S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
Multi-Swipe™ Plate-Sealing Paddles
For sealing flat-top and raised-rim plates.
Application: Plate-sealing
Material: Polyethylene
The Multi-Swipe plate-sealing paddle ensures a secure and uniform, pressure-sensitive seal around all wells and is an economical alternative to plate rollers. Plate-sealing paddles are designed for use with all plate types.
- Reusable, recyclable
- The semi-soft, pliable sealing surfaces prevent the film/foil from being torn or ripped
- The non-flat contoured side is designed to go down to the plate; the center raised textured surface provides a non-slip finger hold
- Features two sealing surfaces: the shorter length fits inside the walls of raised-rim plates; the longer length is ideal for flat-top and deep-well plates
- Features two unique sized corner radii: 1/8 inch (0.3175 centimeter) and 1/16 inch (0.1588 centimeter) to seal around the plate perimeter; the tighter radii is for use with raised-rim PCR plates
Helpful Tips
- The printed side is used to seal the film to the plate
- Multiple swipes of the sealing paddle in both directions is highly recommended
- A 10 minute or greater dwell time at room temperature before processing increases the film-to-plate bond
Proudly made in the USA! Click here for more made in America products!Â
- Provides exceptional seal to safeguard samples during transport or storage
- Eliminates well to well contamination and cross-over in PCR applications when used with Axygen's compression mat
- Polypropylene film is wide temperature range compatible, -40° to 104°C
- PCR-TS is designed for ELISA/EIA applications
- CR-TS-900 is twice as thick (as PCR-TS) and is suitable for water-bath and other difficult PCR applications
AxyMat Sealing Mats
- Multi-use silicone sealing mats
- Natural color
- Autoclavable and washable
- Pierceable and self-sealing
AxyMat Sealing Mats
- Titer-Tops are pre-cut, adhesive films for sealing microplates to prevent sample evaporation, well-to-well contamination, and sample spillage.
- They are durable and thick (4.4mil), yet are easily pierced with a pipette tip for easy sample access.
- Made of a polyethylene film with an FDA approved non-cytotoxic acrylic adhesive that is waterproof, solvent resistant, and sterile.
- There are two scored end tabs for easy positioning and the film is chemically resistant and thermally stable.
- They stay solidly in place even when exposed to 100% humidity and extreme temperatures from -40°C to +100°C (Not recommended for use in thermal cyclers).
- Titer-Tops are easily marked with any writing instrument.
Sealing Mat Features:
- Multi-use silicone sealing mats
- Natural color
- Autoclavable and washable
- Pierceable and self-sealing
Sealing Mat Features:
- Multi-use silicone sealing mats
- Natural color
- Autoclavable and washable
- Pierceable and self-sealing
- Titer-Tops are pre-cut, adhesive films for sealing microplates to prevent sample evaporation, well-to-well contamination, and sample spillage.
- They are durable and thick (4.4mil), yet are easily pierced with a pipette tip for easy sample access.
- Made of a polyethylene film with an FDA approved non-cytotoxic acrylic adhesive that is waterproof, solvent resistant, and sterile.
- There are two scored end tabs for easy positioning and the film is chemically resistant and thermally stable.
- They stay solidly in place even when exposed to 100% humidity and extreme temperatures from -40°C to +100°C (Not recommended for use in thermal cyclers).
- Titer-Tops are easily marked with any writing instrument.
- Provides exceptional seal to safeguard samples during transport or storage
- Eliminates well to well contamination and cross-over in PCR applications when used with Axygen's compression mat
- Polypropylene film is wide temperature range compatible, -40° to 104°C
- PCR-TS is designed for ELISA/EIA applications
- CR-TS-900 is twice as thick (as PCR-TS) and is suitable for water-bath and other difficult PCR applications
Sealing Mat for 96 Square Well Microplate
- Sealing mats are available for the 96 well plates
- The mats seal each well individually
- Plates are DNAse/RNase free and supplied sterile or nonsterile
- Package Dimensions : 12 x 12 x 12 inches; 12 Pounds
- Chemical Resistance - use with confidence in any application requiring the presence of DMSO and similarly harsh solvents
- Specifically designed for Axygen deep well and microplates - complete system available for chemical assays
- Cost effective - can be reused
- Contains NO adhesives - no extractables to contaminate samples
- Tight seal to the plate - no sample evaporation or well-to-well contamination
- Usable within wide temperature range - from -80°C up to 121°C
- High contrast alphanumeric grid - for easy well identification
- Fits P-DW-11-C, P-DW-20-C, P-96-450R-C, P-96-450V-C
The polyester films are a great general purpose seal; ideal for sample protection and elimination of well-to-well sample cross contamination. The acrylic adhesive offers a strong bond that seals tightly on polypropylene and polystyrene plates.
This seal is ideally suited for short term storage, Elisa assays, prevention of sample loss, and general lab usage.
The paper backing of this film is scored on both ends to allow for two handed (precise) placement on the plate.
For PCR applications see our standard PCR film or our Real Time PCR film.
For applications where accessing samples through the seal with pipet tips or a probe is required, see the pierceable aluminum (MID-PCR-200) film.
Certified free of RNase, DNase, Pyrogen, and nucleic-acid contamination.
Length |
146.05 mm |
Length (w/ end tabs removed) |
119.05 mm |
Width |
79.38 mm |
Overall Thickness |
3.1 mil |
Adhesive Thickness |
1.1 mil |
Material |
Polyester |
Adhesive |
Medical Grade Acrylic |
Max. Temperature |
120 °C |
Min. Temperature |
-40 °C |
Primary Usages |
Elisa, Storage or Sample Cover |