.
• Microprocessor PID control.
• Three-point temperature calibration / Automatic tuning.
• Wide speed range even with heavy workload.
• Equipped with a maintenance-free BLDC motor to generate smooth, quiet, uniform, and yet powerful shaking motion.
• Best effort run function intelligently manages its rpm to keep shaking even workload is out of its capacity.
• Automatic shaking speed adjustment in case of excessive workload such as unbalanced load placement, unusual vibrations caused from unstable floor or external shock.
• Pleasant test environment by the smooth acceleration and deceleration control.
• Smooth start and smooth stop function prevents chemical spills from flasks or test tubes.
• High-velocity fan ensures uniform temperature distribution and rapid thermal recovery after door open.
• Air-tight silicone door seal to provide excellent temperature uniformity

Convenience

• Intuitive touch screen LCD controller with easy icons and logical menus.
• Easy-set digital timer for shaking operation. (1 min. to 999 hr. 59 min.)
• Wide sample monitoring and convenient sample loading.
• Convenient sample monitoring without affecting inside environment thanks to the three-side transparent acryl lid with bright LED lamps.
• Gas spring lid supports providing smooth motion, soft opening and closing.
• Repetitive task can be easily performed as the platform stops where it starts.
• Stopping the shaking platform always at the same position is highly beneficial for automated dosing or sampling process.
• Corrosion resistance stainless steel interior.
• Built-in RS-232 port and USB port for external control and data collection.

Safety

• Automatic run after power interruption.
• Temperature and shaking speed deviation alarm.
• Over-current protection, Stalled platform check.
• Mechanical over-temperature protection device.
• Environment-friendly CFC-free refrigerant. (for IST-3075R / 4075R)
• Audible and visible open-door alarms.



• ITEM NO.	AAH23465U	AAH23565U	AAH23665U	AAH23765U
  MODEL NO.	IST-3075	IST-3075R	IST-4075	IST-4075R
  Temperature Range	Amb. +5 to 80°C /	Amb. -15 (Min. 15) to 80 /	Amb. +5 to 80°C /	Amb. -15 (Min. 15) to 80 /
  	Amb. +9 to 176°F	Amb. -27 (Min. 27) to 176	Amb. +9 to 176°F	Amb. -27 (Min. 27) to 176
  Temp. Fluctuation at 37°C in flask	± 0.1°C / 0.18°F
  Temp. Variation at 37°C in flask	± 0.5°C / 0.90°F
  Refrigerator (Hp)	-	1 / 6 HBP	-	1 / 6 HBP
  Motion type	Orbital
  Amplitude size (dia.)	19.1mm / 0.75in
  Speed range (RPM)	20 to 500rpm
  Accuracy	±1% of set speed (>100rpm) / ±1 (100rpm)
  Timer	1 min. to 999 hr 59 min.
  Max. load	10kg / 22lbs at 500 rpm		14kg / 30.9lbs at 500 rpm
  	15kg / 33.1lbs at 400 rpm		21kg / 46.3lbs at 400 rpm
  Volume	53L / 1.9 CuFt		83L / 2.9 CuFt
  Platform (W×D)	350×350mm / 13.8×13.8in		450×450mm / 17.7×17.7in
  Interior (W×D×H)	410×410×320mm / 16.1×16.1×12.6in		510×510×320mm / 20.1×20.1×12.6in
  Exterior (W×D×H)	440x785x510mm / 17.3x30.9x20.1in		540x 890 x510mm / 21.3x35x20.1in
  Net weight	65kg / 143.3lbs	73kg / 160.9lbs	81kg / 178.6lbs	90kg / 198.4lbs
  Electrical requirements (120V)	60Hz, 7.5A	60Hz, 10.1A	60Hz, 7.5A	60Hz, 10.1A

• Exclusive SmartChek temperature control system
• Stackable design saves space
• Full range of accessories available
• Internal electrical outlet


A small footprint, compact, stackable design and expanded temperature range make the 211DS incubators ideal for molecular biology and general use. Its integral orbital shaker makes it highly versatile.

MIDSCI's exclusive SmartChek temperature control system guarantees precise temperature control. Mechanical convection maintains a stable temperature environment and provides quick recovery after opening the door. A safety thermostat is located on the back of the unit. The insulated door has a large, double glass observation panel and opens nearly 180° for easy access.

Two full and one half shelf are supplied with each incubator. A flat platform and predrilled flask platform (clamps sold separately) are available for the 211DS.

Internal electrical outlet allows using small equipment such as GyroMini or Mini LabRoller Rotator inside the chamber of the 211DS. 

Shaking features

• Select between orbital or reciprocating action.
  
• Speed range: 10 to 300 rpm.
  
• Programmable shaking motion.
  
• Run time: 10 sec to 999 hr 59 min 59 sec.
  
• Forward & Backward, Pause: 10 sec to 59 min 59 sec
  
• Maximum orbit size: 40mm dia. (1.6❠dia.)
  

  Operating features

• +5°C above room temperature to 60°C for SI-300, 600
  
• 15°C to 60°C for SI-300R, 600R
  
• Microprocess PID control/ Auto-tuning/ Calibration.
  
• Digital timer: 1 min to 99 hr 59 min, delayed ON/ OFF.
  
• Over-temperature limiter/ Door opening alarm.
  
• Digital LED display for temperature (0.1°C resolution), speed, and shaking motions.
  
• Preset 3 most commonly used temperature settings.
  
• 9 step temperature and up to 200 cycles of repetition programmable for each profile.
  
• Adjustable 3 step fan speed.
  
• RS-232 interface available.
  

  Constructional features

• Brushless DC motor for long maintenance-free use.
  
• High-velocity fans ensure rapid thermal recovery and excellent variation. 
  
• Gas spring door and lid guards against sudden closures.
  
• Acryl lid and inner lamp functions allow observation of flask contents. 
  
• Attached fluorescent lamp offered bright observation in a chamber. 
  
• Use CFC-free refrigerant (for SI-300R, 600R)

Specifications