Order #	Capacity (Cu.Ft.)	Max Temp (°C)	Wattage	Amps	Inside Dimensions (in.) (WxHxD)	Outside Dimensions (in.) (WxHxD)	Shipping Weight (lbs.)
10AF	0.6	225	800	6.95	12x8.62x10	14x20.5x12	50
20AF	1.14	225	1000	8.69	13x11.625x13	15x24.5x15	66
30AF	1.83	225	1600	13.91	18x14.625x12	20x28.5x14	82
40AF	2.86	225	1600	13.91	18x19.625x14	20x33.5x16	112

Warranty: 18 months

Operational Features

• Microprocessor PID control
• Simple calibration and auto-tuning function
• Temperature control: 15°C above ambient to 250°C
• Delayed ON/OFF digital timer range: 1 min ~ 99 hr 59 min
• Intuitive and easy-to-operate control panel with bright LED display (1°C resolution) and touch-sensitive keypad
• High temperature limit setting and open door alert
• Convenient presetting function for 3 most commonly used temperature settings
• RS-232 interface

Constructional Features

• Gravity flow convection for uniform sample heating
• Fully insulated dual-wall door with 180 degree hinges and a pull-down handle
• Rounded inner chamber corners for easy cleaning and optimal airflow
• Corrosion-resistant incoloy sheath heating element and stainless steel interior
• Adjustable dual slide vents for controlling inner vapor circulation (diameter: 38mm/1.5")
• Threefold tempered-glass window providing clear inside view of the chambers (optional)

Model		ON-02G	ON-12G	ON-22G
Chamber Vol (L/cu ft)		52 / 1.8	91 / 3.2	135 / 4.8
Temperature	Range (°C/°F)	Amb. +15 to 250 / Amb. +27 to 482
	Fluctuation1)(±°C/°F)at 100°C	0.3 / 0.54
	Variation1)(±°C/°F)at 100°C	5.9 / 10.62	7.5 / 13.5	6.9 / 12.42
Dimension	Interior dimensions (W x D x H) (mm/inch)	400x360x365 / 15.7x14.2x14.4	480x410x465 / 18.9x16.1x18.3	610x460x485 / 24.0x18.0x19.0
	Exterior dimensions (W x D x H) (mm/inch)	577x542x760 / 22.7x21.3x30.0	657x592x870 / 25.9x23.3x34.3	785x642x897 / 30.9x25.3x35.3
	Net weight (Kg/lbs)	49 / 108	59 / 130	68 / 150
Electrical Requirements (230V)		50/60Hz, 4.3A	50/60Hz, 6.0A	50/60Hz, 7.4A
Cat. No.		AAH11135K	AAH11145K	AAH11155K
Electrical Requirements (120V)		50/60Hz, 6.7A	50/60Hz, 8.3A	50/60Hz, 10.0A
Cat. No.		AAH11136U	AAH11146U	AAH11156U

1) Technical data (according to DIN 12880)

Economy Natural Convection Ovens

The cost-effective choice for general-purpose heating applications. Includes two stainless steel wire shelves and power cord.These ovens are ideal for general chemical and biological laboratory heating, sterilizing, baking, and drying of lightweight samples such as plant tissue, textiles, papers, and powders that require a gentle airflow. The corrosion-resistant Incoloy® sheath heating element and stainless steel chamber offer durability and chemical resistance. Units feature digital LED display and touch-sensitive keypad. 

Specifications: 
 
Min Temperature (° F): 59

FD Series Standard Features:

• Temp Range: room temperature plus 5 °C to 300 °C
• APT.line preheating chamber technology
• Forced convection
• Adjustable exhaust air flap
• Controller with timer functions
• 2 chrome-plated racks
• Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
• Other voltages available upon request.

 FED Series Standard Features:

• Adjustable fan speed
• Controller with LCD display (Avantgarde.Line) with enhanced timer functions
• Electromechanical control of the exhaust air flap
• 2 chrome-plated racks
• Class 2 integrated independent adjustable temperature
• Safety device (DIN 12880) with visual alarm
• USB port for recording data
• Other voltages available upon request.

