GeneFiX™ Saliva DNA/RNA Collection and Isolation

The GeneFix™ range of DNA/RNA products has been designed to simply maximize the yields and purity of DNA/RNA collected and stabilized from Saliva. Isohelix has over the years built a leading reputation for designing and manufacturing DNA/ RNA sampling and purification products, built around their unique High Yielding DNA Buccal Swabs together with their associated kits to stabilize and isolate your DNA/RNA.

GeneFiX™ products use many shared chemistries and knowledge designs from our existing swab DNA isolation kits, and where technically appropriate these have been re-configured, or method developed to optimize their use solely on saliva stabilized either from the GeneFiX™ collectors or other saliva collection devices. The resulting DNA/RNA collected through GeneFiX™, as with the Isohelix Buccal DNA, can be used in the most demanding downstream processes.
 

• Stabilizes DNA & RNA at Room Temperature
• Total DNA Yields Exceeding 300 μg/µL
• Guanidinium Free Pre-Filled Stabilization Buffer
• Optimized with GeneFix Isolation Kits
• Non-Toxic - Non-Hazardous - Easy to Use
• Unique Funnel Design Prevents Spillages or Buffer Flow Back
• Suitable for Field, Home Use & Clinic-Based Sampling
• Collection Tube Specified to 95kPa for Leak Proof Mailing

DNA/RNA Saliva Collectors

GeneFix™ is an easy-to-use and economical DNA/RNA saliva collection device, designed specifically to store and stabilize long-term DNA for 1 or 2 mL saliva samples, and now additionally our new High Capacity collector for 3 mL samples. The collection tube is pre-filled with a fully tested and chemically optimized stabilization buffer. The simple screw-on funnel enables the saliva sample to be delivered directly and quickly into the buffer.

Clear, legible markings on the GeneFiX™ collection tubes indicate the correct volume of Saliva to be delivered, before removing and sealing the tube, the unique funnel design prevents spillages and flow back even when accidentally knocked over. The collection tubes will withstand defined physical pressures that have been specified for leakproof sample transport and are designed for either manual or more automated application with printed bar codes and caps options being suitable for auto de-capping machines.

• GFX-01 Can Collect 1 mL of Saliva & Stabilize DNA For Up To 60 Months
• GFX-02 Can Collect 2 mL of Saliva & Stabilize DNA For Up To 60 Months
• Xtra DNA Collect GFX-03 Can Collect 3 mL of Saliva &stabilize DNA For Up To 60 Months

Isohelix™ Buccal-Mag DNA Isolation Kit

High Throughput Magnetic Bead DNA Isolation

BMG is a Fast & Reliable Method for Medium to High Throughput Purification of DNA Samples.

• High Binding Capacity to Maximize Sample Yields
• High Purity & Yield for Enhanced Downstream Performance
• Variable Sample Volumes for Flexible Methodology
• Non-Toxic to Reduce Risk Considerations Over Other Kits
• Makes Use of Original Tubes to Reduce Waste & Cost
• Developed Specifically for Buccal Swabs

TPP Cryo Box 

The TPP Cryo Box is designed to provide secure, efficient, and organized storage for cryogenic samples in freezers. Manufactured from high-quality polypropylene, these cryo storage boxes are durable, autoclavable, and resistant to repeated use under extreme cold storage conditions. With a convenient 9x9 divider system, each box can hold up to 81 cryogenic vials, keeping samples neatly arranged and easy to locate.

Each cryo box features black alphanumerical coding on the base and rim, ensuring every vial position is clearly marked and assigned. The transparent lid allows fast identification of samples without opening the box, reducing handling time and maintaining sample integrity. Designed for practicality, the lids can be easily removed or replaced—even with one hand—making them ideal for high-throughput laboratory workflows.

TPP Cryo Boxes fit most standard stainless steel freezer racks, ensuring seamless integration into existing lab storage systems. Available in a standard size (133 x 133 x 45 mm), these boxes are engineered for cryo tubes up to 2.0 mL. For labs seeking dependable, reusable, and efficient cryogenic storage solutions, TPP Cryo Boxes offer unmatched quality and performance.

