Microplate Readers and Microplate Washer

MIDSCI carries a line of low cost microplate readers and microplate washers that don’t sacrifice quality, performance, nor reliability.

Are you looking for a microplate reader and washer? You’ve come to the right place. We carry microplate readers and microplate washers that are right for you. 
  
If you need a compact and economical microplate reader that works with your computer without a hitch, then the Chromate microplate reader is a good choice. 
  
Yet if you want some convenient artificial intelligence on your side, then take a look at the Accuris microplate reader instead. It has an intuitive screen and provides measurement data, interpretations, and calculated analyses on the screen after a reading. 
  
Of course if it’s a microplate washer you’re looking for, then the Stat Fax 2600 is superb. Other than the expected features for a microplate washer (and more), it’s also convenient to use and extra quiet! 
  
This is just the tip of the iceberg. We’ve got a lot more to offer.

View:

Lumate Microplate Luminometer


LuMate is a compact microplate glow luminometer. Its streamlined design with minimal footprint offers superb optics to fit any size lab bench. LuMate teams up with your PC to provide full access to high level software for curve fitting, reporting, and data storage to meet the requirements of modern laboratories. Instrument and software come ready to "plug and play" with your PC.

Easy & Automatic


Simply select an assay from the stored menu and load the plate. LuMate automatically reads the plate, precisely measuring and reporting the light output from each well. LuMate runs hormones and many other applications, with on-board calculations for point to point, linear and log regressions, and log logit modes. A built in reference assures continuous calibration.

Specifications

Optical
Detection Mode Glow Luminescence
Sensitivity/Detection Limit HRP 1 X 10-18 moles, ALP 1 X 10-21 moles
Linear Dynamic Range 106 RLU
Cross talk Less than 2.5 X 10-4
Detector Photomultiplier (PMT)
Spectral Response Range 300-650 nm
Peak Wavelength 400 nm
Vessel 96 wells in strip tray or plate
Electronic
PC connection USB port
Microprocessor eZ80
Plate Transport Stepper motor
Power Requirements 100V-250 AC, 50-60 Hz (auto-sensing)
Software
PC Interface LuMate Manager Software
Calculation Modes Multipoint calibration with Regression or Point to Point curve fit with Curve storage option; Relative Light units
Additional Features

User-programmable open system with curve plotting and editing

Selectable plate formatting with duplicates and end-reading selections

Multiple timed reading options

Automatic interpretation options

Alphanumeric test naming

Flags and error messages

Other
Certifications NRTL listed, CE marked
Enclosure All metal enclosure
Dimensions 7.5 X 8 X 16 inches (19 X 20.3 X 42 cm); 11 lbs (5 kg)
Item#:
4400
Your Price:
4400.00
Each

STAT FAX 3300 Biochemistry Analyzer

Stat Fax® 3300 is designed for the processing of biochemistries, tube method immune assays, and drug assays from human serum, plasma, or urine. A removable flowcell installs in the read well to provide extremely rapid fluid sampling with low carryover. A builtin vacuum pump and an external waste bottle with level sensing are supplied standard. When the Flowcell is removed, the instrument accepts standard 12 mm round tubes as well as 1 cm square cuvettes. The design of the instrument includes many features to minimize operator error, such as stable factory calibration, automatic zeroing, complete operator prompting, detailed labeling, pre-programmed calculations, visual and audible
feedback, flags and error messages, minimal maintenance requirements. Test parameters, and standard curves are stored in memory for later recall. The Stat Fax® 3300 will store up to 120 tests in memory to be recalled for later use and allows for creation of Levey-Jennings plots for QC. In addition, it will store 512 Patient Results, 512 Control Results, 20 Patients on Worklist, and 15 tests per patient.

