S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
ActionsAzure Aqua Transfer Cell
Perform a quick 1 hour transfer or transfer overnight at a lower voltage
Aqua Transfer Cell is used for transferring two mini gels to membranes for Western blotting experiments (wet transfer). The transfer cassettes and electrode core are colored for directionality which makes transferring easy and straightforward.
Includes:
- 2 transfer cassettes
- 6 sponges
- 2 Azure Aqua cooling units
- Tank and upper lid with power cables
- Transfer Electrode Cores
Features
The transfer cassettes and electrode core are colored for directionality, making transferring easy and straightforward.
Chemical reagent compatibility
Keep all components of the Azure Aqua Transfer Cell away from chloroform, arenes (such as methylbenzene benzene), and acetone. Any damage caused by these reagents is not covered by the warranty policy.
Cleaning Instructions
Before using, wash all components with a neutral detergent and rinse well with ultra pure water.
Wash the electrode assembly, transfer cassettes, and buffer tank with a neutral detergent and warm water. Be careful to avoid damaging the platinum electrodes. Use warm water to rinse the sponges, and then rinse all components with distilled or ultra-pure water.
Specifications
Parameters | Azure Aqua Transfer Cell Specs |
Number of cassettes | 2 |
Buffer requirement | 1100 mL |
Electrode distance | 4 cm |
Electrode assembly size ( L x W x H) | 17.5 cm x 13.5 cm x 19 cm |
Transfer time | 60 minutes |
Cooling | Azure Aqua cooling unit |
Blotting area | 7.5 cm x 10 cm |
Buffer volume (with cooling unit) | 650 mL |
Buffer volume (without cooling unit) | 850 mL |
Unit dimensions (W x L x H) | 13.5 cm x 17.5 cm x 19 cm |
Tank buffer volume | 1100 mL |
Maximum gel size | 7.5 cm x 10 cm |
Gel capacity | 2 precast or handcast gels |
Weight | 1.8 lbs |
Recommended power supply | Azure Aqua Power Supply 600V |
Azure Aqua Power Supply
Designed for powering electrophoresis and Western blotting transfer modules
This power supply can create and save protocols for all your gel and blotting experiments. Designed with you in mind, features a pause/resume function for flexibility.
Power supply includes output range of 5–600V, 1–1200mA, 1–500W, LCD readable voltage, current, power, and four power connections to run multiple experiments at once. Able to control constant power, current, or voltage.
Features
The Azure Aqua Power Supply is a universal power supply that is designed for powering electrophoresis and transfer modules. The power supply can create and save protocols for all your gel and blotting experiments and includes a pause/resume function for flexibility.
Azure Power Supply includes an output range of 5-600V, 1-1200mA, 1-500W, LCD readable voltage, current, power, and 4 connections for electrophoresis and transfer.
Specifications
Parameters | Azure Aqua Power Supply 600V Specs |
Output specifications | 600V, 1.2 A, 500W |
Output range (programmable) | 10-600V 10-1200mA1-500W |
Type of output | Constant voltage, current, and power |
Timer control | 1 min – 99 hr 59 min |
Pause/resume function | Yes |
Output terminals | 4 connections |
Unit dimensions (W x L x H) | 24 x 30.5 x 10 cm |
Weight | 5.6 lbs |
Stackable | Yes |
Regulatory | CE |
Safety features | Automatic monitoring of over-voltage, no load, sudden change of load, overload, and short circuit |
Azure Aqua Quad Mini-Cell
Vertical Gel Running System
Designed for running 1–4 precast or hand-cast gels (cassette size 10cm x 8cm) for electrophoresis. The locking side fasteners provide a tight seal that ensures rapid and easy electrophoresis. The unit comes equipped with 4 gel casting stands and casting frames, perfect for hand casting your own gels.
Simply align the spacer and short glass plates, seal between the hinges, and allow your gel to polymerize. Insert the polymerized gel into the electrophoresis module for an efficient gel-running experiment.
Includes:
- 4 gel casting stands and casting frames buffer dam
- 5 spacer plates (1mm)
- 10 short glass plates
- 5 15-well combs
- 5 10-well combs
- 5 sealing gaskets
- 5 gel shovels
- Tank and lid with power cables
- Primary and Secondary Electrode Cores
Features
- The Azure Aqua Quad Mini-Cell is designed for running 1–4 precast or hand-cast gels (cassette size 10cm x 8cm) for electrophoresis. The locking side fasteners provide a tight seal that ensures rapid and easy electrophoresis.
- The unit comes equipped with 4 gel casting stands and casting frames, perfect for hand casting your own gels: Simply align the spacer and short glass plates, seal between the hinges, and allow your gel to polymerize.