Main Attributes

• Durable polypropylene construction, autoclavable and freezer-safe
• Transparent lid for quick sample visibility
• 9x9 grid with alphanumerical coding for easy organization
• Fits 1.2 mL to 2.0 mL cryogenic vials
• Designed for easy "one-handed" use lids
• Compatible with most freezer rack systems

Contact us today to request your free TPP Cryo Box sample and experience the convenience of secure, organized cryogenic storage.   
 

Isohelix™ Stoolfix Gut DNA Microbiome Stabilization Kits

The StoolFix Gut Microbiome Collection and Stabilization prefilled tubes use the latest Isohelix™ DNA Stabilization chemistry, fully optimized for fecal microbiome DNA.

To minimize sample handling, the Isohelix™ DNA swabs (SK-3S) are used to collect and transfer the sample into prefilled tubes containing the StoolFix buffer. Once sealed the buffer protects the DNA integrity and maximizes yield for months at room temperature. 

The robust tube is well suited to shipping, combining the collection, transportation, and storage of samples into one tube.

• Combines effectively with Isohelix™ swabs for high yield and versatility
• Transport tested for at-home sampling
• Eliminates the need for cold storage
• Stabilized for months at room temperature
• Minimized sample handling
• Widely compatible chemistry
• Optimal DNA Isolation with BuccalFix Plus DNA Isolation kit (1 x BFP-50 = 25 StoolFix samples)

MTC™ Bio Erlenmeyer Flasks

Sterile, Vented, High-Performance Cell Culture Flasks.

MTC™ Bio’s Erlenmeyer Shaker Flasks are designed for high-efficiency cell culture and microbial growth. Made from high-quality polycarbonate, PETG, or styrene/butadiene (for Jumbo Flasks), these flasks provide durability and clarity for optimal lab performance.

Each flask features a vented polypropylene screw cap with a 0.2 uM membrane filter, allowing enhanced gas exchange to support vigorous cell growth. The standard SBS-compatible mouth ensures a secure fit with bioreactor and shaker equipment for seamless integration.

Polycarbonate flasks and Jumbo Fernbach flasks feature a baffled (ribbed) bottom, promoting superior oxygenation and efficient mixing, even at lower shaking speeds.

All Erlenmeyer flasks are individually wrapped and gamma sterilized to a Sterility Assurance Level (SAL) of 10, and are certified RNase-, DNase-, pyrogen-, endotoxin-, and human DNA-free for uncompromised experimental conditions.

Key Features

• Vented screw caps with 0.2 uM filters for increased air exchange
• Available with flat or baffled bottoms
• Gamma sterilized (SAL 10)
• Free of RNase, DNase, pyrogens, endotoxins, and human DNA
• Individually wrapped for sterility
• Polycarbonate flasks are autoclavable at 121°C and 15 psi for 30 minutes 

These flasks are ideal for suspension cell cultures, microbial fermentation, and other bioreactor-compatible applications.
 

Isohelix™ GeneFix™ Saliva-Prep 2 DNA Isolation Kit

The Isohelix GeneFix™ Saliva-Prep Isolation kit is designed specifically for use with Saliva samples and uses a precipitation method to quickly and easily isolate the DNA up to 2 mL volumes from the GeneFix™ Saliva DNA Collectors.

The GeneFix™ Saliva-Prep kit does not use solvents, columns, or filtration and the reduced number of protocol steps makes it extremely easy to use where a simple yet efficient isolation method is required.

Features

• High yields in excess of 100 µg from 2 mL of Saliva
• High Purity for the most demanding of applications
• Fully optimized for use with Saliva
• Fast handling times, and reduced handling steps
• No Solvents, Columns, or Filtration requirements
• High Throughput Protocol for DeepWell Plates

NEST High-Efficiency Erlenmeyer Flasks

High-efficiency, large-volume culture flasks allow cells to show strong viability with large expression amounts of proteins in the culture of mammalian cells and insect cells. During the culturing process, the use rate of the shaker is significantly increased, and the survival rate and viability of cells are both dramatically elevated.

NEST culture flasks also provide high repeatability, which allows high inter-batch consistency of cell growth and yield.

3 L Wide-mouth Efficient Erlenmeyer Flask

Isohelix™ Dri-Capsules

Designed to Quickly & Efficiently Dry Buccal Swabs & Preserve DNA.