 

SPECIFICATIONS:

Photometric

Linear Measurement Range:

0.0 to 3.5 (flow-cell mode)

  1. to 2.5 (tube or 1 cm cuvette)

 

Photometric Accuracy:

+/- (1% +/- 0.010) 0.0 through 1.5 ABS

+/- (2% +/- 0.010) 1.5 through 3.0 ABS

 

 

Stability:

Drift of no more than 0.005A in 8

hours/bichromatic

 

 

Light Source:

Tungsten Halogen, 10 Watt, with

automatic lamp saver

 

 

Standard Wavelengths:

340, 405, 505, 545, 580, and 630nm

alternate filters available from 330 to

750nm; an eight position filter wheel is optional

 

 

Filter Type:

IAD hardcoat interference, 10nm half

Bandpass

 

 

Tube Size:

12mm round is standard

 

 

Minimum Sample Volume:

1mL for 12mm round tube

250uL for flowcell

 

 

Display:

240x128 Graphic LCD w/ Backlight

 

 

Printer:

Thermal dot matrix with graphic capability

Power Requirements:

Auto-Switching Power Supply

 

 

Voltage source:

90 – 264 VAC

 

 

Certifications:

CE

 

 

Speed:

Reads, calculates and prints results, 3

seconds per tube

 

 

Calculation Modes:

Factor, Single Standard, Point-to-Point,

Regression, Index Mode

 

 

Test Storage:

Stores 120 tests. Stores all parameters

including wavelengths, calculations, unit

codes, linear and normal ranges rate

timing, standard values, test names, and

previous standard curve.

 

 

Dimensions:

40cm (L) x 37 cm (W) x 14 cm (H) lid

closed (30 cm lid opened), 14 lbs (6.4 kg)

Item#:
SF3300
Your Price:
3054.29
Each

CappWash plate washer is an ideal elisa plate washer for small scale work. Simple, compact and inexpensive. Fitting into even the tightest budget, Capp plate washer is a perfect alternative to dependence on department washers for washing micro plates and strips. Capp elisa plate washer works most effectively with a vacuum source.

Capp elisa plate washer requires no programming nor electrical wiring connections. It is made of a high-grade stainless steel and polypropylene, making it fully autoclavable and highly resistant to aggressive chemicals.

The unique Two-in-One Design of Capp elisa plate washer gives each tube 2 functions - delivery of the washing solution to the well and aspiration of the used solution back to the waste collection bottle. This is possible as each tube of Capp elisa plate washer consists of an inner tube that releases the distilled water washing solution into the wells for rinsing while the outer tube vacuums away the liquid upon completion of the washing procedure.

The washing process with Capp plate washer is as simple as it can be: Simply lower the tubes into the well then push the knob to fill and release the knob to empty. Now repeat for the desired amount of washings and move on to the next row.


Capp elisa plate washer is suitable for all well types. The plate washer can be set to the desired depth very easily by simply adjusting the two screws found on either side of the tubes

    • Easy to operate
    • Simple & robust design
    • Manual ELISA plate washer

    W-12 - CappWash plate washer 12-channel

    W-12KIT-115V - CappWash Kit including W-12, WP-115V, WB-1, WB-3, WB-4, and W-1000 (3 meters)

    CAPPWash Kit includes 12-channel plate washer, vacuum pump, wash-collection bottles and tubing. CAPPWash Microplate Washer is the ideal tool for small scale immune assays. Fitting into even the tightest budget, CAPPWash is a perfect alternative to dependence on department washers for washing microplates and strips.

      • Easy to operate
      • Simple and robust design
      • Fully autoclavable

    W-16KIT-115V- CappWash Kit including W-16, WP-115V, WB-1, WB-3, WB-4, and W-1000 (3 meters)

    W-16KIT-230V - CappWash Kit including W-16, WP-230V, WB-1, WB-3, WB-4, and W-1000 (3 meters)

Item#:
ASMICPLTWASH2

STAT FAX 2600 Microwell Plate Washer

The Stat Fax® 2600 is a microprocessor-controlled automatic microplate washer that accepts many types of standard microplates and micro strip trays. The instrument will accept microwells having flat-, round-, or V-bottom configurations. It automatically accommodates partially filled micro strip trays. Plates may be washed in the A to H direction (8 strips of 12 wells each) or in the 1 to 12 direction (12 strips of 8 wells each) depending upon the plate orientation in the carrier and the number of wash probes on the head. Instruments are available with user changeable wash heads. The 8-wash head is standard; 12-wash head is available as optional accessories.