- Insert the polymerized gel into the electrophoresis module for an efficient gel-running experiment.
Specifications
Parameters | Azure Aqua Quad Mini-Cell Specs |
Unit dimensions (W x L x H) | 13.5 cm x 17.5 cm x 19 cm |
Weight | 2.2 lbs |
Recommended power supply | Azure Aqua Power Supply 600V |
Number of gels | 1-4 precast (most major brands) or handcast gels |
Tank buffer volume | 2 gels: 540 mL | 4 gels: 1100 mL |
Maximum gel size | 6.7 cm x 8.6 cm |
Typical run times | 30-45 minutes at 200V |
Gel cassette size (WxL) | 10 cm x 8 cm |
- Molded, durable construction
- Rubber gates for easy, tapeless gel casting
- Adjustable height combs
- Loading guides aid in well visualization
Enduro Horizontal Gel Boxes have been designed for ease of use, safety and durability. A variety of sizes are available, from a mini gel system to a large maxi gel system that can accommodate as many as 450 samples in a single run. A wide range of accessories are available to customize your system, including multichannel compatible gel combs.
QUALITY CONSTRUCTION - The Enduro gel tanks are molded for leakproof performance and a long service life. The corrosion resistant platinum electrodes are located in cassettes to protect them during cleaning and provide for easy replacement. The lids fit on the gel boxes in only one direction. A drip ring on the lid recycles condensed buffer and prevents it from dripping directly onto the gel.
EASE OF USE - Casting gels for the Enduro system is very easy. Simply snap the rubber gates onto the ends if the tray, place the comb in position and pour the gel - no taping is necessary. Slots on the sides of the gel trays hold the combs in place. The two piece combs are designed so that the teeth can be raised or lowered to vary the depth of the well within the gel. The supplied combs are 1.5 mm thick. Combs of other thicknesses are available separately. After the gel has hardened, the combs and gates are removed and the gel and tray placed in the gel box. Loading strips may be placed on the bottom of the gel box to aid in well visualization. Gel trays are UV transparent.
DESIGNED FOR SAFETY - The power leads for the Enduro system are attached to the gel box lid. The connection with the electrodes is made only when the lid is properly in place. Removal of the lid removes power from the system. Side tabs and pressure pads make lid removal easy and prevent sloshing of buffer.
Product Specifications | ||
Enduro 7.7 | ||
Unit Dimensions | 9 x 21 x 9cm | |
Gel Size | 7 x 7cm | |
Maximum Samples | 32 | |
Buffer Volume | 225mL | |
Enduro 7.10 | ||
Unit Dimensions | 9 x 21 x 9cm | |
Gel Size | 7 x 10cm | |
Maximum Samples | 64 | |
Buffer Volume | 225mL | |
Enduro 10.10 | ||
Unit Dimensions | 12.5 x 22 x 9cm | |
Gel Size | 10 x 10cm | |
Maximum Samples | 100 | |
Buffer Volume | 300mL | |
Enduro 15.10 | ||
Unit Dimensions | 17.5 x 26.5 x 9cm | |
Gel Size | 15 x 10cm | |
Maximum Samples | 140 | |
Buffer Volume | 500mL | |
Enduro 15.15 | ||
Unit Dimensions | 17.5 x 26.5 x 9cm | |
Gel Size | 15 x 15cm | |
Maximum Samples | 210 | |
Buffer Volume | 500mL | |
Enduro 20.20 | ||
Unit Dimensions | 23 x 39.5 x 9cm | |
Gel Size | 20 x 20cm | |
Maximum Samples | 450 | |
Buffer Volume | 1200mL | |
Construction | Molded Acrylic | |
Safety | Unidirectional safety lid | |
UV Transparency | Gel tank, trays and lid | |
Gel Casting | Rubber gates supplies | |
Combs | Height-adjustable | |
Comb Thicknesses | 0.75, 1, 1.5 and 2mm |
Combs for E1015-10 & E1015-15
The Enduro 96 is an ideal complement to the Labnet Enduro Horizontal Gel Box line. The 96-well format unit is compatible with 8-channel pipettes and matches up with the standard 96 well plate configuration. The average run time is 15-30 minutes. The gel is in a 10 X 12 cm format with options for either 1 or 2 marker lanes. The layout of wells is designed to allow a run length of 1.8 cm per sample providing ideal separation. For those who already own an Enduro E1010, the Enduro 96 comb sets are available and compatible with these existing units.
