S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
ActionsLab Ovens and Incubators
Your work is important. That’s why every incubator and laboratory oven from MIDSCI™ is reliably engineered and stringently tested.
MIDSCI™ has the incubator oven for your research applications. Manufactured by respected names like Labnet, Shel Lab, Lab Companion, BINDER, Benchmark, and more, these lab incubators deliver the performance you can rely on.
Features include excellent temperature uniformity and accuracy, rapid temperature recovery after opening, and over-temperature protection.
And if you’re looking for a lab oven, then you’ll have a wide selection to choose from.
We have gravity and forced convection ovens, hybridization ovens, and vacuum ovens.
MIDSCI™ also provides two options for hybridization ovens with shaking: Shake ‘n’ Bake hybridization oven from Boekel and Problot 12S hybridization oven from Labnet.
- Used for drying, baking, sterilizing, evaporating, heat treating, annealing and testing
- Quick run-up and recovery times
- Exterior has a hard, scratch-resistant hammer finish on a heavy steel double-wall construction
- Temperature is controlled by an automatic hydraulic or a bi-metal thermostat
- UL and CSA recognized
- Warranty: 18 months
Order # |
Capacity (Cu. Ft.) |
Max Temp |
Wattage |
Amps |
Inside Dimensions (in.)(WxHxD) |
Outside Dimensions (in.)(WxHxD) |
Shipping Weight (lbs.) |
10GC |
0.7 |
225 |
600 |
5.22 |
12x10x10 |
14x17x12 |
44 |
20GC |
1.27 |
225 |
800 |
6.95 |
13x13x13 |
15x21x15 |
61 |
30GC |
2.0 |
225 |
1200 |
10.43 |
18x16x12 |
20x25x14 |
78 |
40GC |
3.0 |
225 |
1600 |
13.91 |
18x21x14 |
20x30x16 |
94 |
Our high strength glass bottles are available in many size configurations to suit various hybridization applications efficiently. Manufactured of low beta emitting borosilicate, they reduce exposure to radioactivity. Exposure is further limited by the leak proof closure system.
Blue Cap = Polyethylene With O-Ring Seal; Temp. Resistance: -40°C to +140°C
Red Cap = Polyethylene With Teflon Seal; Temp Resistance: -45°C to +200°C
The CE Oven Series incorporates the Sure Load shelf system, triple wall construction, and easy-to-read microprocessor controls. Users can adjust the air exhaust from the chamber without being near the the heat source. Even at operating temperatures of 225°C, the outer skin of this unit meets all CE requirements, so workspaces remain cool.
The 99 hr 59 min digital timer has an independent control, so its use is optional. Once the timer expires, the heating elements turn off while the blower continues running to cool the samples inside the oven.
Whatever the application, these forced air ovens deliver precise uniformity, air distribution and the peace of mind expected from the SHEL LAB brand. All of the SHEL LAB CE series ovens are CE approved. The CE family is our lastest installment of a product of Constant Thinking.
These units include:
- Sure Load Shelf Design
- Non-Tip Shelves
- Microprocessor Controls
- Horizontal Air Flow
- Cool Touch Damper
- Digital Timer to 99hr and 59 min
- CE Approval
- Warranty: 2 years
SCO10A CO2 INC, AJ, HEPA, 10 CU FT, STACKED, 115 V
Model SCO10A is a stacked version of our SCO5A incubator and is ideal for sensitive tissue and cell culture applications. It provides the benefits of contamination control and uncompromising temperature uniformity for even the most demanding incubations.
Standard Design Features:
- Infrared (IR) CO2_Sensor is extremely quick to recover CO2 levels after door openings and ensures superior pH stability
- Unique air jacket design provides excellent temperature uniformity of +/-0.25°C at 37°C
- Humidity levels maintained through evaporation of up to 95%
- Data logging capabilities
Designed to minimize contamination; includes:
- Patented copper-caged HEPA filter
- Heated door to ensure superior temperature uniformity and reduce the potential for condensation to form on the inner glass door
- Durable stainless-steel chamber for easy cleaning
- Exclusive heated copper CO2 inlet to prevent moisture from being introduced into the chamber
- Copper shelving option
- Autoclavable shelving system
- Industry best warranty - 5 years parts and labor in the USA, 7 years on the IR sensor
Exterior Dimensions (W × D × H) |
27.5 × 28.5 × 75.6 |
Interior Dimensions (W × D × H) |
20.5 × 19.8 × 21.5 (521 mm × 503 mm × 546 mm) |
Volume |
5.0 cu.ft. (142 L) |
Shelf Dimensions (W × D) |
19.1 × 17.8 (485 mm × 251 mm) |
Unit Weight |
400 lbs (182 kg) |
Interior Metal |
301 SST |
Exterior Metal |
Painted Cold Roll Steel |
Operating Temperature Range |
Amb +5°C - 60°C |
Temperature Uniformity - Midrange |
0.25 °C |
Temperature Stability - Midrange |
0.1 °C |
Controller Type |
Digital |
Display Resolution |
0.1 °C |
Power Voltage , Frequency & Current |
110-120 VAC, 50/60 Hz, 6.0 Amps |
MAX HVAC Load |
2058 BTUs/hr |
Safety Certifications |
UL 61010-1, EN 61010-1, CSA 61010-1, CE |
SureTherm™ CO2 Incubator Series with IncuView™ LCI
- Precision temperature control
- 6-sided heating, ambient +5°C to 60°C
- Heated door and door frame
- Prevents condensation
- Excellent accuracy and recovery after opening the door
- Quick recovery of temperature and CO2
- Internal microscope option
- Monitor cells on the display or remotely on a smart device
Cell cultures depend on optimized growth conditions in order to thrive. With precise temperature and CO2 control, Benchmark's SureTherm™ Incubators provide the perfect environment for your cultures. All SureTherm™ Incubators feature a proprietary heat distribution system that combines six-sided heating with a low speed internal fan. Air is circulated uniformly throughout the chamber without air exchange from the external environment. This results in a controlled, protected environment with minimal temperature fluctuations (within 0.1°C). Two chamber volumes are available – 45 L and 180 L. The 180 L model also includes options for high heat decontamination, a split glass door and oxygen gas control.
These are the first and only incubators with the optional (patent pending) IncuView™ LCI (Live Cell Imaging) technology for viewing cells in "real time". An internal microscope and large, external display allow cells to be viewed without removal from the incubator, eliminating the inherent temperature fluctuations and risk of contamination. Cells are easily viewed on the large, integrated display or viewed locally or remotely with a Wi-Fi enabled phone, tablet or computer. Cell viewing requires the IncuView™ Integrated Microscope Shelf.
Incubator specifications
Temperature Range | Ambient +5°C to 60°C |
Temperature Accuracy | ±0.1°C |
Temperature Uniformity | ± 0.4°C |
Temperature Increments | 01°C |
Temperature Stability | 0.1°C |
CO2 Range | 0 to 20% |
CO2 Increment | 0.001 |
CO2 Accuracy | ± 0.1% |
CO2 Sensor | Dual Beam IR |
Heat Decontamination | Yes, Models 180HD and 180HDO2 only |
O2 Range | 0.5 to 20% (180HDO2 Model ONLY) |
O2 Accuracy | ±0.3% (180HDO2 Model ONLY) |
Chamber Dimensions 45 L (W x D x H) | 13.2 x 14.2 x 15.4 in. | 33.5 x 36.1 x 39.2 cm |
Chamber Dimensions 180 L (W x D x H) | 18.7 x 20.8 x 28 in. | 47.3 x 52.8 x 71 cm |
Chamber Volume | 45 Liter | 180 Liter |
Split Inner Door | 6 Compartments (180HDO2 Model ONLY) |
Chamber Material | Stainless Steel |
Exterior Dimensions 45 L (W x D x H) | 16.5 x 18.3 x 21.8 in. | 42 x 46.5 x 55.3 cm |
Exterior Dimensions 180 L (W x D x H) | 22 x 26.2 x 37.2 in. | 56 x 66.5 x 94.5 cm |
Weight 45 L | 77 lbs | 35 kg |
Weight 180 L | 172 lbs | 78 kg |
Electrical | 120 V or 230 V, 50-60 Hz |
Power Consumption | 300W (H3565-45) | 420W (H3565-180) | 700W (H3565-180HD) & (H3565-180HDO2) |
Warranty | 2 years |
Microscope Specifications
Magnification | 200X |
Field of View | 1 x 1 mm |
Resolution | 2 µm |
Image Format | 5MP (2592 x 1944 pixels) |
Video Format | MPEG-4, up to 1296 x 972 10 FPS |
Sample Vessels | clear flasks, dishes, plates <8 mm thick |
Optics | Brightfield or darkfield |
Sensor | CMOS |
Electrical | 5 V (powered by internal micro-USB) |
CelCulture® CO2 Incubators
- Contamination control with long life ULPA filters and 90°C moist heat decontamination cycle.