 

Technical Data of the Series FD and FED
Description	FD 23	FD 56	FD 115	FED 56	FED 115
Basic data
Housing dimensions not incl. fttings and connections	20	60	115	60	116
W x H x D [mm]	435 x 495 x 520	560 x 625 x 565	710 x 735 x 605	560 x 625 x 565	710 x 735 x 605
Interiors dimensions W x H x D [mm]	222 x 330 x 300	400 x 440 x 345	550 x 550 x 385	400 x 440 x 345	550 x 550 x 385
Performance Data Temperature
Temp Range ... [°C] above ambient temperature to [°C]	300	300	300	300	300
Temperature uniformity at 150 °C [± K]	2.5	1.7	1.7	1.4	1.2
Temperature fluctuation at 150 °C [± K]	0.3	0.3	0.3	0.3	0.3
Heating-up time to 150 °C [min]	25	15	20	15	20
Recovery time after 30 seconds door open at 150 °C [min]	6	5	5	5	5
Energy consumption at 150 °C [Wh/h]		290	340	290	340

BENEFITS

• Uniform drying conditions thanks to APT.line technology
• Identical test conditions throughout the chamber interior independent of sample size and quantity
• Outstanding thermal insulation saves operation costs

IMPORTANT CHARACTERISTICS:

• Temp Range: room temperature plus 5 °C to 300 °C
• APT.line preheating chamber technology
• Free convection
• Adjustable exhaust air flap
• Controller with timer functions
• 2 chrome-plated racks
• Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
• Other voltages available upon request.

 

Technical Data of the Series ED	9010-0192	9010-0334	9010-0336
Description	ED 23	ED 56	ED 115
Basic data
Housing dimensions not incl. fttings and connections	20	57	114
W x H x D [mm]	435 x 495 x 520	560 x 625 x 565	710 x 735 x 605
Interiors dimensions W x H x D [mm]	222 x 330 x 300	360 x 420 x 380	510 x 530 x 425
Performance Data Temperature
Temp Range ... [°C] above ambient temperature to [°C]	300	15-300	8-300
Temperature uniformity at 150 °C [± K]	2.8	2.5	2.0
Temperature fluctuation at 150 °C [± K]	0.5	0.4	0.4
Heating-up time to 150 °C [min]	28	45	60
Recovery time after 30 seconds door open at 150 °C [min]	28	25	20
Energy consumption at 150 °C [Wh/h]		180	250

Operating features

• From +10°C above room temperature to 220°C
• Microprocess PID control / Auto-tuning/ Calibration
• Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF
• Over-temperature limiter / Door opening alarm
• Conveniently preset 3 most commonly used temperature settings without auto-tuning.
• Digital LED display (1°C resolution) with touch keypads
  

  Constructional features

• Circular fan assisted forced-air convection provides a high uniformed drying performance.
• Moderately sized, spacious, and an easy to grip circular door handle.
• Corrosion-resistant incoloy sheath heater and stainless steel chamber. 
• Two circular adjustable top slide vents helps to control inner air vapor circulation. (dia 38mm/ 1.5")
  
  

  Model OF-01E OF-11E OF-21E Chamber volume (L/cu ft) 52 / 1.8 100 / 3.5 150 / 5.3 Temperature Range (°C/°F) Amb. +10 to 220 / Amb. +18 to 428 Fluctuation1)(±°C/°F)at 100°C 0.4 / 0.72 Variation1)(±°C/°F)at 100°C 3.3 / 5.94 3.3 / 5.94 2.3 / 4.14 Dimension Interior dimensions (W x D x H) (mm/inch) 375x370x370 / 14.8x14.6x14.6 455x430x510 / 18.0x17.0x20 585x460x555 / 23.0x18.1x21.9 Exterior dimensions (W x D x H) (mm/inch) 530x535x737 / 20.9x21.1x29.0 610x595x877 / 24.0x23.4x34.5 740x625x922 / 29.1x24.6x36.3 Net weight(Kg/lbs) 36 / 79.4 47 / 103.6 59 / 130 Electrical Requirements (230V) 50/60Hz, 4.3A 50/60Hz, 6.0A 50/60Hz, 7.4A Cat. No. AAH14012K AAH14022K AAH14032K Electrical Requirements (120V) 50/60Hz, 6.8A 50/60Hz, 8.4A 50/60Hz, 10.1A Cat. No. AAH14016U AAH14026U AAH14036U

  1) Technical data (according to DIN 12880)

The CE Oven Series incorporates the Sure Load shelf system, triple wall construction, easy to read microprocessor controls. Adjust the air exhaust from the chamber without putting your fingers near the heat source. Even at temperatures of 225°C the outer skin of this unit meets all CE requirements, meaning your application will stay hot but your workspace will not. The CE series ovens are CE approved.

This gravity convection oven provides a degree of uniformity comparable to most forced air ovens on the market. The 99 min 59 hr digital timer has an independent control so its use is optional. Once the timer expires the power is cut to only the heating elements. The CE family is our lastest installment of a product of Constant Thinking.

These units include:

• Sure Load Shelf Design
• Non-Tip Shelves
• Microprocessor Controls
• Suberb Temperature Control
• Cool Touch Damper
• Digital Timer to 99hr and 59 min
• CE Approved
• Warranty: 2 years

Economy Gravity Convection Ovens

• Used for drying, baking, sterilizing, evaporating, heat treating, annealing and testing
• Quick run-up and recovery times
• Exterior has a hard, scratch-resistant hammer finish on a heavy steel double-wall construction
• Temperature is controlled by an automatic hydraulic or a bi-metal thermostat
• UL and CSA recognized
• Warranty: 18 months

Order #	Capacity (Cu. Ft.)	Max Temp (°C)	Wattage	Amps	Inside Dimensions (in.)(WxHxD)	Outside Dimensions (in.)(WxHxD)	Shipping Weight (lbs.)
10GC	0.7	225	600	5.22	12x10x10	14x17x12	44
20GC	1.27	225	800	6.95	13x13x13	15x21x15	61
30GC	2.0	225	1200	10.43	18x16x12	20x25x14	78
40GC	3.0	225	1600	13.91	18x21x14	20x30x16	94

The CE Oven Series incorporates the Sure Load shelf system, triple wall construction, and easy-to-read microprocessor controls. Users can adjust the air exhaust from the chamber without being near the the heat source. Even at operating temperatures of 225°C, the outer skin of this unit meets all CE requirements, so workspaces remain cool. 

The 99 hr 59 min digital timer has an independent control, so its use is optional. Once the timer expires, the heating elements turn off while the blower continues running to cool the samples inside the oven. 

Whatever the application, these forced air ovens deliver precise uniformity, air distribution and the peace of mind expected from the SHEL LAB brand. All of the SHEL LAB CE series ovens are CE approved. The CE family is our lastest installment of a product of Constant Thinking. 

These units include:

• Sure Load Shelf Design
• Non-Tip Shelves
• Microprocessor Controls
• Horizontal Air Flow
• Cool Touch Damper
• Digital Timer to 99hr and 59 min
• CE Approval
• Warranty: 2 years

Series FD-S Solid.Line | Drying and Heating Chambers with Forced Convection

Benefits

• Easy handling
• Accurate temperature control
• Simple and ergonomic door opening

Important characteristics

• Temperature range: ambient temperature +10°C to 250°C
• APT.line™ preheating chamber technology
• Forced convection
• Adjustable exhaust air flap
• Controller with timer function
• 1 chrome-plated rack, incl. shelf supports
• Class 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarm

The new products in the Solid.Line impress with their tried-and-tested BINDER quality and reliability. They are suited to drying and heating. The attributes of the Solid.Line are geared towards the application in question and therefore used in research and quality assurance.

Specifications

Item No.	9090-0019	9090-0025
Model	FD-S 56	FD-S 115
Housing Dimensions* (W x H x D)	24.19 x 24.63 x 22.73 in.	30.1 x 28.96 x 24.27 in.
Internal Dimension (W x H x D)	15.76 x 17.34 x 12.21 in.	21.67 x 21.67 x 13.79 in.
Net Weight	79 lbs	117 lbs
Interior Volume	1.9 Cu Ft	3.7 Cu Ft

*Housing dimensions do not include fittings and connections

Series ED-S Solid.Line | Drying and Heating Chambers with Gravity Convection

Benefits

• Easy handling
• Accurate temperature control
• Simple and ergonomic door opening

Important characteristics

• Temperature range: ambient temperature +7 °C to 250 °C
• APT.line™ preheating chamber technology
• Natural convection
• Adjustable exhaust air flap
• Controller with timer function
• 1 chrome-plated rack, incl. shelf supports
• Class 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarm

The new products in the Solid.Line impress with their tried-and-tested BINDER quality and reliability. They are suited to drying and heating. The attributes of the Solid.Line are geared towards the application in question and therefore used in research and quality assurance.

Specifications

Item No.	9090-0015	9090-0021
Model	ED-S 56	ED-S 115
Housing Dimensions* (W x H x D)	24.19 x 24.63 x 22.73 in.	30.1 x 28.96 x 24.27 in.
Internal Dimension (W x H x D)	15.76 x 17.34 x 13.79 in.	21.67 x 21.67 x 15.37 in.
Net Weight	79 lbs	117 lbs
Interior Volume	2.2 Cu Ft	4.2 Cu Ft

*Housing dimensions do not include fittings and connections