S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
Labcon UVsafe™ Amber 15 mL and 50 mL Centrifuge Tubes
For light sensitive samples.
- Certified to block 100% UV light
- Completely opaque, protecting even the most light sensitive compounds
- Will still pass visible light so you can see your sample volume
- Large, white solvent-resistant writing panel
- Caps & tubes feature recycling codes
- Plug caps are autoclavable when attached to UVsafe tubes
- Accurate, easy-to-read printed graduations
- Max RCF printed on the tube
- Freezeable (-80°C) and autoclavable 122°C), as long as caps are loosely attached to the tubes
Plug Caps
- Secure seal for extended storage
- Made from high-density polyethylene
- Autoclavable (122°C), as long as caps are loosely attached to the tubes
Proudly made in the USA! Click here for more made in America products!
Looking for replacement tubes? Check out PR1MA™ Microcentrifuge Tubes here!
- High centrifuging to 20,000 x G
- Freezable (-80°C)
- Autoclavable
- Capacity: 1.5 mL
- ATP, RNase/DNase and Endotoxin Free (non-pyrogenic)
- Attached flat snap caps
SuperSlik® low retention microcentrifuge tubes have a low protein binding surface that minimizes sample loss during sample manipulation. Ideal for applications such as mass spectrometry (ms), immunoprecipitation (IP), co-immunoprecipitation (Co-IP). Leakproof snap caps may be penetrated by a syringe and will no pop open during autoclaving. Compatible with many thermal cyclers and able to tolerate centrifuge speeds up to 20,000 RCF.
Proudly made in the USA! Click here for more made in America products!
LabCon SuperSpin® Microcentrifuge Tubes
- Ultra-high centrifuging up to 40,000 x G*
- Optically clear resin
- Resin will not interfere with DNA or PCR
- For Phenol/Chloroform vortexing
- Reduced Thumb Force
- Autoclavable (122°C) and freezable (-80°C)
- Packaged in resealable bags
- Tubes have flat pierceable caps and a side writing surface
- Graduated
SuperSpin® microcentrifuge tubes were designed with the ability to extract DNA from samples and then amplify that DNA with reliable results in mind. They can be trusted to spin at high rates and can be opened and closed easily many times to add or remove agents. The interior surfaces are ultra-smooth with low retention. The tubes are clear enough to be use in spectrophotometers and have no extractables at the wavelength ranges you use to detect DNA. SuperSpin® microcentrifuge tubes are more than twice as effective at transmitting light than most brands of micro centrifuge tubes.
*Maximum G-force can be affected by organic solvents, multiple spin cycles, or low temperature storage.
Proudly made in the USA! Click here for more made in America products!
Labcon Tip Top™ Dispenser Caps
- Convenient and Easy: Just tilt the tube and squeeze Tip Top® slightly to dispense one drop onto a slide.
- Safe Dispensing: You don't need to open the tube preventing spillage and exposure to infectious agents.
- Very Low Evaporation: A flexible cap is available to cover the Tip Top® so you can store samples longer.
- Medical Grade Resins: USP Class medical grade resins and packaging.
Safe Dispensing of Blood Samples
Tip Top® Dispenser Caps A safe and cost-effective way of dispensing samples in your lab. The Tip Top® is a disposable cone shaped cap that fits all standard 13 or 16 mm blood collection tubes. A small opening allows you to dispense a sample without removing the Tip Top cap so you can prepare smears on slides or dispense into reagent wells or microcentrifuge tubes safely. Inside the tip of the Tip Top® is an integral porous filter that removes fibrin from the blood sample allowing for a perfect smear.
Tip Top® is a convenient alternative to pipetting from an open blood tube, just tilt the tube and squeeze to dispense one drop. And Tip Top® is safe you don't need to open the tube and pipet out of the tube so spillage is reduced along with potential exposure to infectious disease. Just carefully remove the stopper and replace with Tip Top®.
The Tip Top® dispenser cap can be used with almost any liquid. Made from chemically resistant polyethylene they can dispense serum, reagents, plasma, whole blood and CSF. The integral porous polyethylene filter efficiently separates serum and can also be used a a reagent blender.
Fits standard 13 x 100 and 16 x 100 collection tubes.
Proudly made in the USA! Click here for more made in America products!
As of 06/26/23 The items below are being discontinued and will no longer be available when existing supplies are exhausted.
3911-545-000-9 | PurePlus® 1.2 mL Sample Library Tubes, In Strips of 8, in 96 Racks, Sterile
3912-545-000-9 | PurePlus® 1.2 mL Sample Library Tubes, In Strips of 12, in 96 Racks, Sterile
3913-855-000-9 | PurePlus® Cap Strips for 1.2 mL Sample Library Tube, In Strips of 8, Sterile
3914-845-000-9 | PurePlus® Cap Strips for 1.2 mL Sample Library Tube, In Strips of 12, Sterile
3915-800-000-9 | PurePlus® 1.2 mL Individual Sample Library Tubes, In Reusable Bags, Non-Sterile
3916-800-000-9 | PurePlus® 1.2 mL Sample Library Tubes, In Strips of 8, In Reusable Bags, Non-Sterile
Labcon PurePlus® Sample Library Tubes
All racked tubes include rack lids.
- ATP, RNase/DNase, and Endotoxin Free (non-pyrogenic)
- Freezable (-80°C)
- Autoclavable (122°C, 15 minutes)
- Made of polypropylene
PurePlus® Sample Library Tubes are designed for long-term specimen storage. Caps and tubes come in different packages. Separate closures strips are available. 96 tube format with printed alphanumeric grid and a clear lid.
Library tubes available as: Individual tubes, 8-well, and 12-well tube strips.
All racked tubes include rack lids. Tube closures are sold separately.