IBI RT-PCR Certified and Nuclease-Free Water is ideal for all applications in a molecular biology lab including PCR, RT-PCR, restriction enzyme
assays, modifying enzyme assays, transfection, cloning, transformation, and all general molecular biology lab procedures.

IBI PCR Grade water is manufactured under stringent conditions. The purification process includes continuous deionization, reverse osmosis,
UV-treatment, 0.2µm filtration, followed by steam sterilization in an autoclave.

Vion Ultrapure ASTM Type I Water

Our ultrapure, ASTM Type I, water meets the strictest standards defined by the American Society for Testing and Materials (ASTM). It is ideal for a wide range of ultra-sensitive laboratory uses include gas chromatography, HPLC, mass spectrometry, atomic absorption spectroscopy, and trace analysis.

Specifications
 

Resistivity	≥ 18 MΩ
Conductivity	≤ 0.056 uS / cm
Total Organic Carbon (TOC)	≤ 50 ppb
Silicate (as SiO2)	≤ 3 ppb
Chloride (Cl)	≤ 1 ppb
Sodium (Na)	≤ 1 ppb
Endotoxin	≤ 0.03 EU / mL
Heterotrophic BacteriaCount (HBC)	≤ 10 CFU / L

 

Proudly made in the USA! Click here for more made in America products!
 

Vion ACS Reagent Grade Water

Vion ACS Reagent grade water is guaranteed to meet the purity standards set by the American Chemical Society (ACS). It is a high-quality, highly purified water with minimal contaminants, and is ideal for use in laboratory settings for sensitive chemical analyses, like liquid chromatography and UV-Visible spectrophotometry, and reactions where extreme purity is required.

Specifications
 

Conductivity	≤ 2.0 uS / cm
Silicate (as SiO2)	≤ 0.01 ppm
Heavy Metals (as Pb)	≤ 0.01 ppm
Substances Reducing Permanganate	Passes Test
Chloride (Cl)	≤ 0.4 ppm
Nitrate (NO3)	≤ 0.4 ppm
Phosphate (PO4)	≤ 1 ppm
Sulfate (SO4)	≤ 1 ppm
UV A300 nm	≤ 0.005
UV A254 nm	≤ 0.005
UV A210 nm	≤ 0.010
UV A200 nm	≤ 0.010
LC Absorbance	Passes Test
LC Gradient Elution	Passes Test

 

Proudly made in the USA! Click here for more made in America products!
 

Sodium Bicarbonate

• Appearance: White Crystalline Powder
• Purity: 99.0 - 100.5%
• pH (5% Aqueous): 7.9 - 8.4
• Water: ≤ 0.25%
• Lead: ≤ 5 ppm
• Arsenic: ≤ 2 ppm
• Chloride: ≤ 150 ppm
• Sulfate: ≤ 150 ppm
• RNase: None Detected
• DNase: None Detected

*Custom sizes available upon request.

DOT Information: Non-regulated.   
 

PR1MA™ Calcium Chloride Anhydrous

CAS Number: 10043-52-4
Molecular Weight: 110.98
Chemical Formula: CaCl₂
Solubility: Water
Storage Temp: Room Temperature

Research or further manufacturing use only, not for food or drug use.

• Appearance: White crystalline powder
• Assay (Titration): ≥ 96.0 %
• Titratable Base: ≤ 0.006 meq/g

IBI Cell Culture Grade, Pyrogen/Endotoxin Free Water is prepared for nuclear transfer, transfection, transformation, cell and tissue culture,
LAL testing, and all other aqueous solution preparations that require stringent quality control.

IBI Cell Culture Grade Water is tested for use in critical assays and applications. The water is endotoxin-free (to the maximum detection
limit of <0.005EU/ml by turbidimetric assay). The purification process of our Cell Culture Grade Water includes distillation, continuous
deionization, reverse osmosis, 0.1µm filtration, followed by steam sterilization in an autoclave.

• RNase & DNase Free Water A new process of purifying large quantity of DNase and RNase free water enables us to offer Molecular Grade Water at a price that any laboratory can afford. 
  
  
• No toxic agents such as DEPC are used in making the Molecular Grade Water; therefore, there is no chance of DEPC interfering with enzymatic reactions. 
  
  
• The Molecular Grade Water is suitable for use in molecular biology applications which demand a high quality of water and assurance that the water is free from DNase and RNase contamination. 
  
  
• Molecular Grade Water can be used for making reagents and rinsing glass/plastic wares for DNA and RNA research. 
  
  
• Each lot is quality tested for the absence of RNase and DNase contamination. Test reports are attached with each container as an added assurance.

