D1000 Handheld Homogenizer

• Homogenize most samples in under 30 seconds
• For volumes from 100 uL to 250 mL
• Supplied with both 5 mm & 7 mm generator probes

The D1000 is designed to rapidly homogenize, emulsify, suspend and disrupt biological samples. Ideal for use with microtubes, the homogenizer works well with samples from 0.1 mL to 250 mL (depending upon the generator probe used).

The D1000 is a rotor stator homogenizer, and works by drawing the sample, in liquid into the generator probe with the variable speed rotor, and then forcing it out through the slots in the stator. This achieves mechanical shearing of the sample. As the sample is repeatedly drawn up and forced through the stator, additional shearing takes place. Most samples are completely homogenized in 30 seconds or less. A powerful, 130 W motor drives the rotor at speeds from 8,500 to 30,000 rpm. Speed is adjustable in six steps to meet sample processing needs. A separate on/off switch allows the homogenizer to be left at the appropriate setting.

Generator probes are available in four sizes. The 5 mm and 7 mm diameter have a 50 mm length for use with samples in microtubes. The 10 mm x 115 mm is ideal for use with 15 and 50 mL tubes and 14 mm x 130 mm, for 50 mL tubes and vessels up to 250 mL. The unit is supplied with one each of the 5 mm and 7 mm generator probes. All the generator probes are made of stainless steel and can be sterilized by autoclaving.

Sepcificactions

  

Speed Range	8,500 to 30,000 rpm
Capacity	0.1 mL to 250 mL
Noise Level	< 70 db
Operating Temperature Range	4°C to 65°C
Dims w/o generator (D x W x H)	1.8 x 2.3 x 9 In. | 45.72 x 58.42 x 228.6 mm
Weight	1.35 lbs. | 0.6 kg.
Electrical	115 V (60 Hz) or 230 V (50 Hz)
Warranty	2-yr

 

D1000	D1000 Handheld Homogenizer, includes D1000-M5 & D1000-M7
D1000-M10	10 mm x 115 mm Saw Tooth Generator Probe (for 15 mL and 50 mL tubes)
D1000-M14	14 mm x 130 mm Saw Tooth Generator Probe (for 50 mL to 250 mL vessels)
D1000-M5	5 mm x 50 mm Flat Bottom Generator Probe, 5/pk (for microtubes)
D1000-M7	7 mm x 50 mm Saw Tooth Generator Probe, 5/pk (for microtubes)
D1000-ST	Stand for D1000 Handheld Homogenizer

PRO Scientific Bio-Gen PRO200 Homogenizer

 

The PRO Scientific Bio-Gen PRO200 Homogenizer is a compact, handheld solution for precise and efficient sample processing. Built with a lightweight ergonomic design and a 144-watt high-torque motor, this homogenizer delivers variable speeds from 5,000 to 35,000 rpm, making it ideal for tubes and small beakers. For continuous operation, it includes a separate on/off switch and can be mounted on an optional stand assembly (sold separately).

 

The PRO200 is ideal for cell disruption, tissue homogenization, liquid emulsions, and small solid sample processing. It can break down samples to nanoparticle levels as small as 1 micron, ensuring consistent results for research and laboratory applications. Built in the USA and backed by a 2-year warranty, the PRO200 combines durability, precision, and ease of use for everyday lab needs.

 

Main Attributes

• Compact, easy-to-use design for reliable sample preparation
• Variable speed control: 5,000 to 35,000 rpm
• Processes samples from 0.03 mL to 500 mL with consistency
• Handheld or stand-mounted operation
• Made in the USA
• 2-year warranty 

Generator Probes (sold separately)

Choose the right probe for your application. Standard quick-connect probes are crafted from 316 stainless steel and PTFE for durability. The flat-bottom probe is perfect for micro-tubes, while the saw-tooth probe provides high shear force for samples from micro-tubes to small beakers. For multiple sample processing, the Multi-Gen 7XL Probes offer cost-effective, repeatable homogenization without cross-contamination.

PRO Scientific Generator Probes

 

Stand Assembly (sold separately)

• Used for Bio-Gen PRO200 Homogenizer
• Great small footprint of 8 x 7 In.
• Includes Post, Cross Rod, Clamp, and Flat Base

* Sample piece size and quantity will affect breakdown. Sample solid piece size should not be larger than the diameter of the generator probe. For the most efficient homogenization of solids, the sample diameter of the largest solid should not be larger than the probe diameter.
 

Proudly made in the USA! Click here for more made in America products!
  

PRO Scientific PRO250 Homogenizer

 

The PRO Scientific PRO250 Homogenizer delivers powerful, durable performance for a wide range of sample sizes. Combining a lightweight, ergonomic design with a 3/4 HP, 576-watt motor, this homogenizer offers variable speeds from 5,000 to 30,000 rpm, making it ideal for both handheld and stand-mounted applications.

