MIDSCI™ Brand labels are being discontinued.

Products are available for purchase while in stock.

Check out our PR1MA™ – Cryo Label Sheets for more options!  

MIDSCI™ Cryogenic Labels - Sheets

Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other containers can be a challenge when stored in temperatures below -20ºC.
Providing a high-quality Cryo label is essential for laboratories, researchers, etc. It will provide fewer errors, better accuracy, and more proficiency and all of this leads to better results at a better budget.  

We offer a high-quality adhesive that can stick to already-frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below -80ºC and as low as -196ºC. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI^™’s Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.

Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive allows the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder-coated metal, and iron. 

MIDSCI™ Brand labels are being discontinued.

Check out our PR1MA™ – CryoTag Sheets for Tubes for more options!

MIDSCI™ Cryogenic Labels - Sheets

Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other containers can be a challenge when stored in temperatures below -20ºC.
Providing a high-quality Cryo label is essential for laboratories, researchers, etc. It will provide fewer errors, better accuracy, and more proficiency and all of this leads to better results at a better budget.  

We offer a high-quality adhesive that can stick to already-frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below -80ºC and as low as -196ºC. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI^™’s Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.

Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive allows the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder-coated metal, and iron. 

MIDSCI™ Brand labels are being discontinued.

Check out our PR1MA™ – CryoDot Sheets for Tubes for more options!

MIDSCI™ Cryogenic Labels - Sheets

Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other containers can be a challenge when stored in temperatures below -20ºC.
Providing a high-quality Cryo label is essential for laboratories, researchers, etc. It will provide fewer errors, better accuracy, and more proficiency and all of this leads to better results at a better budget. 

We offer a high-quality adhesive that can stick to already-frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below -80ºC and as low as -196ºC. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI^™’s Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.

Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive allows the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder-coated metal, and iron. 

Syringe Flag Vaccine Labels

• Identify the vaccine type at a quick glance with the color-coded flag and large text
• The portion of the label that adheres to the syringe is clear, allowing the user to easily identify what it is in the syringe
• A space is provided for the time the vaccine was administered to be handwritten on the label
• Made in the USA

Material:  Mylar with Clear Laminate

Adhesive:  Permanent

MIDSCI™ Brand labels are being discontinued.

Check out our PR1MA™ – CryoTag Sheets for Vials for more options!   

MIDSCI™ Cryogenic Labels - Sheets

Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other containers can be a challenge when stored in temperatures below -20ºC.
Providing a high-quality Cryo label is essential for laboratories, researchers, etc. It will provide fewer errors, better accuracy, and more proficiency and all of this leads to better results at a better budget.  

We offer a high-quality adhesive that can stick to already-frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below -80ºC and as low as -196ºC. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI^™’s Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.

Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive allows the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder-coated metal, and iron. 

MIDSCI™ Brand labels are being discontinued.

Check out our PR1MA™ – CryoTag Sheets for General Use for more options!

MIDSCI™ Cryogenic Labels - Sheets

Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other containers can be a challenge when stored in temperatures below -20ºC.
Providing a high-quality Cryo label is essential for laboratories, researchers, etc. It will provide fewer errors, better accuracy, and more proficiency and all of this leads to better results at a better budget.   

We offer a high-quality adhesive that can stick to already-frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below -80ºC and as low as -196ºC. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI^™’s Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.

Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive allows the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder-coated metal, and iron. 

MIDSCI™ Brand labels are being discontinued.

Check out our PR1MA™ – CryoTag Sheets for Microplates for more options!

MIDSCI™ Cryogenic Labels - Sheets

Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other containers can be a challenge when stored in temperatures below -20ºC.
Providing a high-quality Cryo label is essential for laboratories, researchers, etc. It will provide fewer errors, better accuracy, and more proficiency and all of this leads to better results at a better budget.  

We offer a high-quality adhesive that can stick to already-frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below -80ºC and as low as -196ºC. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI^™’s Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.

Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive allows the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder-coated metal, and iron. 

MIDSCI™ Brand labels are being discontinued.

Check out our PR1MA™ – CryoTag Sheets for General Use for more options!

MIDSCI™ Cryogenic Labels - Sheets

Labeling frozen vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags, and other containers can be a challenge when stored in temperatures below -20ºC.
Providing a high-quality Cryo label is essential for laboratories, researchers, etc. It will provide fewer errors, better accuracy, and more proficiency and all of this leads to better results at a better budget.  

We offer a high-quality adhesive that can stick to already-frozen vials and other objects. The adhesive on this type of label will adhere to a surface in wet and/or cold conditions. The adhesive on the label is specifically designed to stick in temperatures below -80ºC and as low as -196ºC. When storing in deep freeze liquid nitrogen or vapor phase liquid nitrogen our Cryo labels will stay in place. MIDSCI^™’s Cryo labels are resistant to smearing without any additional lamination. They also won't become brittle or cracked.

Our cryogenic labels are made of thermoplastic film and coated with a glove-friendly cryogenic adhesive. This special adhesive allows the label to remain strong and sticky so that it can be securely attached to stainless steel, aluminum, paint, powder-coated metal, and iron. 

This product is no longer available, please contact us for other options.

Looking for other alternatives?

Visit our Labels page for more options!

Bullseye Tough-Spots

• TEMPERATURE RESISTANT- From -196°C to 80°C
• SAVE TIME-Preprinted Tough-Spots make labeling and identifying samples quick and easy. Use the numbered tough-spots to identify a series of samples, no handwriting or printing needed.
• COLOR CODED-Each color coded Tough-Spot has a distinctly different color to identify similar samples and also includes a white area to clearly write a quick note about it.
• SAFETY-Lab safety is always a top priority. Use the Biohazard or Radioactive Tough-Spots to identify tubes or other vessels containing hazardous materials.

These items have been discontinued.

See Thermal Transfer Tough-Tags® on a Roll for alternative options!

Direct Thermal Removable Tough-Tags® on a Roll

• Removable Tough-Tags are durable labels that cleanly remove from reusable surfaces.
• No Residue - Easily remove from surfaces without leaving adhesive. Track Samples - Use labels to follow samples from purification to processing

Resistant to most laboratory solvents, including short-term resistance to acetone and xylene. Great for beakers, bottles, flasks, glass vials, tubes, tube racks, pipettes. Available on rolls for handwriting or for direct thermal printing using the Dymo LabelWriter.

Proudly made in the USA! Click here for more made in America products!