Operating features

• 5°C above room temperature to 70°C
  
• Microprocess PID control/ Auto-tuning/ Calibration
  
• Digital timer: 1 min to 99 hr 59 min, delayed ON/ OFF
  
• Over-temperature limiter/ Door opening alarm
  
• 3 different temperature values memorable 
  
• Digital LED display (0.1°C resolution) with touch-sensitive keypads
  
• RS-232 interface available
  

  Constructional features

• Fully insulated dual-wall door with rubber magnetic seal gasket keep setting temperature. 
  
• Stackable two high using the stacking kit.(optional)
  
• Optimized sample inspection through a tempered inner glass door without affecting chamber temperature.
  
• Separable Detachable shelves and rounded inner chamber corners for easy cleaning.
  
• Highly durable incoloy heating element with fins that guarantee better radiation.
  
• Attach other electric instruments to the inside of the chamber through a side cable port.
  
• Cable port allow for control of the amount of airflow in the chamber.
  (dia 38mm/1.5°C, Provided silicon or rubber cap)

   

  Specifications

  Model IB-05G IB-15G IB-25G Chamber volume(L/cu ft) 60 / 2.1 102 / 3.6 151 / 5.3 Temperature Range(°C/°F) Amb. +5 to 70 / Amb. +9 to 158 Fluctuation1)(±°C/°F)at 37°C 0.1 / 0.18 0.1 / 0.18 0.2 / 0.36 Variation1)(±°C/°F)at 37°C 0.6 / 1.08 0.2 / 0.36 0.6 / 1.08 Dimension Interior dimensions (W x D x H) (mm/inch) 400x360x420 / 15.7x14.2x16.5 480x410x520 / 18.9x16.1x20.5 610x460x540 / 24.0x18.0x21.3 Exterior dimensions (W x D x H) (mm/inch) 595x555x745 / 23.0x22.0x29.0 675x605x855 / 27.0x24.0x34.0 805x655x885 / 32.0x26.0x35.0 Net weight(Kg/lbs) 45 / 99 55 / 121 62 / 136 Electrical Requirements (230V) 50/60Hz, 1.3A 50/60Hz, 2.2A 50/60Hz, 3.1A Cat. No. AAH21162K AAH21172K AAH21182K Electrical Requirements (120V) 50/60Hz, 2.8A 50/60Hz, 4.6A 50/60Hz, 6.4A Cat. No. AAH21166U AAH21176U AAH21186U

  1) Technical data (according to DIN 12880)

   

Series CB-S Solid.Line | CO2 Incubators with Hot Air Sterilization

Benefits

• Minimum risk of contamination thanks to +180 °C hot air sterilization
• Stable pH values thanks to drift-free CO2 IR sensor technology
• High humidity up to 95% RH
• Simple and fast cleaning thanks to a seamless inner chamber

Important characteristics

• Temperature range: +6 °C above ambient temperature to +50 °C
• Humidity range: 90 to 95% RH
• Auto-sterilization with hot air at +180 °C
• Humidification system with condensation protection
• CO2 gas mixing jet with Venturi effect
• CO2 sensor with infrared technology
• LCD to display temperature and CO2 along with additional information and alarms
• Internal data logger, measured values can be read out in open format via USB
• Tightly sealed inner door made of tempered safety glass
• Seamless stainless-steel inner chamber
• Perforated shelves, stainless steel
• Units are stackable with stacking adapter
• Troubleshooting system with visual and acoustic alarms
• Computer interface: Ethernet
• Zero-voltage alarm contact
• Can be stacked with CB model of the same size

Series CB-S incubators are suitable for routine cell cultivation applications: They are free from contamination due to 180 °C hot-air sterilization and reliable pH stability thanks to the drift-free infrared CO2 measurement system.

C series incubators: CO2 incubators with hot air sterilization
BINDER CO2 incubators provide optimum growth conditions for a range of cell cultures. The units guarantee an impressively low risk of contamination and are quick and easy to clean. Plus, thanks to their low running costs, BINDER CO2 incubators make for a sound investment.

C series CO2 incubators feature excellent growth conditions for cell cultures, having been designed for standard applications in the cell laboratory. The proven APT.line™ air jacket system and Permadry technology keep the incubator interior free from condensation, while the 180 °C hot air sterilization can be relied upon to ensure that bacteria and germs are killed, giving you maximum protection against contamination in the CO2 incubator.

CO2 incubators with hot air sterilization that are easy to clean
The incubator design features a seamlessly deep-drawn inner chamber and rounded corners, making it incredibly easy to clean. The two-part rack frames without screws add to this, while also ensuring that the incubator is user-friendly. When C series CO2 incubators are stacked on top of one another, you get an optimum ratio between stand space and usable space and 340 liters of incubation capacity, leaving you to carry out your laboratory work comfortably and efficiently.

Incredibly straightforward and efficient to use, C series CO2 incubators from BINDER provide ideal, reproducible growth conditions for cell cultures. Thanks to the hot air sterilization, spores and bacteria can be killed as necessary, and cells and tissue can be cultivated safely.