 

Main Attributes

• Processes samples from 0.05 mL to 5 L
• Variable speed control: 5,000 to 30,000 rpm
• Overload and overheat sensors for safety
• Compatible with 5 mm to 30 mm generator probes (sold separately)
• Handheld or stand-mounted operation
• Made in the USA
• 2-year warranty 

The PRO250 is perfect for cell disruption, tissue homogenization, liquid emulsions, and nanoparticle-level sample breakdown (as small as 1 micron). Built with precision in small-batch production and tested for quality, PRO homogenizers maintain a failure rate of less than 1%. For viscous samples, adding a Deflector Head to your probe improves sample movement and maximizes homogenization efficiency.

 

Generator Probes (sold separately)

Choose the right probe for your application. Standard quick-connect probes are crafted from 316 stainless steel and PTFE for durability. The flat-bottom probe is perfect for micro-tubes, while the saw-tooth probe provides high shear force for samples from micro-tubes to small beakers. For multiple sample processing, the Multi-Gen 7XL Probes offer cost-effective, repeatable homogenization without cross-contamination.
 
PRO Scientific Generator Probes 

Stand Assembly (sold separately)

• Used for Bio-Gen PRO250 Homogenizer
• Great small footprint of 9 x 7 In.
• Includes Post, Cross Rod, Clamp, and Flat Base 

Proudly made in the USA! Click here for more made in America products!
  

PRO Scientific Generator Probes for PRO Homogenizers

 

Get superior performance and durability with PRO Scientific Generator Probes, designed exclusively for PRO homogenizers. Crafted from high-quality 316 stainless steel, these probes ensure maximum chemical compatibility and precision processing for consistent results every time.

 

PRO Scientific probes feature a double-bearing system that eliminates bending and flexing during operation. Unlike other brands, the rotor shaft does not connect directly to the homogenizer’s drive shaft, a common weak point that causes premature wear and damage to both the probe and the homogenizer.

 

The PRO design ensures precise alignment, reduces wear on critical components, and delivers safer, more efficient homogenization. The rotor shaft connects securely to the motor drive shaft, allowing smooth, straight spinning and minimizing vibration for superior performance and longer product life.

 

Main Attributes

• Double Bearing Design for enhanced strength, stability, and longer lifespan
• Precision-crafted 316 stainless steel for durability and chemical resistance
• Made in the USA
• 2-Year Connection Warranty 

* Sample piece size and quantity will affect breakdown. Sample solid piece size should not be larger than the diameter of the generator probe.  For the most efficient homogenization of solids, the sample diameter of the largest solid should not be larger than the probe diameter.

 

*Multi-Gen Adapter (07-07200) is required for Multi-Gen 7XL Probes.
 

Proudly made in the USA! Click here for more made in America products!

Tissue-Tearor

• Use for mixing, emulsification, shredding, or chopping.
• Practical answer for small samples.
• Easy to hold and lightweight for one-hand operation. Can also be stand-mounted.
• Autoclavable stainless steel probes. Inert to aggressive solutions.
• All probes are interchangeable probes and are easily removed for cleanup.
• High-speed motor. Speed control from 5,000 to 35,000 rpm.
• 2-year warranty 

The Tissue-Tearor is a rotor/stator type tissue homogenizer that can rapidly homogenize, disperse, and emulsify samples in 0.2 - 1000 ml of liquid. During operation, the suspended material is drawn into the core of the homogenizer by a rotor turning at up to 35,000 rpm. The material is repeatedly cycled through six narrow slits in the stator where it is rapidly sheared and disintegrated by high-frequency mechanical action. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in ten to thirty seconds. Little, if any, heat is produced during the process. Unlike most other Brands of rotor/stator type homogenizers, the Tissue-Tearor comes complete - that is, with both a motor and a probe (aka, generator, dispersing tool) - both included in one price.

 

Specifications

• Sample Volume Range: 0.3 to 1000 ml, depending on the probe selected (see table below).
• Universal Motor: 120 VAC, 138 watts or, for overseas applications, 230VAC2
• Variable Speed: 5,000 to 35,000 rpm, incremented by 5000 rpm.
• Probes made of Type 316 Stainless Steel with fluorocarbon bushings.
• Weight: Approximately 1/2 Kg.

Item #	Practical Working Range	Probe Diameter	Working Probe Length
985370-04	0.5 - 5.0 mL	0.17 In. |4.5 mm	1.89 In. | 4.80 cm
985370-07	1 - 50 mL	0.28 In. | 7 mm	3.27 In. | 8.30 cm
985370-14	5 - 1000 mL	0.55 In. |14 mm	5.20 In. | 13.2 cm
985370-XL	1 - 50 mL (use w/ 50 mL tubes)	0.28 In. | 7 mm	4.29 In. | 10.9 cm

PRO Micro Homogenizer packages

The PRO200 homogenizer is ideal for microprocessing in 0.5 mL, 1.5 mL or 2.2 mL microtubes. With PRO's standard Micro-Homogenizing Package, which includes the PRO200 homogenizer and the industry's smallest generator, the 5 x 75 mm generator, volumes as small as 0.03 mL can be easily processed in a matter of seconds. Whether gently mixing, extracting RNA/DNA or destroying the cell wall, the PRO Micro-Homogenizing Package can effectively and efficiently process your sample.

The PRO Micro-Homogenizing Package is available in three styles, the Standard version, Deluxe version or Premium version. The Deluxe Micro-Homogenizing Package features two generators,the 5 x 75 mm generator as well as the 7 x 95 mm generator. The 7 x 95 mm generator features a saw tooth design, which makes it ideal for processing tougher samples. The Premium Micro-Homogenizing Package is the ultimate setup for microprocessing. This package includes the PRO200 homogenizer , both the 5 x 75 mm and 7 x 95 mm generators as well as the PRO200 stand assembly for hands free homogenizing.

• Standard Micro-Homogenizing Package: Includes PRO200 homogenizer and 5 X 75 mm flat bottom generator: PK-01200S (115V), PK-02200D (220V)
• Deluxe Micro-Homogenizing Package: Includes PRO200 homogenizer, toolkit,5 x 75 mm flat bottom generator and 7 x 95 mm saw tooth bottom generator: PK-01200D (115V) PK-02200D (220V)
• Premium Micro-Homogenizing Package: Includes PRO200 homogenizer, toolkit,5 x 75 mm flat bottom generator and 7 x 95 mm saw tooth bottom generator and PRO200 stand assembly: PK-01200P (115V) PK-01200P (220V)

BioPulverizer

The Bio-Pulverizer reduces tissue hard-frozen in liquid nitrogen to a fine powder. Called freeze-fracturing, this method is especially useful for tough, fibrous tissues such as skin, cartilage, cornea, etc. The Bio-Pulverizer consists of a hole machined in a stainless steel base, into which fits a special piston. In a typical procedure, up to 10g of animal or plant tissue is hard-frozen in liquid nitrogen and placed in the pre-chilled Bio-Pulverizer. The piston is mounted on an easy to use trigger mechanism that is squeezed to deliver a blow to the brittle tissue reducing it to a fine powder. Freeze fracturing with the Bio-Pulverizer is also useful for extracting labile tissue metabolites and as a preliminary step to other homogenization techniques. 2 year warranty

How the Bio-Pulverizer Works

• Place the Bio-Pulverizer in the insulated container and cool thoroughly with either liquid nitrogen (preferred) or a dry-ice/alcohol mixture.
• Place pre-frozen tissue in the well of the mortar. Re-insert the pestle into the well.
• Remove the mortar from the insulated container and pulverize the tissue with one or two blows to the pestle.
• Invert the mortar and empty the powdered contents for subsequent homogenization or extraction procedure.

Tissue-Tearor

AWAY FROM ELECTIRCAL LINES? The model 780CL Cordless Tissue-Tearor includes a cordless, high speed motor, one probe of your choice, one rechargable 9.6 volt battery pack and a plug-in charger. The maximum speed of the 780CL is slightly slower than the line-operated TissueTearor (25,000 vs 35,000 rpm), it is quite adequate for homogenizing soft tissue like muscle, liver, brain, etc. 

• Use for mixing, emulsification, shredding, or chopping.
• Practical answer for small samples.
• Easy to hold and light weight for one hand operation. Can also be stand mounted.
• Autoclavable stainless steel probes. Inert to aggressive solutions.
• All probes are interchangable probes and are easily removed for cleanup.
• High speed motor. Speed control from 5,000 to 25,000 rpm.

The Tissue-Tearor is a rotor/stator type tissue homogenizer which can rapidly homogenize, disperse, and emulsify samples in 0.2 - 1000 mL of liquid. During operation, the suspended material is drawn into the core of the homogenizer by a rotor turning at up to 25,000 rpm. The material is repeatedly cycled through six narrow slits in the stator where it is rapidly sheared and disintegrated by high frequency mechanical action. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in ten to thirty seconds. Little, if any, heat is produced during the process.
Unlike most other Brands of rotor/stator type homogenizers, the Tissue-Tearor comes complete - that is, with both a motor and a probe (aka, generator, dispersing tool) - both included in one price.

Specifications

• Sample Volume Range: 0.3 to 1000 ml, depending on the probe selected (see table below).
• Universal Motor: 120 VAC, 138 watts or , for overseas applications, 230VAC2
• Variable Speed: 5,000 to 25,000 rpm, incremented by 5000 rpm.
• Probes made of Type 316 Stainless Steel with flurocarbon bushings.
• Weight: Approximately 1/2 Kg.