- Direct heat & air jacket design with gentle yet effective forced convection.
- Intuitive interfaces and intelligent data and event logger.
The CelCulture® CO2 Incubator is designed and manufactured using the accumulated expertise and knowledge that Esco has developed with over 35 years of world class equipment for laboratory usage. Designed with sample safety, energy efficiency and user-friendliness in mind, the system achieves precise parameter controls, highly effective contamination control and intuitive user interfaces all--supported by Esco's solution-based sales and service representatives worldwide.
Key Benefits
- CelSafe™ Contamination Control System provides unparalleled protection to your precious samples
- SteriSafe™ ULPA filtration enables the chamber air to be maintained at ISO class 5 conditions.
- All input gases are filtered by in-line filters before they enter the chamber to remove impurities and contaminants.
- The incubator's main body is made from electro-galvanized steel with Esco's unique ISOCIDE™ antimicrobial coating.
- SwiftCon™ moist heat 90°C decontamination cycle operates overnight to eradicate contamination in the unlikely event it occurs. At the end of the cycle, the chamber is dry and ready to use.
- CelAlert™ Alarm System reminds users of important tasks needed to protect their cultures
- CO2 tank depletion reminder in addition to CO2 tank-low alarm.
- ULPA-reminder will alert user to replace ULPA filter
VivoCell™ Precise Temperature, CO2 Control and High Humidity
- Best uniformity and control among available CO2 Incubators
- Fast CO2, temperature, and humidity recovery without overshoot.
- Direct heat design for rapid recovery, with 8 heaters grouped into 3 zones.
- Air jacket provides isolation against ambient temperature fluctuations.
- Filtered air circulates across water pan accelerating humidifying process and flows gently around culture plates, causing no disturbance to cell culture.
- Blower automatically stops when door is opened, to minimize mixing of chamber and room air. VentiFlow™ forced convection. accelerates recovery of chamber air to ISO Class 5 Cleanliness after door closing to prevent contamination.
Easy-to-Clean
- Chamber is made of stainless steel chamber with rounded corners enabling efficient and rapid cleaning.
- Ductwork, plenums and shelves are removable without tools for faster and easier operator maintenance.
- Glass door and inner gasket are removable without tools
This product is no longer available.
For a newer version of this product, visit here.
H3550-180, replacement is H3565-180
H3551-180P, replacement is H3565-180
H3551-45P, replacement is H3565-45
Benchmark CO2 Incubators
- Precision temperature control, 6-sided heating
- Precise monitoring over CO2 with dual beam IR sensor
- Seamless, stainless-steel chamber
- Digital control of humidity percentage (PLUS models only)
With our unique and proprietary heat distribution technology, the Benchmark ST Series of CO2 incubators provide the highest levels of temperature accuracy with minimal fluctuation (within 0.1°C). The six-side heating system, in combination with a low-speed internal fan, uniformly spreads air throughout the chamber (without air exchange from the external environment). The chamber walls are constructed of high grade (316) stainless-steel, and all corners are rounded, preventing the accumulation of dirt/debris.
For added security, all models feature an internal alarm to alert the user if the CO2 percentage changes, or the temperature fluctuates by more than 1°C from the set point. In addition, a quick-cal calibration button allows for quickly adjusting the chamber temperature to match that of a properly calibrated external thermometer.
Two series (standard and PLUS) are each available in 45L and 180L chamber sizes. PLUS models include advanced programming for high heat decontamination (at 125°C), a unique split inner glass door for access to the chamber without exposing it fully to the external environment and programmable humidity percentage, up to 95%.
Specifications
Temperature Range | Ambient +5° to 60°C |
Temperature Increments | 0.1°C |
Temperature Uniformity | ± 0.4°C* |
Temperature Stability | 0.1°C |
Temperature Accuracy | 0.1°C |
CO2 Range | 0 to 20% |
CO2 Increment | 0.10% |
CO2 Accuracy | ± 0.1% |
CO2 Sensor | Dual Beam IR |
Chamber Dimensions (45L) | 13.2 x 14.2 x 15.4 in. / 33.5 x 36.1 x 39.2 cm |
Chamber Dimensions (180L) | 18.7 x 20.8 x 28 in. / 47.3 x 52.8 x 71 cm |
Chamber Volume | 45L / 180L |
Chamber Material | Stainless Steel (316) |
Exterior Dimensions (45L) | 16.5 x 18.3 x 21.8 in. / 42 x 46.5 x 55.3 cm |
Exterior Dimensions (180L) | 22 x 26.2 x 37.2 in / 56 x 66.5 x 94.5 cm |
Weight (45L) | 77 lbs / 35 Kg |
Weight (180L) | 172 lbs / 78 Kg |
Electrical | 120V or 230V, 50-60Hz (350W) |
Warranty | 2 years |
PLUS Models Only
High Heat Decon | 125°C for 8 hours |
Humidity Control | Up to 95% |
Split Inner Door Compartments | 45L: 2 / 180L: 6 |
CO2 Incubator
- Chamber HEPA air filtration provides class 100 purification
- Infra-Red (IR) sensor precisely and reliably detects CO2 concentration
- Easy sterilization process at 140°C dry heat
- Temperature controlled door prevents condensation and provides higher temperature stability and uniformity
- Intuitive 7″ hi-res capacitive touchscreen
- Includes 4 shelves (can hold up to 13)
- Smart capabilities allow user to control CTI CO2 Incubator from a phone or tablet
- Visualize performance and changes over time with function performance graphs
- Audible and visual alarms alert user if parameters fluctuate outside set ranges
- 3 year warranty
The AIREA™ CO2 Incubator (CI-191CXA) is an air-jacketed, dry-wall insulation CO2 Incubator with temperature, CO2 concentration, and humidity functions. With this incubator, customers have the ability to visualize performance and data set on the AIREA™ Remote Monitoring accessory and app.
Specifications:
Model | CI-191CXA |
Product Name | AIREA™ CO2 Incubator 191 L, Dry Heat Sterilization, Touch Screen |
Capacity | 191 L (6.75 cuft) |
Temp. Range | Room Temp. Plus 5°C ~ 60°C |
Temp. Accuracy | ±0.1°C (@ 37°C) ±0.3°C max |
Temp. Uniformity | ±0.3°C (@ 37°C) ±0.6°C max |
CO2 Sensor | IR |
CO2 Concentration Range | 0 ~ 20% |
CO2 Concentration Accuracy | ± 0.1% |
Recovery Time after Opening Door | ≤ 6 min (@37°C) |
Relative Humidity Type | Natural Evaporation from Humidity Pan |
Disinfection | 140°C Dry Heat Sterilization |
Disinfection Duration | 12 Hours |
Direction of Door Swing | Right |
Display | 7″ Color Capacitance Touch Screen |
Protection for Set Parameters | Password Protected |
Data Display | 7 days |
Data Curve Display | Temp. Curve, CO2 Curve, RH Curve, Speed Curve (with CO2 Resistant Shaker) |
Max Number of Shelves | 13 |
Standard Number of Shelves | 4 |
Shelf Dimensions (D x W) | 472 x 472 mm (18.85 x 18.85 in.) |
Max Load per Shelf (When sliding in and out) | 15 kg (33.06 lb) |
Max Load per Shelf (Stationary) | 20 kg (40.09 lb) |
Insulation | Dry-Wall |
U Disk Download Date | Yes |
Data Storage | Most Recent 912 Days of Data |
Data Storage Increments | 1 min |
Data Storage Types | Time, Temp, Speed (with CO2 Resistant Shaker), RH, Machine Status |
Auto-Run after Power Recovery | Yes |
Noise Level | ≤ 53 dB |
Water Sparge Resistant | Yes |
Interface Languages | English / Chinese |
Volume of Humidity Pan | 3L |
Power | ≤ 1100 W |
Power Supply | AC 110 V / 60 Hz |
Mobile Monitor and Wifi Control | Optional |
PC Monitor and Control by RS485 | Optional |
Net Weight | 125 kg (275.58 lb) |
Outer Dimensions (D x W x H) | 670.50 x 699.50 x 1012 mm (26.40 x 27.54 x 39.84 in.) |
Chamber Dimensions (D x W x H) | 540 x 510 x 700 mm (21.26 x 20.08 x 27.56 in.) |
Temp. Alarm | Adjustable |
CO2 Alarm | Adjustable |
Chamber HEPA Filter | Yes |
AEOLUS™ CO2/Non-CO2 Compact Incubator Shaker -3mm