BENEFITS:

• Best Uniformity in Class
• Increased Volume of 5.9 cubic feet
• Hot Air Sterilization Cycle at 180°C minimizing the risk of contamination
• Maximum Saturation Without Condensation
• Stable pH-values thanks to drift-free CO2 IR sensor technology
• Easy cleaning thanks to seamless, deep-drawn inner chamber

MAIN FEATURES:

• Temperature range: room temperature plus 7°C to 50°C
• Humidity range: up to 95 % RH
• Auto-sterilization with hot air at 180°C
• Humidification system with condensation protection
• CO2 gas-mixing jet with Venturi effect
• CO2 sensor with infrared technology
• Display with 3-digit, 7-segment LEDs
• Door hinged right or left
• Tightly-sealed inner door made of tempered safety glass
• Seamless, deep-drawn inner stainless steel chamber
• 3 perforated stainless steel shelves
• Units are stackable with stacking adapter
• Troubleshooting system with visual and audible alarms
• Zero-voltage alarm contact

TECHNICAL DATA:

* All technical data is specified for unloaded units with standard equipment at an ambient temperature of +22 °C ±3 °C and a power supply voltage fluctuation of ±10%. The temperature data is determined in accordance to BINDER factory standard following DIN 12880, observing the recommended wall clearances of 10 % of the height, width, and depth of the inner chamber. All indications are average values, typical for units produced in series.

SHEL LAB CO2 High Heat

Standard Design Features:

• Infrared (IR) CO2_Sensor is extremely quick to recover CO2 levels after door openings and ensures superior pH stability.
• Unique air jacket design provides excellent temperature uniformity of +/-0.25°C at 37°C.
• Humidity levels maintained through evaporation of up to 95%
• Data logging capabilities
• Designed to minimize contamination; incudes:
• The fastest high heat decontamination cycle on the market without having to remove critical components
• Heated door to ensure superior temperature uniformity and also reduce the potential for condensation to form on the inner glass door
• Durable stainless steel chamber with coved corners for easy cleaning
• Exclusive heated copper CO2 inlet not only promotes temperature uniformity but also prevents moisture from being introduced into the chamber
• Copper shelving option
• Autoclavable shelving system
• Industry best warranty - 5 years parts and labor in the USA, 7 years on the IR sensor

AEOLUS™ Stackable 302L CO2 Incubator Shaker

AccuTherm Fine-tune Speed Control Microtube Vortexing

AccuTherm Rapid Heating and Cooling Microtube Vortexing

• Shake and incubate samples simultaneously
• Interchangeable platforms for tubes and plates
• Fine-tune Speed Control
• Rapid heating and cooling

AccuTherm is a temperature controlled vortexer that uses peltier technology to rapidly heat and cool precious samples. The combination of heating/cooling with mixing makes the AccuTherm ideal for many life science research applications in the fields of molecular biology, biochemistry and clinical chemistry.

• Six (6) sturdy shelves that will not sag or bend under heavy loads.
• Microprocessor Control
• Viewing Window
• Accomodates Roller Bottle Apparatus
• Powder Coated White Interior
• Supplied with 6 Shelves
• 4 Interior Outlets
• 2 year limited warranty

Reach In The Model RI28 incubator provides extra-large capacities while minimizing the amount of floor space used. This large space is kept uniform by intergrating a highly responsive mircoprocessor with the appropriatly sized heating element. A totally independent secondary temperature controller offers the added security of over-temperature protection. Our unique forced air circulation system creates a one-pass circulation pattern that provides both exceptional temperature uniformity and rapid heat recovery. The chamber floors are ruggedly reinforced to support roller apparatus or shakers.

• New Design Concept - This versatile lab incubator was custom- developed for laboratories that need a dependable, compact incubator for cultures, test kits, and biologicals
• Advanced Styling - See-thru tinted acrylic door that enables the user to see the entire work space without opening the door. The exterior is attractive ivory baked-on enamel
• Temperature Stability - Temperatures can be maintained accurately and uniformly;  the sensitive heat controller maintains temperatures to 0.5°C.
• Large Capacity - Beakers, flasks, petri dishes and test tube trays can be processed at the same time
• Equipment - Chrome plated adjustable shelf and fixed bottom shelf. Additional shelves are available. Eighteen month warranty.
• UL and CUL approved
• Warranty: 18 months
  

The BINDER incubator of the BD series with gravity convection is the specialist in long-term and stable continuous operation. This incubator is specially designed for gentle incubation of organisms, as well as conditioning of heat-sensitive media or microbiological heating.
Features:

• Temperature range: ambient temperature plus 5°C to 100°C
• High temperature accuracy thanks to APT.line⢠technology
• Natural convection
• Controller with LCD display
• Electromechanical control of the exhaust air flap
• Inner door made of tempered safety glass
• 2 chrome-plated racks
• Units up to 115 L are stackable
• Class 3.1 integrated independent temperature safety device (DIN 12880) with visual alarm
• Ergonomic handle design
• USB port for recording data
• Excellent temporal and spatial temperature accuracy and high energy efficiency

Series BD Specifications:

Important characteristics

• Temperature range: room temperature plus 5 °C to 100 °C
• APT.line preheating chamber technology
• gravity convection
• Adjustable exhaust air flap
• Controller with timer functions
• Inner door made of tempered safety glass
• 2 chrome-plated racks
• Stackable
• Class 3.1 independent temperature safety device (DIN 12880) with visual temperature alarm
• Computer interface: RS 422