The instrument is fully programmable to provide multistep combinations of dispense, aspirate, combined aspirate/dispense, and timed soak cycles. Each user-programmed test can have up to 20 steps, and the instrument is capable of storing approximately 50 separate tests in non-volatile memory. As a convenience feature, the instrument can be programmed to automatically perform a rinse operation at a particular time of day. The instrument may also be used in the direct mode whereby wash operations are selected via the built-in keypad. A feature allowing user-assigned well depth may also be used, if preferred to the automatic well sensing feature. For volumes larger than the capacity of the wells, or to reduce bubbles, a top-wash feature is included so the wash solution may be aspirated off the top as it is being dispensed.

In addition to the 8-probe combination dispense/aspirate wash head, each instrument is supplied with wash, rinse, and waste bottles utilizing integral electronic level sensors, and an aerosol shield. A stainless steel bottle rack is available as an optional accessory.

Specifications:

Physical:

8/12 probe microplate transport accepts flat,

round, or V-bottom wells, plates & strip trays;

8 probe aspiration and dispense head (12 probe

wash head optional)

Stainless steel plate bed

Transparent acrylic aerosol shield

Dimensions:

13.5" W x 16" D x 7.5" H (34.3 cm W x 40.6 cm D x 19 cm H)

Weight 18.5 lbs (8.39 kg)

Bottle Assembly:

One each Wash, Rinse and Waste bottles with

electronic level sensing on all bottles (2 Wash

Bottle option available); 13.5" W x 5.5" D x 10.5"

H ( 34.3 cm W x 14 cm D x 26.7 cm H)

Performance:

Residual (double aspiration):

3 μl per well

Dispense precision:

3% C.V. across 96 wells

Dispense accuracy:

Mean volume ± 3% from reference

Test Storage:

Approximately 50

Item#:
ASMICPLTWASH1

STAT FAX 4200 Microplate Reader

The Stat Fax 4200 Microplate Reader is a compact, microprocessor-controlled, multi-purpose
photometer system designed to read and calculate the results of assays, which are read in 96
well microtiter plates or strip trays. The microplate reader may be used for in-vitro diagnostics. It is a user-programmable open system with selectable plate formatting, alphanumeric test naming, automatic interpretation options, duplicate well options, curve plotting and editing, flags and error messages from which the user can create a menu of pre-programmed assays for instant recall. This instrument is intended to be used as a stand-alone instrument without a PC but it has a connection in the event a user wishes to download results.

Stat Fax 4200 reads monochromatically (optional) or bichromatically (optional) and has two
models:

  • Four-filter model (405, 450, 492, and 630 nm)
  • Six-filter VIS model (405, 450, 492, 545, 600, and 630 nm)

 

Substitute filters in the range of 405 nm – 750 nm are available on special order
models.

Stat Fax 4200 accepts all standard microplates. Trays containing microstrips may also be read
whether they are 12 wells in length, 8 wells or even partial strips.

The software allows the operator to create, edit and store assays. Standard
curves are also stored in this memory. Test protocols remain stored until either changed or
deleted by the user.

TheStat Fax 4200’s optical system provides an economical and low maintenance design which reads 8 wells simultaneously. A 96 well plate can be read and printed in the absorbance mode in approximately ten seconds. Light from a lamp installed in a sealed light-tight compartment is filtered using a rotating filter wheel. The filtered light is then divided into 8 channels using a fiber optic bundle. The plate carrier precisely positions each row of 8 wells into the optical path for reading. Light passing through the 8 wells is directed to 8 photo-detectors. The filter wheel moves to a second position to read the 8 wells at a second wavelength. Using bichromatic differential absorbance values corrects for optical imperfections in the plastic wells and removes the effects of meniscus and turbidity.

