PR1MA™ Mini Digital Incubator

• Digital temperature control
• Personal sized, 13 x 14.5″ footprint (20 L)
• Accepts bottles and flasks up to 2 L
• Internal outlet, for installation of shaker, rockers, etc.

With digital temperature control, the PR1MA™ Digital Refrigerated Incubator provides a convenient “set and walk away” operation, eliminating the need for external thermometers and repetitive “fine-tuning” of an analog control knob. Simply choose the desired temperature and the incubator immediately begins to heat up while accurately monitoring the chamber temperature and conveniently displaying the temperature in real-time on the large LED control panel.

Despite a modest footprint of 14.5 x 13″, the incubator features a large internal chamber, capable of storing flasks and bottles up to 2 Liters. In addition, the incubator includes two adjustable shelves and an internal outlet for powering small shakers, rockers, and other instrumentation. A mini nutating rocker (H3D1020) supplied with both flat and dimpled mats is available for the agitation of samples during incubation.

Specifications

 Models
 

Item #	Description
IN20-H	PR1MA™ Digital Incubator, Heat only (Ambient +1° to 60°C) 20 L, 100-240V
IN20-HC	PR1MA™ Digital Incubator, Heat + Cool (Ambient -15° to 60°C) 20 L, 100-240V
H2200-SH	Extra Shelf 10.5 x 8 in. for IN20-H or IN20-HC
H3D1020	Mini Nutating Rocker w/flat cord, 8 x 6 in. Platform, 115V

 

 
PR1MA™ Digital Refrigerated Incubator

• Digital temperature control
• Personal-sized, 13 x 14.5 inch footprint (20 L)
• Accepts bottles and flasks up to 2 L
• Internal outlet, for installation of shaker, rockers, etc.

With digital temperature control, the PR1MA™ Digital Refrigerated Incubator provides a convenient “set and walk away” operation, eliminating the need for external thermometers and repetitive “fine-tuning” of an analog control knob. Simply choose the desired temperature and the incubator immediately begins to heat up or cool down while accurately monitoring the chamber temperature and conveniently displaying the temperature in real-time on the large LED control panel.

Despite a modest footprint of 14.5 x 13″, the incubator features a large internal chamber, capable of storing flasks and bottles up to 2 Liters. In addition, the incubator includes two adjustable shelves and an internal outlet for powering small shakers, rockers, and other instrumentation. A mini nutating rocker (H3D1020) supplied with both flat and dimpled mats is available for the agitation of samples during incubation.

Specifications

Models
 

• Redesigned to accept two 1 L Flasks
• Increased temperature control up to 70°C 
• Instant clamp exchange with MAGic Clamp system
• Only 11 inches wide
• 2 year warranty 

The PR1MA™ Mini Incubated Shaker is the most compact shaking incubator in its class. Despite the remarkably small footprint, a large 11.5 x 9.5 In. work space accepts several platforms for use with a variety of vessels.

The standard platform (included) features a non-slip rubber-coated surface ideal for TC flasks, petri dishes, and staining trays.

The convenient MAGic CLAMP™ Platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes.

Specifications
 

IS-300 Platforms and Accessories
 

SureTemp™ Incubator Series

• Precision temperature control, up to 75°
• Dual-Convection technology, excellent uniformity and recovery
• Includes SureCheck™ temperature logger and software
• Stainless steel chamber with internal power outlet

The new SureTemp™ Incubator series provides the highest level of temperature control with uniformity and stability levels that are unmatched by competitive models in the same class.

Each incubator is equipped with the SureCheck™ data logging system for verification of chamber temperature. The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive. The data can be viewed and saved using the included SureCheck software. The recorded data can also be used to plot temperature points on a graph or exported to a spread sheet program for verification or storage/record keeping.

The SureTemp™ series offers Dual-Convection technology, allowing users to choose between mechanical convection mode for exceptional temperature uniformity OR gravity convection mode for longer incubations or drying or samples.

The heating elements are strategically located on multiple sides of the chamber.

*230V units are available upon request.   

