S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
96-Place PCR Work Up Racks
96-Place WorkUp Rack and Lid (WR-96 Series)
The working storage rack for PCR processing holds 0.2 mL PCR tubes, strip tubes, and plates (does not fit full-skirted plates). Supplied with clear lift-off lids and designed with standard spacing. Available in assorted fluorescent colors: Blue, Green, Orange, Yellow, and Pink.
Stacking 96-Well PCR WorkUp Rack and Lid (WUR-96A)
PCR Rack fits 0.2 mL PCR tubes, strip tubes, or 96-well plates (including skirted plates). The polypropylene rack and lid click firmly for easy stacking and secure transportation/storage. Available in assorted colors: Blue, Green, Yellow, Violet, and Red.
- Accommodates non-skirted, semi-skirted, and skirted 96-well PCR plates
- Durable polypropylene construction
- Supplied lid clicks into place
- Operating temp: -80°C to 121°C
- Rack capacity options: One 96-well PCR plate, Ninety 0.2 mL PCR tubes, or Ninety-Six strip tubes
Proudly made in the USA! Click here for more made in America products!
This reversible rack comes with a simple-to-use removable hinged lid that snaps in place on either side of the rack. Rack and lid are molded out of autoclavable polypropylene. PCR® side of the rack has 168 wells that hold 0.2mL tubes. The wells will accommodate 8 or 12 tube strips or individual tubes. The opposite side of the rack has 40 wells that hold 0.5mL tubes. We have also placed 12 wells for 1.5mL tubes on both sides of the rack for your convenience. Available in natural or assorted colors (blue, green, purple, yellow, and orange). Packs of 5. PCR® is a registered trademark of Hoffman-LaRoche Inc.
Our rack is perfect for pre- or post-PCR® sampling applications. Sturdy polypropylene rack accommodates individual 0.2mL tubes or strips of 8 or 12 tubes. Tube wells are easily identified with imprinted numbers and letters. Features a removable hinged lid. Available in natural, blue, green, pink, yellow, or assorted colors (one of each). Packs of 5. PCR® is a registered trademark of Hoffman-LaRoche Inc.
PCR Cooler, 96 Well
Ice-Free Cooling System for PCR Preparation and Storage
- Modern design cools faster in freezers and stays cold longer on the bench top
- Maintains the entire 96-well plate at 0C for over an hour
- Maintains sample temperature of less than 5C for up to three hours (with lid off)
- When the temperature ceiling of 6C has been exceeded there is a contrasting color change of the cooler or a single well
- Cools industry standard format PCR tubes, strips and single format as all as most 96-well plates in both standard and low profile well shape
- Patented lid design provides seamless storage and transport by securely covering the PCR samples from the freezer to the bench top
- Innovative lid slides out, rotates 180 degrees, and becomes a convenient stand the cooler sits on
- Well design prohibits the freezing of samples
- Compact space saving design, stackable
- Cooler made from engineered polypropylene and lid is made from polycarbonate
- Two-year warranty
- Compatible with most robotics, designed to SBS standards
- Rigid skirt for gripping by robotic plate handlers
- Minimal warp and bowing
- Certified DNase/RNase, nucleic acid, and PCR-inhibitor free
- Fit most 384-well thermal cyclers
2025 LabValues Promotion!For a limited time enjoy discounted pricing on theAccuSeal™ Semi-Automated Plate Sealer (PS1000)!
Special price applies only to the specified item; no substitutions.
Cannot be combined with other discounts or pricing. Not valid on prior purchases.
Promo is valid 01/06/2025 – 06/30/2025 or while supplies last.
All terms and conditions apply.
AccuSeal™ Semi-Automated Plate Sealer
AccuSeal™ Semi Automated Plate Sealers from MIDSCI are engineered and constructed by Labnet International, Inc to maximize PCR, assay, and storage applications with a user-friendly panel and automated sealing options.
Great emphasis has been placed on incorporating a wide range of standard heights to deep well microplates with appropriate adaptors to efficiently fit the plates for consistent temperature regulation. The AccuSeal™ sealer is optimized for simple digital control and operation, user-friendly versatility and convenience as well as safety.
Controls and Operation
- Intuitive layout permits optimal sealing time, temperature and settings
- Includes a "No Heat" setting for pressure sealing applications
Versatility and Convenience
- Adaptors specific for a PCR plate or an assay plate accommodate a variety of fits
- Automatically adjusts heat for different height plates
- Provides uniform pressure for a quality seal with a special non-stick coating to prevent messy cleanup.
Safety
- Motorized drawer features safety switches and prevents injury to the user.