Specifications: 


Photometric

Linear Measurement Range:

0.0 to 4.0 Absorbance Units (A)

Photometric Accuracy:

+/- (1% +/- 0.010) 0.0 through 1.5 ABS

+/- (2% +/- 0.010) 1.5 through 3.0 ABS

Stability:

Drift of no more than 0.005A in 8 hours

Light Source:

Halogen lamp with lamp saver feature

Standard Wavelengths:

405, 450, 492, and 630nm. 6-filter: 405,

450, 492, 545, 600, and 630nm. Filter

options from 405nm to 700nm

Filter Type:

IAD hardcoat interference, 10nm half bandpass

Vessel:

Standard 96-well microplates, or strip trays

Electronic

Display:

Interactive touch screen 5.7” (14.5cm)

LCD, color graphic display

Printer:

Thermal 64 characters per line, plus graphics

Power Requirements:

100-240V AC, 1.2A, 50-60Hz (universal

input, auto sensing)

Interface:

USB mouse; USB port used for thumb

drive interface for firmware updates

(mouse not included; thumb drive not

Speed:

Reads absorbance of 96 wells in about

10 seconds

Calculation Modes:

Factor, Single Standard, Point-to-Point,

Regression, Cubic Spline, Cut Off Mode

Test Storage:

Stores 120 tests; stores all parameters

including wavelengths, calculations, unit

codes, linear and normal ranges,

standard values, test names, and

previous standard curve

Dimensions:

Approximately 13.5”Wx17”Dx8-1/4”H

(34.3cmx43.2cmx21cm) weight 12 lbs

(5.5kg)

Item#:
SF4200
Your Price:
3857.14
Each
  • Compact and economical
  • Reads absorbances of 96-wells in under 10 seconds
  • Streamlined design to fit any lab bench
  • Ready to "plug and play" with your PC

MIDSCI introduces Chromate, a compact 8-channel microplate reader. Its streamlined design with minimal footprint offers superb optics to fit any sized lab bench. Chromate and your PC team up to provide rapid reading and full access to high level software, reporting, curve fitting, and data storage to meet the requirements of modern laboratories. Instrument and software come ready to "plug and play" with your PC.

Photometric:
Linear Measurement Range:

-0.20 to 4.0 absorbance units (A)

Photometric Accuracy:
±1%
Stability:

Drift of no more than 0.005A in 8 hours

Light Source:

Remote halogen lamp source with lamp saver feature

Wavelengths:

Standard: 405, 450, 492, and 630nm

Filter options from 405nm to 700nm

Filter Type:

IAD hardcoat interference, 10nm half bandpass

Vessel:

Standard 96-well microtiter plates, or strip trays

Electronic:

Power Requirements:

115V or 230V, 50-60Hz (auto-sensing)

PC Connection

USB port

Speed

Reads absorbances of 96 wells in about 8 seconds

 
Software:

Calculation Modes:

Single-point calibration, point-to-point curve fit, polynomial regression, linear and sigmoidal regression (log & linear), cutoff absorbance, multipoint % absorbance

Additional Features:

User-programmable open system, selectable plate formatting, alphanumeric test naming, automatic interpretation options, duplicate well options, curve plotting and editing, flags and error messages

Dimensions:

7.25 x 7.25 x 16.5 inches

Weight: 10 lbs.
Warranty
1 year
   

This unit can be customized with upgraded filters or more filters. Please contact your Lab Consultant or our Tech Department at 800-227-9997 for more information. The item # would be 4300-CUSTOM and is not available to order on-line. Prices may vary. Lead time is 4-6 weeks on the Custom orders.

Item#:
4300
Your Price:
2428.00
Each
View: