Hoefer® Smart TubeLaser

The Smart TubeLaser offers precise tube marking, replacing traditional labels with permanent laser etching that is resistant to fading and peeling. Its adaptable coding design allows for personalized customization, making it ideal for laboratory environments. By ensuring superior readability and traceability of your samples, the Smart TubeLaser significantly enhances both efficiency and safety in your lab.

• Laser Engraving: Utilizes advanced laser technology to deliver high-quality, precise markings.
• Customizable Content: Offers flexibility to engrave characters, numbers, letters, barcodes, QR codes, graphics, and more. 
• Permanent Marking: Provides scratch-resistant, low-temperature-resistant, and durable markings, eliminating the risks of peeling, damage, or loss.
• Desktop Design: Compact and highly integrated, making it ideal for small-scale cryovials and shipment vials in laboratory settings.
• Rapid Engraving: Capable of engraving 12 cryotubes in under 10 seconds. 
• Differentiated Information Etching: Supports the engraving of both individual and batch-specific information on cryotubes.
• Open Communication Interface: Integrates seamlessly with existing software systems and supports the import of external data.
• Compatibility: Fully compatible with Hoefer's extensive range of editable tubes in various 

Specifications
 

Dimensions (D x W x H)	16.54 x 13.39 x 24.41 In. 420  x  340 x 620 mm
Laser	Fiber Laser
Laser Wavelength	1064 nm
Nominal Avg. Output Power	20W
Positioning Speed	F=160 mm, ≤ 7000 mm / s
Focus Lens	F=160 mm Standard
Marking Area	110 x110 mm
Marking Line Width	0.06 mm (depending on material)
Min. Character Height	0.2 mm
Cooling System	Air Cooling
Power Supply	1KW/AC220V/50Hz, voltage fluctuation range ±5%; a stabilizer is required if the fluctuation exceeds this range.
Grounding	The grid ground wire complies with national standards
Ambient Temperature	0 ~ 40°C
Ambient Humidity	30% ≤ RH ≤ 85%
Vibration	Foundation amplitude less than 50 uM; vibration acceleration less than 0.05 g.
Dust	less than 0.20 mg / m3
Oil Mist	Not allowed
Condensation	Not allowed

 

Hoefer® AutoLaser Marking Machine

• Laser-etch tri-code sample tubes with a maximum of 1200 tubes per hour, user-defined with their own information
• Customize the code using characters, numbers, letters, barcodes, 2D codes, graphics, etc
• Laser-etched code with high contrast and readability, simply recognized with a Hoefer® Barcode Reader.

Open communication interface for integrating into existing software. Data can be imported externally without manual input. Compatible with the entire suite of Hoefer® sample storage tubes. Simplify the sample handling process by solving issues of paper labels that are prone to contamination, not waterproof, and fall off at low temperatures

Specifications
 

Dimensions (D x W x H)	19.09 x 22.44 x 25.59 In. 485 × 570 × 650 mm
Unit Weight	158.73 lb | 72 kg
Optical Parameters	Marking range
Marking Line Width	0.06 mm (depend on the material)
Min. Character Height	0.2 mm
Cooling System	Forced air cooling
Controlling Unit	I5-6200 main board, 4G Memory, 128G drive, touch screen
Operating environment	1.5KW/AC220V/50Hz The voltage fluctuation range is ± 5%. If it exceeds the fluctuation range, a voltage regulator device needs to be equipped.
Grounding	Class D [grounding resistance 100 or less]
Ambient Temp.	10 ~ 35°C
Ambient humidity	≤ 90%
Vibrate	0.98m/s2 {0.1G} or less, 10~60Hz. During transportation: 4.9 m/s2 {0.5G} or less.
Dust	Less 0.20 mg/m3
Mist	Not allow
Condensation	Not allow