Specifications
| Dimensions | 6.75 x 12.75 x 14.25 in. |
| Weight | 24 Lbs |
| Sealing Temperature | OFF, 100 to 190 °C |
| Temperature Accuracy | +/- 1.00 °C |
| Temperature Uniformity | +/- 1.00 °C |
| Sealing Time | 0.5 to 10 sec |
| Compatible Plate Materials | PP (Polypropylene) PS (Polystyrene) PE (Polyethylene) |
| Compatible Plate Types | Standard Assay Plates Deep-well Storage Plates PCR Plates: skirted, semi-skirted, non-skirted |
| Maximum Plate Height | 45 mm |
| Compatible Sealing Film Types | Foil-polypropylene laminate Clear polyester-polypropylene laminate Clear polymer Thin clear polymer Foil-laminate Foil |
Adapters
| PS1000-PCR | AccuSeal™ PCR plate adapter for sealing PCR and 384 well plates |
| PS1000-ADAPT | AccuSeal™ Assay plate adapter for sealing assay plates |
Sealing Film
| PS1000-150 | AccuSeal™ Sealing Heat Sealing Film, Ultra Clear, Peelable, qPCR, 100 films/bx, 5 bx/cs |
| PS1000-200 | AccuSeal™ Sealing Heat Sealing Film for Low Temp, Peelable, PCR, 100 films/bx, 5 bx/cs |
| PS1000-300 | AccuSeal™ Sealing Heat Sealing Film for Storage, Pierceable, Aluminum, 100 films/bx, 5 bx/cs |
| PS1000-400 | AccuSeal™ Sealing Heat Sealing Film for Compound Storage, Peelable, 100 films/bx, 5 bx/cs |
| PS1000-GP300 | AccuSeal™ Sealing Heat Sealing Film w/ Paper Back, General, PCR, 100 films/bx, 10 bx/cs |
| PS1000-GP111 | AccuSeal™ Sealing Heat Sealing Film, Easy Pierce, 100 films/bx, 5 bx/cs DISCONTINUED - Please contact us for more options. |
SmartSeal™ Semi-Automated Microplate Sealer
- Fast, reproducible sealing of well plates
- Adjustable time, temperature and pressure for optimized sealing
- User friendly controls, load plate and press run to seal
- Accepts a wide range of plate types and heights, including deep well storage plates, assay plates, pcr plates, etc.
- Deep well (storage) plates up to 48mm tall
- Assay plates
- PCR Plates (skirterd, semi-skirted and non-skirted)
- Polypropylene polystyrene or Polyethylene plates
- Foil or polymer (transparent) seals
| Model | Accuris SmartSeal |
| Temp. Range | 80°C to 200°C |
| Temp. Accuracy | 1°C |
| Sealing Time | 0.5 sec. to 10 sec. (0.1 sec. increments) |
| Max. Plate Height | 48 mm |
| Dimensions | 17.8 x 37 x 33 cm / 7 x 14.6 x 13 in. |
| Weight | 9.5 kg / 21 lbs |
| Electrical | 115V or 230V, 50-60Hz, 300W |
PureAmp™ Sealing Films and Foils
For PCR, qPCR, ELISA & General Storage.
PureAmp™ Sealing Films are compatible with all standard PCR plates.
Film and foil options include standard adhesive pierceable aluminum, standard adhesive transparent, optically clear standard adhesive, optically clear non-tacky pressure activated adhesive, and low-adhesive EZ-peel, all of which are guaranteed to keep evaporation rates below 5%.
- Multiple types for PCR, qPCR, and ELISA
- All types available sterile or non-sterile
- Evaporation rates < 5%
- 10 inner bags of 10, 100 per pack
- Certified RNase, DNase, DNA, & PCR inhibitor free
SealPlate® RollMate™ Pre-scored Film in a Convenient, Easy to Use Roll Format
Pre-scored film on a roll is a more economical and efficient alternative to rapidly seal microplates or racked test tubes; faster than applying single sheeted film. Self-standing, non-slip supports hold the pre-scored film roll securely in place for quick and easy bench-top dispensement. The roll unwind tension can be easily adjusted to user preference. Continuous backing liner can be torn off or fed directly into a waste basket for disposal.
- Economical
- Quicker, more efficient sealing
- Provides a secure seal and is easy to remove
- Rigid polyester film features good clarity and easy handling
- Can be used as a temporary seal while awaiting further processing
- General laboratory use
- Short-term storage
- Incubation
- ELISA
- -40°C to +120°C
ThermalSeal® 2™ and ThermalSeal® Advanced Sealing Film
- Certified DNase- & RNase- free
- Ideal for use with flat-top, semi-skirted and full-skirted PCR plates
- Compatible with hard-shell dual component (e.g. polycarbonate/polypropylene) PCR plates
- Large cut allows for easier positioning of the film to the plate via edge of plate alignment vs. centering
- Available in a smaller cut for raised-rim and non-skirted PCR plates: ThermalSeal® Advanced
- PCR
- -40°C to +120°C
- Selection of the proper film size will minimize evaporation
- The film should not overhang or ride up the wall of a raised-rim plate
- More complete coverage of skirted flat-top plates will reduce evaporation in the outer wells
- End-tab removal before thermal cycling is highly recommended
Adhesive Sealing Films
Soft and impermeable aluminum sealing foils with medical grade acrylic adhesive. Once applied, the seal adheres aggressively, forming a tight positive seal preventing evaporation of VOCs, sample loss in storage, drying, cross contamination, and reducing the risk of aerosols and pathogens venting.
- Suitable for sealing all standard PCR plates, micro plates, and deep well blocks.
- Perfect for light sensitive samples
- Easily pierced with single or multi-channel pipettors and probes
- Withstands long term storage down to -80°C
- Single tabbed backing paper removes easily; aluminum sheet resist rolling back.
ThermalSeal® An Easier to Remove Sealing Film
ThermalSeal® features a moderate strength adhesive for ease of removal.
- Certified DNase- & RNase- free
- Only recommended for structurally rigid polypropylene PCR plates that don’t warp
- A less rigid polypropylene film that minimizes aerosols upon removal
- Features good chemical resistance
- PCR
- General storage
- -40°C to +120°C
Web Content Viewer
Actions