PR1MA™ Microcentrifuge Tube Aluminum Cooler Racks

• Keep Microcentrifuge Tubes cold or hot on the bench
• Non-Skid rubber feet provide a stable platform for loading samples
• Gets cold in as few as 25 minutes
• Samples stay cold on your bench top for up to an hour
• Small footprint minimizes bench top and freezer space used
• Precisely drilled wells allow for maximum heat transfer between the block and samples

Microcentrifuge, Tube, Aluminum, Cooler, Racks, PR1MA, MIDSCI, Laboratory Supplies, High-Quality, Research, Consumables, Reagents, Equipment, Customer Service, Quick Shipping, Satisfaction Guarantee, Personalized Solutions, Universities

PR1MA™ Cryo Tube Aluminum Cooler Rack

• Keep Cryo Tubes cold on the bench
• Non-Skid rubber feet provide a stable platform for loading samples
• Gets cold in as few as 25 minutes
• Samples stay cold on your bench top for up to an hour
• Small footprint minimizes bench top and freezer space used
• Precisely drilled wells allow for maximum heat transfer between the block and samples

PR1MA™ PCR Aluminum Cooler Racks

• Keep PCR Tubes, Strip Tubes, and PCR Plates (96 & 384) cold or hot on the bench.
• Non-Skid rubber feet provide a stable platform for loading samples.
• Gets cold in as few as 25 minutes.
• Samples stay cold on your bench top for up to an hour.
• Small footprint minimizes bench top and freezer space used
• Precisely drilled wells allow for maximum heat transfer between the block and samples

Specifications 

PCR, Aluminum, Cooler, Racks, PR1MA, MIDSCI, Laboratory Supplies, High-Quality, Research, Consumables, Reagents, Equipment, Customer Service, Quick Shipping, Satisfaction Guarantee, Personalized Solutions, Universities

PR1MA™ Card Board Freezer Boxes and Inserts

• Used for upright freezer or chest freezer racks
• Temperature Range: -196 to +121ºC
• Box has drain holes on bottom and a writing area on the lid
• Standard 5.25 x 5.25 x 2-inch format, Also available in 3 and 4 inch format
• Available cell dividers: 144, 100, 81, 64, 49, 36, 25, or 16

Specifications

PR1MA™ CoolCube™

• Maintains 0°C for up to 4 hours
• Also for use as a PCR workstation
• Two sides, ideal for: 1.5 & 2.0 mL microtubes, 0.2 mL PCR tubes & strips, 96 well PCR plates 

The PR1MA™ CoolCube™ is designed to store samples safely on the lab bench without sample degradation due to temperature increase or fluctuation. Simply place the CoolCube™ in a freezer overnight and it’s ready for use, keeping samples cold, but not frozen maintaining temperature at approximately 0° C for up to four hours.

Specifications

Proudly made in the USA! Click here for more made in America products!
 

CoolCube, PR1MA, MIDSCI, Laboratory Supplies, High-Quality, Research, Consumables, Reagents, Equipment, Customer Service, Quick Shipping, Satisfaction Guarantee, Personalized Solutions, Universities

PR1MA™ Autoclavable Boxes

Benefits of PR1MA™ Autoclavable Boxes

• Easy to stack and carry
• Hinged lid
• Fits our easy PR1MA™ reload/refill system
• Won't tip over when you hit the corner tip
• Easy to open with one hand

BetterBox™ Microtube Storage Boxes

Secure, Stackable, and Autoclavable Storage for 1.5 mL & 2.0 mL Tubes.

Keep your lab organized with BetterBox™, a premium-quality microtube storage solution designed for secure, efficient, and space-saving storage. Made from durable, autoclavable virgin polypropylene, each BetterBox™ holds 81 microcentrifuge tubes (1.5 mL or 2.0 mL) in a precise 9 x 9 grid, compatible with both snap-cap and screw-cap styles.

Featuring a hinged lid with a locking clasp, the BetterBox™ prevents lid misplacement while ensuring safe closure. The removable tube rack insert allows the base to be filled with crushed ice or liquid, making it ideal for temperature-sensitive samples. With a frosted writing surface on the lid and front edge, sample labeling is simple and permanent marker-friendly.

Available in a vibrant rainbow pack of five colors with clear lids and bases, these boxes are freezer-safe to -80°C and designed for easy stacking. Unique interlocking corner feet securely align with grooves on the lid, making stacking stable and transport hassle-free.

Key Features

• Holds 81 microtubes (1.5 mL or 2.0 mL) in 9 x 9 format
• Autoclavable and freezer-safe to -80°C
• Snap-cap and screw-cap tube compatible
• Hinged lid with locking clasp – never lose the lid
• Removable insert – add crushed ice or liquid
• Alphanumeric grid labeling for quick tube ID
• Stackable with interlocking corners for safe transport
• Available in five bright colors for easy sample categorization
• Box Dimensions (D x L x H): 160 x 150 x 54 mm (6.30 x 5.91 x 2.13 In.)

Perfect for labs needing organized, color-coded, and temperature-flexible microtube storage, the BetterBox™ sets a new standard in convenience and reliability.
 

IceRack™ Crushed Ice Microtube Racks

IceRack™ Crushed Ice Microtube Racks are a practical solution for keeping temperature-sensitive samples stable during processing. Each rack features a removable white microtube tray that allows the blue polypropylene base to be filled with crushed ice or other cooling materials. This creates an insulated environment to protect samples from temperature fluctuations during handling.

Compatible with both screw-cap and snap-cap microtubes ranging from 0.5 to 2.0 mL, the IceRack™ is ideal for use in molecular biology, clinical diagnostics, and other cold-sensitive workflows.

A translucent lift-off lid helps maintain internal temperature while providing easy visibility and access to samples. Made from durable polypropylene, the racks are autoclavable and withstand temperatures from -80 to 135°C, offering long-term performance and versatility.

Key Features

• Designed for crushed ice or cooling beads – Ideal for cold sample processing
• Fits 0.5 mL to 2.0 mL microtubes – Screw-cap and snap-cap compatible
• Durable polypropylene construction – Withstands -80 to 135°C
• Removable tube tray – Fill base with ice or cooling media
• Translucent lift-off lid – Easy visibility and access
• Economical 6-pack – Great value for any lab 

IceRack™ Microtube Racks are a cost-effective and efficient way to maintain sample integrity during temperature-sensitive procedures.

Specifications
 

Item #	R8012	R8013	R8014
Material	Polypropylene
Temp. Range	-80°C to 135°C (-112 to 275ºC)
Dimensions (D x W x H)	7 × 3.75 × 2 In. 177.8 x 95.25 x 50.8	7 × 3.75 × 2 In. 177.8 x 95.25 x 50.8	6 × 6 × 2 In. 152.4 x 152.4 50.8

 

MTC™ Bio Cardboard Freezer Boxes for 5 mL MacroTubes®

Durable, Eco-Friendly Storage for 5 mL Tubes.

MTC™ Bio’s 5 mL MacroTube® Cardboard Freezer Boxes provide a durable, eco-conscious solution for cold storage of 5 mL tubes. Made from recyclable cardboard with a liquid-resistant outer coating, these boxes are designed to perform in demanding lab environments. Each box ships fully assembled for immediate use and features liquid nitrogen drainage slots to prevent moisture buildup during ultra-low temperature storage.

Choose from two configurations

• 5 x 5 grid for 25 x 5 mL Snap-Cap tubes
• 6 x 6 grid for 36 x 5 mL Screw-Cap tubes

Both versions include an attached hinged lid and alpha-numeric coding for easy sample identification. A durable polycarbonate version is also available, ideal for extended use across extreme temperatures ranging from -196°C to +121°C.

Key Features

• Made from recyclable cardboard with liquid-resistant coating
• Shipped fully assembled for convenience
• Available in 5 x 5 (25 Snap-Cap) or 6 x 6 (36 Screw-Cap) configurations
• Numbered grid and alpha-numeric coding on all sides
• Includes hinged lid for secure storage
• Liquid nitrogen drainage slots for cryogenic applications
• Optional polycarbonate version (-196°C to +121°C temp. range)

MTC™ Bio Cryogenic Boxes with Hinged Lid

Polycarbonate, Autoclavable, Ultra-Low Temp Storage Boxes.

Cryogenic Boxes with Hinged Lids offer durable, long-term storage for 1.2 to 2.0 mL cryogenic vials, making them an ideal replacement for traditional cardboard freezer boxes. Constructed from high-strength polycarbonate, these boxes are built to withstand extreme temperatures from -196 to 121°C, including exposure to liquid nitrogen (LN) and autoclaving.

Designed for compatibility with standard 5.25 In. (133 mm) freezer racks, each box features a clear, hinged lid with printed alphanumeric indexing for fast and accurate sample identification. Drainage slots in the base allow safe use in LN vapor phase environments, enhancing safety and usability in cryogenic storage workflows.

Key Features

• Fits 1.2 to 2.0 mL cryogenic vials
• Polycarbonate construction – Withstands -196 to 121°C
• Fully autoclavable for sterility and reuse
• Clear hinged lid with printed index for easy sample tracking
• Standard 133 mm size fits all common freezer racks
• Drainage slots for LN safety in vapor phase storage

Perfect for biobanking, clinical, and research labs, these cryogenic storage boxes provide rugged durability, temperature resistance, and organized sample management for long-term low-temperature storage.

Specifications
 

Item #	Capacity	Lid	Material	Dimensions
C2581	25 place (5 x 5)	Pull-Off Lid	Polycarbonate	5.25 x 5.25 x 2 In. 133.35 x 133.35 x 50.8 mm
R2281	81 place (9 x 9)	Hinged Lid	Polycarbonate
MID2100	100 place (10 x 10)	Hinged Lid	Polycarbonate

Test Tube Racks

These autoclavable test tube racks are ideal for a variety of widely used laboratory tubes and vials. Manufactured in two sizes, these racks accommodate tubes ranging from 12 - 17 mm in diameter, including test tubes, culture tubes, FACS tubes, large cryogenic vials, transport vials and more. Shipped in an economical flat pack, these racks snap together to create a sturdy and durable workstation.

Molded alphanumeric grids along the sides assist in easy organization of samples. Available in 60 or 90 place, these heavy-duty polypropylene racks are autoclavable and can be safely used in water baths without floating.

• 90-place (6 rows of 15) for 12-14 mm tubes
• 60-place (5 rows of 12) for 15-17 mm tubes
• Molded alphanumeric grids
• Autoclavable polypropylene

80 - Well Racks

The popular fraction-collector-plate style racks keep tubes in large wells with conical bottoms. This easy-access design makes this rack ideal for freezer storage and organization. Available in natural, blue, green, pink, yellow, orange, or assorted colors (one of each).

• Holds 1.5 to 2.0 mL microtubes
• Versatile & efficient storage in bright, fluorescent colors
• Durable Polypropylene Construction
• Autoclavable

Specifications

Dimensions (D x W x H)	226 x 67 x 28 mm 8.90 x 2.64 x 1.10 in.
Max Tube Dimensions	11 x 26 mm 0.43 x 1.02 in.
Tube Size	Holds 1.5 to 2.0 mL Microtubes
Formation	80 Wells, 5 x 16

Proudly made in the USA! Click here for more made in America products!