- 7” high-res color touch screen with intuitive graphic interface
- Innovative chamber design features smooth rounded internal corners for easy cleaning
- Infra-Red (IR) CO2 sensor for precise and reliable CO2 detection
- Optional WiFi and RS485 control
- UV lights for easy sterilization
- Audible and visual alarms
- Mirror finish, pharmaceutical grade stainless steel chamber
- Stackable design up to 3 units
- Also available in 25mm and 50mm orbit models
- Able to Stack with 25 and 50mm Orbit Models
SHEL LAB CO2 Water-Jacketed
Standard Design Features:
- Infrared (IR) CO2_Sensor is extremely quick to recover CO2 levels after door openings and ensures superior pH stability
- Unique water jacket design provides excellent temperature uniformity of +/-0.2°C at 37°C
- Humidity levels, maintained through evaporation, of up to 95%
- Data logging capabilities
- Designed to minimize contamination; includes:
- Patented copper-caged HEPA filter
- Heated door to ensure superior temperature uniformity and also reduce the potential for condensation to form on the inner glass door
- Durable stainless steel chamber with coved corners for easy cleaning
- Exclusive heated copper CO2 inlet not only promotes temperature uniformity but also prevents moisture from being introduced into the chamber
- Copper shelving option
- Autoclavable shelving system
- Industry best warranty 5 years parts and labor in the USA, 7 years on the IR sensor
Specificstions:
MODEL | SCO5W |
PART ID | SCO5W |
EXTERIOR DIMENSIONS (W × D × H) | 26 × 25.5 × 40.3 (661 mm × 648 mm × 1024 mm) |
INTERIOR DIMENSIONS (W × D × H) | 19.3 × 19.8 × 23 (490 mm × 503 mm × 584 mm) |
VOLUME | 5.1 cu.ft. (144 L) |
SHELF DIMENSIONS (W × D) | 19.1 × 19.1 (485 mm × 485 mm) |
UNIT WEIGHT | 254 lbs (115.2 kg) |
INTERIOR METAL | 300 SST |
EXTERIOR METAL | Painted Cold Roll Steel |
OPERATING TEMPERATURE RANGE | Amb +5C - 60C |
TEMPERATURE UNIFORMITY - MIDRANGE | 0.2 °C |
TEMPERATURE STABILITY - MIDRANGE | 0.1 °C |
CONTROLLER TYPE | Digital |
DISPLAY RESOLUTION | 0.1 °C |
POWER VOLTAGE , FREQUENCY AND CURRENT | 110-120 VAC, 50 /60 Hz, 5.0 Amps |
MAX HVAC LOAD | 2137 BTUs/hr |
SAFETY CERTIFICATIONS | UL 61010-1, EN 61010-1, CSA 61010-1, CE |
Series CB | CO2 Incubators with Hot Air Sterilization and Heat Sterilizable CO2 Sensor
- Maximum usable space with minimal footprint and excellent ease of use
- Minimum risk of contamination thanks to uncompromising hot-air sterilization
- Fanless, easy-to-clean hygienic interior
- Stable pH values thanks to drift-free CO2 IR sensor technology
- Low evaporation of the medium due to high levels of humidity and quick recovery time
Main Features
- Temperature range: from +4 °C above ambient temperature up to +60 °C
- Humidity range: up to 95% RH
- O2control range: 0.2 to 20 vol% O2 for versions with O2 control
- Auto-sterilization with hot air at +180 °C
- Double-pane humidification system with condensation protection
- CO2 gas mixing jet with Venturi effect
- Hot air sterilizable CO2 sensor with infrared technology
- Intuitive touchscreen controller
- Internal data logger, measured values can be read out in open format via USB
- Lockable door handle
- Tightly sealed inner door made of tempered safety glass
- Seamless stainless-steel inner chamber
- 3 perforated stainless-steel shelves
- Units are stackable with stacking adapter
- Troubleshooting system with visual and acoustic alarms
- Computer interface: Ethernet
- Zero-voltage alarm contact
The BINDER CB series CO2 incubator is the premium class among the CO2 incubators. It is suitable for all sensitive incubation applications and ensures optimal cell growth. A BINDER CB series CO2 incubator can perform complex cultivation experiments as well as specific environmental conditions.