Features include:
- 96 well format
- MCP compatible
- For high throughput analysis of PCR products
Specifications:
Gel Dimensions |
10 X 12 cm |
Unit dimensions |
22 X 12.5 X 9 cm |
Buffer Volume |
300 mL |
Max sample capacity |
96 samples plus 1 or 2 markers |
Combs/number of samples |
8 + 1X marker; 8 X 2X marker |
Thickness |
1; 1.5 mm |
Enduro™ Electrophoresis System
- Molded, durable construction
- Rubber gates for easy, tapeless gel casting
- Adjustable height combs
- Loading guides aid in well visualization
Enduro Horizontal Gel Boxes have been designed for ease of use, safety and durability. A variety of sizes are available, from a mini gel system to a large maxi gel system that can accommodate as many as 450 samples in a single run. A wide range of accessories are available to customize your system, including multichannel compatible gel combs.
QUALITY CONSTRUCTION
The Enduro gel tanks are molded for leakproof performance and a long service life. The corrosion resistant platinum electrodes are located in cassettes to protect them during cleaning and provide for easy replacement. The lids fit on the gel boxes in only one direction. A drip ring on the lid recycles condensed buffer and prevents it from dripping directly onto the gel.EASE OF USE
Casting gels for the Enduro system is very easy. Simply snap the rubber gates onto the ends if the tray, place the comb in position and pour the gel - no taping is necessary. Slots on the sides of the gel trays hold the combs in place. The two piece combs are designed so that the teeth can be raised or lowered to vary the depth of the well within the gel. The supplied combs are 1.5 mm thick. Combs of other thicknesses are available separately. After the gel has hardened, the combs and gates are removed and the gel and tray placed in the gel box. Loading strips may be placed on the bottom of the gel box to aid in well visualization. Gel trays are UV transparent.DESIGNED FOR SAFETY
The power leads for the Enduro system are attached to the gel box lid. The connection with the electrodes is made only when the lid is properly in place. Removal of the lid removes power from the system. Side tabs and pressure pads make lid removal easy and prevent sloshing of buffer.*Complete system includes gel system, 7 X 7 cm tray, and (2) 8 tooth combs
Enduro 7.7 |
|
Unit Dimensions |
9 x 21 x 9cm |
Gel Size |
7 x 7cm |
Maximum Samples |
32 |
Buffer Volume |
225mL |
Combs Included |
(2)Â 8 tooth combs |
Enduro 7.10 |
|
Unit Dimensions |
9 x 21 x 9cm |
Gel Size |
7 x 10cm |
Maximum Samples |
64 |
Buffer Volume |
225mL |
Combs Included |
(3) 8 tooth combs |
Enduro 10.10 |
|
Unit Dimensions |
12.5 x 22 x 9cm |
Gel Size |
10 x 10cm |
Maximum Samples |
100 |
Buffer Volume |
300mL |
Combs Included |
(2) 10 tooth combs |
Enduro 15.10 |
|
Unit Dimensions |
17.5 x 26.5 x 9cm |
Gel Size |
15 x 10cm |
Maximum Samples |
140 |
Buffer Volume |
500mL |
Combs Included |
(1) 16 tooth comb, (1) 20 tooth comb |
Enduro 15.15 |
|
Unit Dimensions |
17.5 x 26.5 x 9cm |
Gel Size |
15 x 15cm |
Maximum Samples |
210 |
Buffer Volume |
500mL |
Combs Included |
(1) 16 tooth comb, (1) 20 tooth comb, (1) 28 tooth comb |
Enduro 20.20 |
|
Unit Dimensions |
23 x 39.5 x 9cm |
Gel Size |
20 x 20cm |
Maximum Samples |
450 |
Buffer Volume |
1200mL |
Construction |
Molded Acrylic |
Safety |
Unidirectional safety lid |
UV Transparency |
Gel tank, trays and lid |
Gel Casting |
Rubber gates supplies |
Combs |
Height-adjustable |
Comb Thicknesses |
0.75, 1, 1.5 and 2mm |
Comb Included |
(2) 40 tooth combs, (2) 20 tooth combs |
Combs for units: for E1007-7 AND E1007-10
- POWER- 150v/400ma
- CONTROL- set voltage, amperage and time
- FLEXIBILITY - runs 6x6cm to 12.5x12cm gels
- THROUGHPUT - up to 112 samples at once
- CONVENIENCE - casting set and combs included
- WARRANTY: 1 year
Labnet's Enduro Gel XL includes all components necessary to cast and run horizontal gels: gel trays, combs, casting stand, gel tank and digital power supply. The migration tank, gel trays and multichannel combs are molded for leakproof performance and a long service life. The direct connection of the power supply into the gel box eliminates the need for power leads.
Pressing the eject button separates the gel box and power supply. Reconnecting is easy-just press the two pieces together. The power supply can be set to either constant voltage or constant current with automatic crossover between the two parameters. Parameters are shown on the large digital display that is easily visible from a distance.