Sucrose

• Appearance (Color): White
• Appearance (Form): Crystalline Powder
• Purity: ≥ 99.0%
• Identity (FTIR): Conforms to Structure
• Solubility (1M Aqueous): Clear and Colorless
• pH (1M Aqueous): 5.5 - 7.5
• Conductivity (1M Aqueous): ≤ 35 uS / cm
• Specific Rotation: 65.5° to 67.5°
• Water: ≤ 0.2%
• A260 (1M Aqueous): ≤ 0.09
• A280 (1M Aqueous): ≤ 0.07
• RNase: None Detected
• DNase: None Detected

*Custom sizes available upon request.

DOT Information: Non-regulated.

Sodium Sulfate

• Appearance: White Crystalline Powder
• Purity: ≥ 99.0%
• pH (5% Aqueous): 5.2 - 9.2
• Identification (FTIR): Conforms to Structure
• Water: ≤ 0.5%
• Insoluble Matter: ≤ 0.01%
• Loss on Ignition: ≤ 0.05%
• Chloride: ≤ 10 ppm
• Nitrogen: ≤ 5 ppm
• Phosphate: ≤ 10 ppm
• Lead: ≤ 5 ppm
• Iron: ≤ 10 ppm
• DNase: None Detected
• RNase: None Detected

*Custom sizes available upon request.

DOT Information: Non-regulated.   
 

PR1MA™ Acrylamide

CAS Number: 79-06-1
Molecular Weight: 71.1
Chemical Formula: C₃H₅NO
Solubility: Water
Storage Temp: Room Temperature

WARNING! This product can expose you to Acrylamide, a chemical which is known to the State of California to cause cancer, developmental and reproductive harm. For more information go to www.P65Warnings.ca.gov.

Research or further manufacturing use only, not for food or drug use.

• Appearance: White Crystalline Powder
• Acrylic Acid : ≤ 10 ppm
• Assay: ≥ 99.9 %
• Conductivity: ≤ 3.5 µmhos
• DNase, RNase, protease: Not Detected
• Electrophoresis: Pass Test
• Iron: ≤ 1 ppm
• Lead: ≤ 1 ppm
• Magnesium: ≤ 1 ppm
• Melting Point: 84.0 - 86.0 ^oC
• pH (10%, 0.1 M NaCl @ 25 ^oC) : 6.5 - 7.5
• Solubility (40% Aqueous Solution): Clear and colorless

IBI DEPC-Treated, Nuclease-Free Water is ideally suited for all applications in molecular biology lab including PCR, RT-PCR, restriction enzyme
assays, modifying enzyme assays, transfection, cloning, transformation, and specifically for all RNA assays.

IBI DEPC-Treated Water is manufactured under stringent conditions. The purification process for this product includes continuous
deionization, reverse osmosis, UV-treatment, 0.1µm filtration, followed by steam sterilization in an autoclave. The product is re-autoclaved
to ensure the breakdown of DEPC and release of carbon dioxide that may cause the pH to shift.

PR1MA™ X-GAL [5-Bromo-4-chloro-3-indolyl-β-D-galactoside]

Common Name: 5-Bromo-4-chloro-3-indolyl-β-D-galactoside
CAS Number: 7240-90-6
Molecular Weight: 408.6
Chemical Formula: C₁₄H₁₅BrCINO₆
Solubility: DMSO and DMF
Storage Temp: -20°C

Chromogenic substrate of β-Galactosidase used in combination with IPTG for detection of β-Galactosidase activity in bacterial colonies. X-GAL is cleaved at the B1-4 bond between galactose and the 5-Bromo-4-chloro-3-indolyl portion of X-GAL by β-Galactosidase via hydrolysis. The cleavage of X-GAL results in the production of a water insoluble blue dichloro-dibromo-indigo precipitate. In cloning strategies with vectors such as Lambda-11, M13mp18 and 19, pUC18 and 19, pUR222 the E. coli lacZ gene is transformed to lac+ cells. After transformation the cells show β-Galactosidase activity in the presence of media containing X-GAL and IPTG. The insertion of a DNA fragment into the cloning sites of the lacZ gene results in the disruption of β-Galactosidase activity leading to the appearance of white colonies. Non-recombinant cells produce a blue indigo dye.

Water Content: 0.05% (K. Fisher)
Protect from light and moisture

Research or further manufacturing use only, not for food or drug use.

• Appearance: White Powder
• Identity: Conforms to structure
• Purity (HPLC): ≥ 98.0 %
• Solubility (2%, DMF): Clear and Colorless Solution
• Specific Rotation: -63.0 - -60.0 °
• Water Content (K.F): ≤ 0.5 %