Specifications

Temp Range	Ambient 5 to 75°C
Temp Accuracy	± 0.25°C*
Temp Uniformity	± 0.25°C*
Temp Increment	0.1°C
Temp Stability	±0.1°C
Timer	1 min. to 99 hours 59 min. (or continuous)
Chamber Material	Stainless Steel (316)
Electrical	120V or 230V, 50-60Hz
Power Consumption	40L: 420W / 70L: 520W / 130L: 670W

 
 

Item #	H2505-40	H2505-70	H2505-130
Capacity	40 L	70 L	130 L
Interior Dims	13.7 x 13.7 x 13.7 in. 35 x 35 x 35 cm	17.7 x 13.7 x 17.7 in. 45 x 35 x 45 cm	21.7 x 17.7 x 21.7 in. 55 x 45 x 55 cm
Exterior Dims	22.4 x 23.3 x 22.8 in. 57 x 59.2 x 58 cm	26.4 x 23.3 x 26.8 in. 67 x 59.2 x 68 cm	30.3 x 27.2 x 30.7 in. 77 x 69.2 x 78 cm
Weight	95 lbs. | 42 kg.	136.5 lbs. | 62 kg.	154.4 lbs. | 70 kg.

 
 

Benchmark™ INCU-SHAKER™ 10 L 

• Large platform 18 x 18 in., up to 5 x 2 L
• TOUCH screen control over time, speed and temperature
• Exceptional temperature uniformity
• Horizontally circular 19 mm orbit for aeration & mixing
• Instantly change flask clamps with MAGic Clamp™ accessories
• Optional shelf for Petri dishes, microplates, etc.
• Incu-Shaker 10 LR (Refrigerated) for temperatures down to RT -15°C

The Incu-Shaker™ 10 L provides digitally regulated temperature with orbital mixing optimized for culturing a variety of types of cells. The standard platform (included) features a non-slip rubber coated surface ideal for TC flasks, petri dishes, and staining trays. The convenient MAGic CLAMP™ Platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes.

Features a Touch Screen with 3 Control Views:

• Standard View
• Advanced Temperature View
• Advanced Shaker View

Specifications

Available Platforms for IS-1010 Incu-Shaker 

Flask Clamp Capacities

Haier CO2 Incubator

• 115V / 60Hz Sterilization
• Uniform and Stable Temperature
• Precise CO2 Concentration
• 180ºC Dry-heat Serialization
• Fast Environment Recovery      

Haier Biomedical IoT enabled CO2 incubator with 180°C dry heat sterilization provides a safe and secure reproducible growth environment for cell cultures.

Product Features

Precise CO2 Concentration Using New IR Sensor Control Technology

Haier Biomedical's new IR Sensor technology uses DIR measurement principles and withstands high temperatures of 190ºC. The silicon MEMS transmitter can carry out more than 300 dry heat sterilization cycles to extend the service life to 15 years. Built-in temperature and humidity compensation technology reduces the impact of changes of humidity and temperature without the need for calibration after the high-temperature sterilization. The five-point calibration yields a higher measuring accuracy and sensitivity with less drift.

Fast Environment Recovery for Optimal Cell Growth

Adopting active airflow control technology, and based on the fuzzy PID control principle, the parameters can be restored without overshoot. After opening the door for 30 seconds, the temperature and CO2 concentration can be quickly restored within 4 minutes. Even if multiple users share a CO2 incubator and frequently open and close the door, the stability and uniformity of the incubator can be ensured.

180ºC Dry-Heat Sterilization Technology Minimizes Contamination

Easy and effective sterilization of microorganisms including bacteria, fungi, and micro plasma with strong resistance, at 180°C high temperatures without the need for consumables. Simply press the “sterilization key” to activate and complete the sterilization process automatically in just 12 hours. Delivers sterility level within the chamber of all surfaces to meet WS/T367-2012 standards. All components are sterilized during the process, there is no need to dissemble internal components (including CO2 sensors) and decontaminate separately, thus avoiding secondary pollution.

Anti-Condensation Heating System to Reduce Pollution Risk

The door on the CO2 incubator radiates heat to the inner glass door, effectively preventing the glass door from forming condensation. The possibility of microbial contamination caused by the condensate water is eliminated.

Intelligent Control of Circulating Air Maintains Uniformity

Automatically adjusts the circulation of the airflow, optimizing the airflow to avoid air volatilization of samples and ensuring proper uniformity throughout the chamber.

Comprehensive Safety Alarm System

The system ensures the safety of experiments and processes by utilizing an independent temperature alarm system, including a sound light and remote reminder. Other alarms include CO2 concentration, door ajar, and water shortage.

SHEL LAB Drosophila Incubator

SHEL LAB Drosophila units utilize day/night controls along with LED lighting to provide an excellent environment for drosophila culture.

The cabinets are designed with a mechanical convection system to ensure a gentle and even air distribution. A programmable day/night temperature limit control ensures a proper and safe environment.

The energy-saving thermoelectric cooling system provides improved temperature uniformity and up to 78% less power than traditional compressor-based models.

These units are covered under a two-year warranty and are certified to current global safety standards.

• Precise Temperature Control - Superior Uniformity
• Independent Over Temperature Thermostat
• Door Ajar Alarm
• Temperature Range 15°C to 40°C

AccuTherm Fine-tune Speed Control Microtube Vortexing

AccuTherm Rapid Heating and Cooling Microtube Vortexing

• Shake and incubate samples simultaneously
• Interchangeable platforms for tubes and plates
• Fine-tune Speed Control
• Rapid heating and cooling

AccuTherm is a temperature controlled vortexer that uses peltier technology to rapidly heat and cool precious samples. The combination of heating/cooling with mixing makes the AccuTherm ideal for many life science research applications in the fields of molecular biology, biochemistry and clinical chemistry.

• Six (6) sturdy shelves that will not sag or bend under heavy loads.
• Microprocessor Control
• Viewing Window
• Accomodates Roller Bottle Apparatus
• Powder Coated White Interior
• Supplied with 6 Shelves
• 4 Interior Outlets
• 2 year limited warranty

Reach In The Model RI28 incubator provides extra-large capacities while minimizing the amount of floor space used. This large space is kept uniform by intergrating a highly responsive mircoprocessor with the appropriatly sized heating element. A totally independent secondary temperature controller offers the added security of over-temperature protection. Our unique forced air circulation system creates a one-pass circulation pattern that provides both exceptional temperature uniformity and rapid heat recovery. The chamber floors are ruggedly reinforced to support roller apparatus or shakers.

• New Design Concept - This versatile lab incubator was custom- developed for laboratories that need a dependable, compact incubator for cultures, test kits, and biologicals
• Advanced Styling - See-thru tinted acrylic door that enables the user to see the entire work space without opening the door. The exterior is attractive ivory baked-on enamel
• Temperature Stability - Temperatures can be maintained accurately and uniformly;  the sensitive heat controller maintains temperatures to 0.5°C.
• Large Capacity - Beakers, flasks, petri dishes and test tube trays can be processed at the same time
• Equipment - Chrome plated adjustable shelf and fixed bottom shelf. Additional shelves are available. Eighteen month warranty.
• UL and CUL approved
• Warranty: 18 months
  

The BINDER incubator of the BD series with gravity convection is the specialist in long-term and stable continuous operation. This incubator is specially designed for gentle incubation of organisms, as well as conditioning of heat-sensitive media or microbiological heating.
Features:

• Temperature range: ambient temperature plus 5°C to 100°C
• High temperature accuracy thanks to APT.line⢠technology
• Natural convection
• Controller with LCD display
• Electromechanical control of the exhaust air flap
• Inner door made of tempered safety glass
• 2 chrome-plated racks
• Units up to 115 L are stackable
• Class 3.1 integrated independent temperature safety device (DIN 12880) with visual alarm
• Ergonomic handle design
• USB port for recording data
• Excellent temporal and spatial temperature accuracy and high energy efficiency

Series BD Specifications: