S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
VistaLab Ovation Pipette Tips
- VistaLab tips and tip racks are made of 100% pure virgin polypropylene.
Use genuine VistaLab pipette tips to maximize the exceptional performance and benefits of Ovation and MLA pipettes. All VistaLab pipettes are calibrated with VistaLab tips to provide a perfect fit and deliver reliable performance every time. We have a variety of packaging configurations and options of sterile, certified RNase/DNase free, non-pyrogenic, filtered, low retention and trace metal certified.
Fit is Everything | One Size Does Not Fit All
VistaLab pipettes are calibrated to VistaLab tips. Ovation pipettes are designed to make the pipette ”click” when tips are properly loaded eliminating the need for excessive force and ”jamming.” You'll never worry about tips falling off! In addition, when tips aren't jammed on, they are easier to eject, which is more ergonomic.
For optimal performance:
1) The pipette tip should be sealed properly. The seal area should be the entire side wall of the tip, from the bottom of the nozzle to the top lip of the tip. If the tips are not sealed, there could be leakage and contamination.
2) The tip should not extend too far up the nozzle or be too small to fit onto the nozzle. Either situation affects tip ejection, which is also not ergonomic.
Packaging Styles
VistaBulk™
- Non-sterile only
- Econo-Pak™ Bag
VistaTip™
- Individually wrapped - Paper/Plastic
VistaRak™
- 16 x 12 multichannel layout
- 92 tips in a hinged box
- footprint of just 4.5" x 6"
VistaStak™
- Non-sterile only
- 16 x 12 multichannel layout - 192 tips per layer with a footprint of just 4.5" x 6"
- Unique design - each layer is hinge locked to the next lower layer with a reusable hinged top for each layer as its uncovered.
- Environmentally friendly design uses less plastic.
- For Small volume (250 mL) tips - 5 layers - 960 tips
- For Micro (25 mL) and Large volume (1250 mL) tips - 3 layers - 576 tip
Stacked Rack™
- Non-sterile only - 200 tips/layer
- For Small volume (250 mL) tips - 5 layers - 1000 tips
- For Large volume (1250 mL) tips - 3 layers - 600 tips
VistaClear™ Box
- For 5 and 10 mL macro volume tips
- For 5 mL - 60 tips/box
- For 10 mL - 35 tips/box
VistaClear™ Box
- For 5 and 10 mL macro volume tips
- For 5 mL - 60 tips/box
- For 10 mL - 35 tips/box
Beveled, Referenced, Metal and Pyrogen Free!
For use with:
- Pipetman P-20, P-100, P-200
- AlphaPette
- All major brands with volume up to 200µl
P-NKD-1 200µl tips are referenced at 200-250-500-1000µl
Labcon Zap™ Slik Aerosol For Rainin LTS Pipettor Tips
ZAP™ Slik Aerosol filter Pipette Tips from Labcon combine the higher standard of ZAP™ filters with our own unique low retention pipette tips.
Packaging
96 Rack
Offer workhorse reliability and versatility. They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves. Smooth rounded edges and a reinforced seal make these racks durable additions to your lab. Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting. A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile. The long thin design of the 192 rack allows for more working space on the lab bench.
Eclipse UNO Refills
Bring the same ease, value, and low carbon footprint of Eclipse refills to aerosol filter tips. These refills use a validated sterile process and include an expiration date on every pack. Eclipse packaging in made exclusively from recyclable and renewable materials.
Proudly made in the USA! Click here for more made in America products!
Labcon ZAP™ Slik Aerosol Filter Universal Pipette Tips
ZAP™ Slik Aerosol filter Pipette Tips from Labcon combine the higher standard of ZAP™ filters with our own unique low retention pipette tips. These aerosol tips provide you with complete protection from sample carry-over at the same time they reduce sample retention. Incorporating a robotically inserted 10 um filter with a sponge-like porous pathway ZAP™ Slik tips have such a small pore they even block fluids in the unlikely event that you should over-pipette. And our SuperSlik®; polypropylene increases the hydrophobicity of tips surfaces, so they have up to 10 times less fluid retention.
ZAP™ Slik Aerosol Filter Pipette Tips have been proven in independent studies to block aerosol contamination. But unlike some leading brands of self-sealing aerosol resistant pipette tips they have no cellulose gum, toluene solvent, or colored dyes in the filter to mix with and contaminate your sample. Also, unlike self-sealing aerosol tips ZAP™ tips can be autoclaved in a steam autoclave. And ZAP™ tips will not wick fluids like cellulose filled aerosol resistant tips so you don't have to worry about how you hold your pipettor. Our ZAP™ tips in sterile racks, like all our other sterile products, receive valid sterilization processing compliant with ISO 11137. So unlike "pre-sterile" tips from other pipette tip suppliers you can use ZAP™ Slik tips for diagnostic and regulated procedures. And ZAP™ Slik tips are RoHS compliant, unlike other low retention tips, so you don't have to worry that additives will migrate into your sample.
- 1171 - 10 uL ZAP™ Slik Pipette Tips
- 1172 - 10 uL Extended Length with TubeGuard™ ZAP™ Slik Pipette Tips
- 1173 - 10 uL Extra-Long ZAP™ Slik Pipette Tips
- 1175 - 20 uL ZAP™ Slik Pipette Tips
- 1143 - 20 uL ZAP™ Slik Pipette Tips for Rainin® LTS™
- 1174 - 100 uL ZAP™ Slik Pipette Tips
- 1179 - 200 uL ZAP™ Slik Pipette Tips
- 1144 - 200 uL ZAP™ Slik Pipette Tips for Rainin® LTS™
- 1146 - 200 uL Wide Orifice ZAP™ Slik Pipette Tips
- 1178 - 300 uL ZAP™ Slik Pipette Tips
- 1142 - 300 uL ZAP™ Slik Pipette Tips for Rainin® LTS™
- 1147 - 300 uL Extended Length ZAP™ Slik Pipette Tips
- 1177 - 1000 uL ZAP™ Slik Pipette Tips
- 1145 - 1000 uL ZAP™ Slik Pipette Tips for Rainin® LTS™
- 1148 - 1000 uL ZAP™ Slik Wide Orifice Pipette Tips
Packaging
96 Rack
Offer workhorse reliability and versatility. They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves. Smooth rounded edges and a reinforced seal make these racks durable additions to your lab. Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting. A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile. The long thin design of the 192 rack allows for more working space on the lab bench.
Eclipse UNO Refills
Bring the same ease, value, and low carbon footprint of Eclipse refills to aerosol filter tips. These refills use a validated sterile process and include an expiration date on every pack. Eclipse packaging in made exclusively from recyclable and renewable materials.
Proudly made in the USA! Click here for more made in America products!
Labcon LTS Style Low Binding Tips - Bulk Lid
SuperSlik® Low Retention tips have a proprietary modified polypropylene surface that limits the adhesion of cells, rDNA, proteins, and other viscous materials. Their accuracy and precision is up to 10 times better with viscous samples than standard non-wettable polypropylene. SuperSlik® tips are made from our own proprietary resin formulation that uses no additives or coatings that migrate into your samples. Unlike low retention tips from many others, SuperSlik® tips use no restricted chemicals and meet RoHS regulations. The resin helps increase the contact angle of fluids and lets you dispense the maximum amount of sticky DNA molecules. These tips were developed in our own laboratory and have been found to be ideal for viscous samples. Low retention tips are best suited for pipetting thick or sticky fluids and may not be appropriate for all uses.
1161 – SuperSlik® 10 uL Pipette Tips with UltraFine™ Point
1162 - SuperSlik® 10 uL Extended Length Pipette Tips with TubeGuard™
1165 - SuperSlik® 10 uLL Extra-Long Pipette Tips
1065 - SuperSlik® 200 uL Pipette Tips with BevelPoint™
1167 - SuperSlik® 100 uL Pipette Tips for Eppendorf® Pipettors
1164 - SuperSlik® 250 uL Wide Orifice Pipette Tips for Whole Cells
1166 - SuperSlik® 250 uL UltraFine™ Point Pipette Tips
1169 - SuperSlik® 300 uL Pipette Tips with BevelPoint™
1168 - SuperSlik® 1250 uL UltraFine™ Point Pipette Tips
1066 - SuperSlik® 20 uL Pipette Tips for Rainin® LTS™ Pipettors
1067 - SuperSlik® 250 uL Pipette Tips for Rainin® LTS™ Pipettors
1160 - SuperSlik® 300 uL Pipette Tips for Rainin® LTS™ Pipettors
1068 - SuperSlik® 1000 uL Pipette Tips for Rainin® LTS™ Pipettors
Packaging
Proudly made in the USA! Click here for more made in America products!
Labcon LTS Style Low Binding Tips - Hinged Lid
SuperSlik® Low Retention tips have a proprietary modified polypropylene surface that limits the adhesion of cells, rDNA, proteins, and other viscous materials. Their accuracy and precision is up to 10 times better with viscous samples than standard non-wettable polypropylene. SuperSlik® tips are made from our own proprietary resin formulation that uses no additives or coatings that migrate into your samples. Unlike low retention tips from many others, SuperSlik® tips use no restricted chemicals and meet RoHS regulations. The resin helps increase the contact angle of fluids and lets you dispense the maximum amount of sticky DNA molecules. These tips were developed in our own laboratory and have been found to be ideal for viscous samples. Low retention tips are best suited for pipetting thick or sticky fluids and may not be appropriate for all uses.
1161 – SuperSlik® 10 uL Pipette Tips with UltraFine™ Point
1162 - SuperSlik® 10 uL Extended Length Pipette Tips with TubeGuard™
1165 - SuperSlik® 10 uL Extra-Long Pipette Tips
1065 - SuperSlik® 200 uL Pipette Tips with BevelPoint™
1167 - SuperSlik® 100 uL Pipette Tips for Eppendorf® Pipettors
1164 - SuperSlik® 250 uL Wide Orifice Pipette Tips for Whole Cells
1166 - SuperSlik® 250 uL UltraFine™ Point Pipette Tips
1169 - SuperSlik® 300 uL Pipette Tips with BevelPoint™
1168 - SuperSlik® 1250 UltraFine™ Point Pipette Tips
1066 - SuperSlik® 20 uL Pipette Tips for Rainin® LTS™ Pipettors
1067 - SuperSlik® 250 uL Pipette Tips for Rainin® LTS™ Pipettors
1160 - SuperSlik® 300 uL Pipette Tips for Rainin® LTS™ Pipettors
1068 - SuperSlik® 1000 uL Pipette Tips for Rainin® LTS™ Pipettors
Packaging
Bulk Pack
Tips are supplied in one large bag inside a corrugated container. These are not recommended for long term storage due to warping.
96 Rack
Offer workhorse reliability and versatility. They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves. Smooth rounded edges and a reinforced seal make these racks durable additions to your lab. Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting. A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile. The long thin design of the 192 rack allows for more working space on the lab bench.
Eclipse Refills
Proudly made in the USA! Click here for more made in America products!
Please contact us for assistance in finding your best alternative tip option.
Labcon Eclipse™ Macro Volume Pipette Tips
- Designed to fit macro volume pipettors
- Made of clear, 100% polypropylene
- Autoclavable (122°C)
- Available in resealable bags or composite racks
- 1025 - 5 mL Graduated Macro Pipette Tips for Gilson™ and Rainin™ Macro Pipettors
- 1027 - 5 mL Graduated Macro Pipette Tips for Sartorius™ and Eppendorf™ Pipettors
- 1028 - 5 mL Macro Pipette Tips for Macro Pipettors
- 1029 - 10 mL Pipette Tips for Macro Pipettors
Proudly made in the USA! Click here for more made in America products!
Labcon APT™ Automation Pipette Tips
Labcon automation pipet tips APT™ for Beckman® FX, NX and other brands are designed and tested to fit your workstation. Made from pure pre-tested medical grade resins to ensure the integrity of your work. Each lot is tested and certified free of ATP, RNase/DNase (Nuclease), and Endotoxins (non-pyrogenic). Resins are pre-tested with a USP test method to ensure they are free of Oleamide and Phalates. Unlike tips sold as “pre-sterile” these tips use a validated medical grade sterilization process. You can use these tips in diagnostics, regulated testing, and medical screening procedures.
Labcon Robotic Pipette Tips are made of virgin polypropylene and furnished pre-racked in extra-heavy automation grade polypropylene racks and are autoclavable.
- 8005 – P30 AP384 Style, 30 uL capacity
- 8014 – P20 AP96 Style, 100 uL capacity
- 8114 – P20 AP96 Style, with Filter, 100 uL capacity
- 8024 – P50XL AP96 Style, 90 uL capacity
- 8017 – P250XL AP96 Style, 220 uL capacity
- 8117 – P250XL AP96 Style, with Filter, 220 uL capacity
Proudly made in the USA! Click here for more made in America products!
Gel-Loading Pipette Tips
Gel-Loading Pipette Tips are designed for precise and accurate sample loading into gels.