SGC Dri-Capsules are a Fast, Simple & Easy way of Stabilizing Buccal Swab Samples

• Long-Term Stability at Room Temperature
• Reduces DNA Cross Contamination Risk
• Non-Toxic & Inert Coating – Very Easy to Handle
• Ideal for Remote & Field Sample Collection
• 50 Isohelix™ Dri-Capsules all individually foil wrapped

MADE FOR SK-1S BUCCAL SWABS

The 5 mL Tube in The SK-1S Works Perfectly With Our Dri-Capsules (SGC)

Laser Tough-Tag® Sheets for 0.5 and 1.5 mL Tubes

Specially designed to permanently accept laser printing.

Laboratory labels formatted for laser printers. Tough-Tags® are chemically inert laboratory labels that strongly adhere to microtubes, test tubes, storage boxes, and microscope slides. They resist organic solvents and caustic agents. Tough-Tags® are perfect for accurately identifying important samples stored in moderate freezer temperatures (121 to -40°C)

Tough-Tags are pre-cut, peel-off labels that accept any marking instrument and are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes with Tough-Tags wrapped around them will still slide easily in and out of rotors without binding because the labels are thin and the adhesive does not migrate from behind the label even after boiling and autoclaving.

• Colors: White, Blue, Green, Orange, Red, Yellow, or "Rainbow Pack"
• Rainbow Pack includes 5 sheets of each color: Blue, Green, Orange, Red, and Yellow 

*For best adhesion, it is recommended that siliconized surfaces be avoided.

Specifications
 

Temp. Range	-40 to 249.8ºF | -40 to 121°C
Ideal Use	0.5 to 1.5 mL Tubes
Length	0.94 In. | 23.88 mm
Width	0.50 In. | 13 mm
Layout	7 Across - 17 Down
U of M	Sheet
Qty	2,975/pk

Cryo-Clear™ Laser Sheets

Cryo-Clear™ labels withstand both long term cryogenic storage conditions and conventional freezer storage. Cryogenic labels are chemically inert with a solvent resistant adhesive that will adhere to cryogenic vials, microtubes, test tubes, glass vials, beakers, and metal racks. Sold in sheets.

Specifications

Proudly made in the USA! Click here for more made in America products!
  

Wash-Off Label Sheets

No Adhesive Residue - Label and adhesive completely dissolve in any water temperature in under 30 seconds. Environmentally Safe - 100% biodegradable and FDA Compliant for indirect food contact. Autoclavable- Labels resist exposure to steam at 121°C. Temperature-resistant - Storage at room temperature to moderate freezer temperatures. Laser Printable - Labels readily accept laser printing for quick labeling of laboratory containers. Ideally Sized - Fits a variety of bottles, flasks, beakers, and other laboratory containers. A build-up of liquid water on the label surface will dissolve the material.

Specifications
 

Item #	WASH-1000	WASH-2000
Label Size	2.625 x 1.00 In. | 66.675 x 25.4 mm	4.00 x 1.00 In. | 101.6 x 25.4 mm
Ideal Use	Various laboratory containers	Various laboratory containers
Sheet Layout	3 across - 10 down	2 across - 10 down
Color	White	White
U of M	750/pk	500/pk

 

Proudly made in the USA! Click here for more made in America products!
  

Laser Sidewall Cryo-Tag® Sheets

Cryogenic labels formatted for laser printers. Our patented Cryo-Babies® and Cryo-Tags® withstand both long term cryogenic storage conditions and conventional freezer storage. Cryogenic labels are chemically inert with a solvent resistant adhesive that will adhere to croygenic vials, microtubes, test tubes, glass vials, beakers and metal racks. Cryo-Babies® and Cryo-Tags® also withstand flash/snap freezing in liquid nitrogen, boiling water baths at 100°C and dry heat up to 150°C.

Specifications
 

Temp. Range	-40 to 302ºF | -40 to 150°C
Ideal Use	Microplates
Length	1.50 In. | 38.01 mm
Width	0.25 In. | 6.35 mm
Layout	8 Across - 12 Down
U of M	4 Across - 39 Down
Qty	1,040/pk

 

Proudly made in the USA! Click here for more made in America products!