There are three different gel options for the Enduro Gel XL; 12.5 x 12cm, 12.5 x 6cm and 6 x 6cm. One larger gel with multiple combs will accommodate up to 112 samples. Or run two small gels or four micro gels at the same time. Cassettes protect fragile electrodes from damage and allow for easy replacement.
A magnetic sensor allows current to flow to the electrodes only when the lid is in place. If the lid is removed while the system is operating, current is immediately shut down. In addition, the lid of the gel box is vented to dissipate heat produced during electrophoresis. To aid in visualizing the gel while it is running, there is a clear window over the gel platform.
Product Specifications
Overall dimensions (WxLxH) | 24.5 x 17.0 x 6.2 cm |
Gel tank dimensions (WxLxH) | 18.3 x 16.4 x 5.6 cm |
Power supply dim. (WxLxH) | 7.5 x 17.0 x 6.2 cm |
Maximum sample capacity | 112 (4-28 tooth combs) |
Gel capacity | Per run |
Large (12.5 x 12 cm) | 1 each |
Small (12.5 x 6 cm) | 2 each |
Micro (6 x 6 cm) | 4 each |
Buffer capacity | 300mL |
Input voltage | AC 100-240V, 50/60 Hz |
Output voltage | 10 - 150 V |
Output current | 10 - 400 mA |
Timer | up to 99 hours or continuous |
Memory | Last programmed parameters saved |
- Molded, durable construction
- Rubber gates for easy, tapeless gel casting
- Adjustable height combs
- Loading guides aid in well visualization
Enduro Horizontal Gel Boxes have been designed for ease of use, safety and durability. A variety of sizes are available, from a mini gel system to a large maxi gel system that can accommodate as many as 450 samples in a single run. A wide range of accessories are available to customize your system, including multichannel compatible gel combs.
QUALITY CONSTRUCTION - The Enduro gel tanks are molded for leakproof performance and a long service life. The corrosion resistant platinum electrodes are located in cassettes to protect them during cleaning and provide for easy replacement. The lids fit on the gel boxes in only one direction. A drip ring on the lid recycles condensed buffer and prevents it from dripping directly onto the gel.
EASE OF USE - Casting gels for the Enduro system is very easy. Simply snap the rubber gates onto the ends if the tray, place the comb in position and pour the gel - no taping is necessary. Slots on the sides of the gel trays hold the combs in place. The two piece combs are designed so that the teeth can be raised or lowered to vary the depth of the well within the gel. The supplied combs are 1.5 mm thick. Combs of other thicknesses are available separately. After the gel has hardened, the combs and gates are removed and the gel and tray placed in the gel box. Loading strips may be placed on the bottom of the gel box to aid in well visualization. Gel trays are UV transparent.
DESIGNED FOR SAFETY - The power leads for the Enduro system are attached to the gel box lid. The connection with the electrodes is made only when the lid is properly in place. Removal of the lid removes power from the system. Side tabs and pressure pads make lid removal easy and prevent sloshing of buffer.
Product Specifications | ||
Enduro 7.7 | ||
Unit Dimensions | 9 x 21 x 9cm | |
Gel Size | 7 x 7cm | |
Maximum Samples | 32 | |
Buffer Volume | 225mL | |
Enduro 7.10 | ||
Unit Dimensions | 9 x 21 x 9cm | |
Gel Size | 7 x 10cm | |
Maximum Samples | 64 | |
Buffer Volume | 225mL | |
Enduro 10.10 | ||
Unit Dimensions | 12.5 x 22 x 9cm | |
Gel Size | 10 x 10cm | |
Maximum Samples | 100 | |
Buffer Volume | 300mL | |
Enduro 15.10 | ||
Unit Dimensions | 17.5 x 26.5 x 9cm | |
Gel Size | 15 x 10cm | |
Maximum Samples | 140 | |
Buffer Volume | 500mL | |
Enduro 15.15 | ||
Unit Dimensions | 17.5 x 26.5 x 9cm | |
Gel Size | 15 x 15cm | |
Maximum Samples | 210 | |
Buffer Volume | 500mL | |
Enduro 20.20 | ||
Unit Dimensions | 23 x 39.5 x 9cm | |
Gel Size | 20 x 20cm | |
Maximum Samples | 450 | |
Buffer Volume | 1200mL | |
Construction | Molded Acrylic | |
Safety | Unidirectional safety lid | |
UV Transparency | Gel tank, trays and lid | |
Gel Casting | Rubber gates supplies | |
Combs | Height-adjustable | |
Comb Thicknesses | 0.75, 1, 1.5 and 2mm |
Combs for E1015-10 & E1015-15