CO2 incubators with hot air sterilization and heat sterilizable CO2 sensor
The Binder CB series is a world first! Fitted with a sterilizable CO2 sensor, the incubator meets the highest of standards when it comes to sample safety and cell growth. While C series CO2 incubators have been designed with standard laboratory applications in mind, the BINDER CB comes highly recommended for the incubation of delicate cells, providing optimum growth conditions for cell cultures.
Just like the C series units, the CO2 incubators in the CB series have the option of automatic sterilization with hot air at 180 °C. Plus, they have a heat sterilizable CO2 sensor with infrared technology and come with a double-pan humidification system with condensation protection. The units feature tightly sealed inner doors made of tempered safety glass and a lockable door handle, guaranteeing maximum safety conditions for work in the laboratory.
CO2 incubators with a patented humidity management system
CB series CO2 incubators have a patented humidity management system. The Permadry double-pan humidity system provides active humidity limitation that keeps even the interior walls dry. What's more, evaporation is kept to a minimum thanks to the high humidity.
These CO2 incubators are incredibly user-friendly, with the option to control all of the key parameters at once using the operating panel. Measured values are recorded continually and can be exported as data sets with ease via USB. Navigation is straightforward and intuitive.
The CO2 incubators with hot air sterilization and heat sterilizable CO2 sensor are ideal for the incubation of delicate cells, guaranteeing optimum conditions for cell cultures along with high levels of safety and usability.
Operating features
- 5°C above room temperature to 70°C
- Microprocess PID control/ Auto-tuning/ Calibration
- Digital timer: 1 min to 99 hr 59 min, delayed ON/ OFF
- Over-temperature limiter/ Door opening alarm
- 3 different temperature values memorable
- Digital LED display (0.1°C resolution) with touch-sensitive keypads
- RS-232 interface available
Constructional features
- Fully insulated dual-wall door with rubber magnetic seal gasket keep setting temperature.
- Stackable two high using the stacking kit.(optional)
- Optimized sample inspection through a tempered inner glass door without affecting chamber temperature.
- Separable Detachable shelves and rounded inner chamber corners for easy cleaning.
- Highly durable incoloy heating element with fins that guarantee better radiation.
- Attach other electric instruments to the inside of the chamber through a side cable port.
- Cable port allow for control of the amount of airflow in the chamber.
(dia 38mm/1.5°C, Provided silicon or rubber cap)Specifications
Model IB-05G IB-15G IB-25G Chamber volume(L/cu ft) 60 / 2.1 102 / 3.6 151 / 5.3 Temperature Range(°C/°F) Amb. +5 to 70 / Amb. +9 to 158 Fluctuation1)(±°C/°F)at 37°C 0.1 / 0.180.1 / 0.180.2 / 0.36Variation1)(±°C/°F)at 37°C 0.6 / 1.080.2 / 0.360.6 / 1.08Dimension Interior dimensions
(W x D x H) (mm/inch)400x360x420
/ 15.7x14.2x16.5480x410x520
/ 18.9x16.1x20.5610x460x540
/ 24.0x18.0x21.3Exterior dimensions
(W x D x H) (mm/inch)595x555x745
/ 23.0x22.0x29.0675x605x855
/ 27.0x24.0x34.0805x655x885
/ 32.0x26.0x35.0Net weight(Kg/lbs) 45 / 99 55 / 121 62 / 136 Electrical Requirements (230V) 50/60Hz, 1.3A 50/60Hz, 2.2A 50/60Hz, 3.1A Cat. No. AAH21162K AAH21172K AAH21182K Electrical Requirements (120V) 50/60Hz, 2.8A 50/60Hz, 4.6A 50/60Hz, 6.4A Cat. No. AAH21166U AAH21176U AAH21186U 1) Technical data (according to DIN 12880)