- Round or at tip options to meet all customer preferences
- Short body 200 μL available in bulk packaging
- Patented press-to-open racks provide easy, one-handed opening
- Universal fit to accommodate most pipettor brands
- Multichannel-friendly with a standard 96-tip arrangement
- Small pack sizes—preferred by more researchers
- Certified free of detectable RNase, DNase, DNA, PCR inhibitors, and tested pyrogen-free. Sterile product is certified endotoxin-free
Specifications
| Item # | Description | Packaging |
| 4817-00 | 10µL, 0.57mm Round Tips | 96/rk, 2 rks/pk, 5 pks/cs |
| 4817-0A | 10µL, 0.37mm Flattened Tips | 96/rk, 2 rks/pk, 5 pks/cs |
| 4817-0B | 10µL, 0.17mm Flattened Tips | 96/rk, 2 rks/pk, 5 pks/cs |
| 4817-S0 | 10µL Gel-Loading Tips, 0.57mm Round, Sterile | 96/rk, 2 rks/pk, 5 pks/cs |
| 4817-SA | 10µL Gel-Loading Tips, 0.37mm Flat, Sterile | 96/rk, 2 rks/pk, 5 pks/cs |
| 4817-SB | 10µL Gel-Loading Tips, 0.17mm Flat, Sterile | 96/rk, 2 rks/pk, 5 pks/cs |
| 4817-SF | 10µL Filter Gel Tips 0.57mm Round, Racked, Sterile | 96/rk, 2 rks/pk, 5 pks/cs |
| 4837-00 | 200µL Gel-Loading Tips, 0.57mm Round, Racked | 96/rk, 2 rks/pk, 5 pks/cs |
| 4837-0A | 200µL Gel Loading Tips, 0.37mm Flat, Racked | 96/rk, 2 rks/pk, 5 pks/cs |
| 4837-0B | 200µL Gel-loading Tips, 0.17mm Flat, Racked | 96/rk, 2 rks/pk, 5 pks/cs |
| 4837-S0 | 200µL Gel-Loading Tips, 0.57mm Round, Sterile, Racked | 96/rk, 2 rks/pk, 5 pks/cs |
| 4837-SA | 200µL Gel-Loading Tips, 0.37mm Flat, Sterile, Racked | 96/rk, 2 rks/pk, 5 pks/cs |
| 4837-SB | 200µL Gel-Loading Tips, 0.17mm Flat, Sterile, Racked | 96/rk, 2 rks/pk, 5 pks/cs |
| 4840-00 | 200µL Gel-Loading Tips, 0.57mm Stepped (MBP/QSP Style) | 1,000/bg, 10 bgs/cs |
| 4847-00 | 200µL Gel Tips, Short-Body, 0.57mm Rnd (MBP/QSP Style), Racked | 96/rk, 2 rks/pk, 5 pks/cs |
| 4847-S0 | 200µL Gel Tips, Short-Body, 0.57mm Rnd (MBP/QSP Style), Racked, Sterile | 96/rk, 2 rks/pk, 5 pks/cs |
| 4847-AF | 20µL Gel Filter Tips, Short-Body, 0.57mm Rnd (MBP/QSP Style), Racked, Sterile | 96/rk, 2 rks/pk, 5 pks/cs |
| 4847-BF | 100µL Gel Filter Tips, Short-Body, 0.57mm Rnd (MBP/QSP Style), Racked, Sterile | 96/rk, 2 rks/pk, 5 pks/cs |
Proudly made in the USA! Click here for more made in America products!
Labcon Zap™ Slik Aerosol Extend Length Pipette Tips
ZAP™ Slik Aerosol filter Pipette Tips from Labcon combine the higher standard of ZAP™ filters with our own unique low retention pipette tips.
Packaging
96 Rack
Offer workhorse reliability and versatility. They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves. Smooth rounded edges and a reinforced seal make these racks durable additions to your lab. Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting. A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile. The long thin design of the 192 rack allows for more working space on the lab bench.
Bring the same ease, value, and low carbon footprint of Eclipse refills to aerosol filter tips. These refills use a validated sterile process and include an expiration date on every pack. Eclipse packaging in made exclusively from recyclable and renewable materials.
Proudly made in the USA! Click here for more made in America products!
Labcon Zap™ Slik Aerosol Filter Wide Orifice Pipette Tips
ZAP™ Slik Aerosol filter Pipette Tips from Labcon combine the higher standard of ZAP™ filters with our own unique low retention pipette tips.
Packaging
96 Rack
Offer workhorse reliability and versatility. They have heavy hook hinges that are extremely durable and an ergonomic snap-latch that won’t catch gloves. Smooth rounded edges and a reinforced seal make these racks durable additions to your lab. Strong enough to be autoclaved many times. The separate rack insert includes a beveled top an extra-sturdy surface for multi-channel pipetting. A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile. The long thin design of the 192 rack allows for more working space on the lab bench.Eclipse UNO Refills
Bring the same ease, value, and low carbon footprint of Eclipse refills to aerosol filter tips. These refills use a validated sterile process and include an expiration date on every pack. Eclipse packaging in made exclusively from recyclable and renewable materials.
Proudly made in the USA! Click here for more made in America products!
Labcon LTS Style Low Binding Tips - Bulk Lid
Proudly made in the USA! Click here for more made in America products!
Web Content Viewer
Actions