Home  >  Lab Essentials  >  Lab Notebooks and Pens
|◀ ◀ 1 - 12 of 23 ▶ ▶|
View:

Color-coded for easy identification 

Each box is secured with a rust-resistant nickel-plated clasp and hinge pin. Available with either cork or foam lining. Each slot is numbered to correspond to the slide inventory sheet on the inside cover of the box. Boxes stack securely on top of each other, and are available in blue, green, red, yellow, white, gray, or black. Measures 8.75 x 6.75 x 1.3".

Item#:
ASSLIDES4

Glow-Writer Pen

Glow Writeris a fine-point phosphorescent ink marking pen for making experimental notations and other markings on chemiluminescent and radioisotope-labeled substrate materials (e.g., transfer membranes, dried gels, genomic and proteomic matrices, etc.) being analyzed by X-ray film autography or electronic imaging. The unique marker delivers a phosphor-containing ink through a fine point porous nib. Before exposure to X-ray film, the phosphorescent writing is excited by room light. A phosphor ink having an optimum concentration of phosphor and a relatively short afterglow halflife (approximately 2-3 minutes) has been selected so that upon exposure to X-ray film,autographic exposures of almost any duration will be easily readable on the film. The fine point nib is easily replaceable if it dries out.

Fine-Point Phosphorescent Marking Pen for Laboratory Autography

  • Fine Point Nib- Provides fine writing and greater information density
  • Specially Designed- Ideal glow intensity and afterglow duration helps prevent over-andunder exposure
  • No Ink Clogs- Low ink viscosity and porous nib prevents ink from clogging

Proudly made in the USA! Click here for more made in America products!
  

Item#:
ASPENS1
  • Permanent, Black Ink.
  • Water Resistant.
  • Quick Drying.
  • Fine Point For Identifying Racks, Vials, tubes, etc
Item#:
ASPENS2
  • Solvent Resistant Pens feature an ultra-permanent ink (122 Black and 130 Red only)
  • Resistant to xylene, alcohol, acetone and formalin
  • Ideal for histology and cytology
  • Ideal for use with our CryoTags and Tough-Tags. Markings will not run on frosted/painted labware, even after repeated washes and solution treatments.
  • Remove markings with acetic acid, an ethanol/xylene mixture or paraffin. Testing advised before use. Results may vary based on surface.
Item#:
ASPENS
3/pk

Double-Sided Adhesive Film for Laboratory Container Mounting

CONVENIENT - No more fumbling with clamps

VERSATILE - Use with rockers, shakers, incubators or nutators

STRONG - Easily rock and roll up to 300rpm and beyond*

LONG LASTING - Re-usable based on load capacity and vessel number

RESISTANT - Keeps on rockin' even in the prescence of most solvents and caustic agents

* RPM limits may vary based on load and vessel contact area. Test load recommended.

Size: 1.50" x 20' (38mm x 6m)

U of M: 1 Roll

Item#:
ROCK-2000
Your Price:
36.00
Each
Fine/UltraFine

The new "Twin-Tip Teeny Writer" does double duty. This unique pen has a fine tip at one end and an ultra fine tip at the other end. It will write on virtually any surface.

Item#:
TNY-TWIN
Your Price:
7.14
Each
Properly record your vital data 

For admissibility as court evidence, data on laboratory work, experiment details, and design and development. Use these notebooks to keep your indispensable data. Numbered pages include spaces for title, project number, book number, date, and witness signature. The covers of both books are water proof and chemical resistant. Both versions contain periodic and conversion tables in the back. Measures 8.5 x 11".
Item#:
ASNOTEBOOKS
Extra Fine

The "Original Teeny Writer" has an extra fine tip. Recommended for writing on all our labels for samples that will be stored at room temperature and not exposed to chemicals and/or caustic agents.

Item#:
TNY-WTR
Your Price:
7.14
Each

For Identifying Autograms (Radiological and Chemilluminescent)

  • Ideal for chemilluminescence and radiological autography
  • Great for documentation and archiving
  • Use your own codes & symbols
  • Fast & easy marking system
  • Non-radioactive

Radtape's phosphorescent, adhesive labels may be cut to the specific size and shape needed for each individual membrane, dried gel or microarray. An ordinary pen may be used to mark the label using the investigator's own codes and symbols. The custom label may then be peeled from its backing and affixed to the membrane, gel or microarray. Once placed against film, Radtape exposes a negative image of the markings directly onto the autorad, thus producing a permanent record of the experiment. Choose RadTape Plus for a heavy duty, water-proof alternative to RadTape.

Item#:
RAD-10
Your Price:
67.17
Each
This item is discontinued
18, 22 & 25mm sizes

Wash-N-Dry Coverslip racks hold a variety of coverslip sizes and offer a convenient way to clean and dry coverslips

    • CAPACITY-Coverslip rack holds 10 coverslips and offers fast and easy cleaning, surface-treating and drying.  Holds all coverslip sizes including 18, 22, and 25 mm.
    • DURABLE & HASSLE FREE-One piece polypropylene rack does not require assembly and is chemically and thermally resistant
    • AUTOCLAVABLE
    • SECURE-Innovative design includes a notch to secure coverslips with a rubber band or loop of monofilament
    • COMPATIBLE- Fits inside a 100 mL beaker with space underneath for a small stir bar when submerged
Item#:
WSDR-1000
Your Price:
32.50
Each

Color-coded for easy identification 

Each box is secured with a rust-resistant nickel-plated clasp and hinge pin. Available with either cork or foam lining. Each slot is numbered to correspond to the slide inventory sheet on the inside cover of the box. Boxes stack securely on top of each other, and are available in blue, green, red, yellow, white, gray, or black. Measures 8.75 x 6.75 x 1.3".

Item#:
ASSLIDES3

Immunohistochemistry Staining Trays
 

Application

The AT-12 Immunohistochemistry Staining Tray has been designed for immunohistochemistry slide staining in the lab. The 12-slide unit has an integrated dual well design reservoir to hold water below the slides when humidity is needed. The AT-12 is constructed entirely of solid black cast acrylic to block all light from the stained slides. Additional applications include microscopy, cytology, and hematology. Tray can be placed inside 37° C incubator.

  • Hold 12 slides
  • Integrated dual well reservoir can hold water when humidified storage is needed
  • Made from heavy-duty cast acrylic
  • Skid-proof rubber feet prevent sliding and facilitate sturdy stacking of trays
  • Black or clear lid versions available

 

Durable Construction

Cast acrylic is very durable and highly chemical resistant so this product will provide years of dependable service in the laboratory. The tray is constructed with rubber feet to promote the stacking of the trays to save space and won't allow stacked trays to slip.

Multiple Configurations

Additional staining trays are available including a 12-slide unit with a clear lid and 24 slide units with black or clear lids.

Made in the USA.

 

Item#:
ASSLIDES1
|◀ ◀ 1 - 12 of 23 ▶ ▶|
View: